Can the car still be driven if it shows a tire leak?

2 Answers
AlexanderRose
07/29/25 1:12pm
The car should not be driven if it shows a tire leak. A leaking tire causes the tire pressure to drop too low, increasing the contact area between the tire and the road surface. This leads to abnormal temperature increases inside the tire while driving. Additionally, severe deformation of the tire sidewall accelerates the aging of the cord layers, creating a risk of blowouts. It also increases fuel consumption and reduces tire lifespan. In severe cases, it can damage the car's suspension, causing the vehicle to pull to one side, become unbalanced, or even roll over. Relevant information about car tires is as follows: 1. Car tires are one of the most important components of a vehicle, directly in contact with the road surface. Together with the car's suspension system, they help absorb shocks during driving, ensuring good ride comfort and smoothness. They also maintain good traction between the wheels and the road, improving the car's traction, braking, and off-road capabilities, while bearing the vehicle's weight. 2. The tread pattern is the only part of the vehicle that contacts the road surface. Due to prolonged friction with the road, the tread gradually wears down. When it reaches the replacement indicator, the tire should be replaced immediately.
Was this review help?
8
1
Share
ArthurDella
08/14/25 3:04am
Don't drive when you see the tire pressure warning light—it's really dangerous! Driving with low tire pressure increases friction, causes tire temperatures to soar, and makes blowouts much more likely, especially at high speeds where the consequences could be disastrous. You should immediately find a safe place to pull over, turn on your hazard lights, and get out to inspect the tires. Don't rush to keep driving—check if there's a nail puncture or a leaking valve stem. If you have a spare tire, change it right away; if not, call a tow truck or a repair technician for help. This isn't just about the tires—it affects your car's handling and your safety. Get into the habit of regularly checking tire pressure with a gauge to avoid trouble. Remember, don't push your luck—one accident could ruin your life.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What is the principle of a parking sensor?

The principle of a parking sensor is: during reversing, it utilizes ultrasonic waves. The sensor, installed on the rear bumper of the vehicle, emits ultrasonic waves that reflect off obstacles. The system then calculates the actual distance between the vehicle and the obstacle and alerts the driver, making parking or reversing easier and safer. Parking sensors are safety assistive devices for vehicles when parking or reversing. They inform the driver about surrounding obstacles through sound or more intuitive displays, eliminating the hassle of checking around the vehicle when parking, reversing, or starting, and helping the driver overcome blind spots and unclear vision.
14
3
Share

How to Turn on the Air Conditioning in an Audi Q7?

Audi Q7 air conditioning activation method: Press the button in the middle of the air conditioning panel. To activate cold air, press the AC button; for warm air, simply adjust the temperature higher or lower without pressing the AC button. More information about the Audi Q7 is as follows: 1. The Audi Q7 is a midsize to large SUV that emphasizes comfort, skillfully integrating sportiness, functionality, high technology, and luxury quality. On the road, it stands out with its infinitely dynamic handling and sporty characteristics. 2. The Audi Q7 is equipped with a four-wheel steering system. At low speeds, the rear wheels turn in the opposite direction during steering, reducing the turning radius and the width of the driving path; at high speeds, the rear wheels turn in the same direction, improving wheel response speed, dynamic performance, and stability. Additionally, the four-wheel steering system effectively assists the intelligent parking system and trailer assist system.
2
2
Share

How to reset the service wrench indicator on Landwind X5?

Landwind X5 service wrench reset procedure is as follows: 1. Press and hold the small button on the top of the wiper stalk. 2. After about 20 seconds, the next service mileage will appear. 3. Wait for a moment, and when returning to the main interface, you will see the service wrench indicator has been cleared. Additional information about Landwind X5: 1. Landwind X5 is China's first independently developed SUV equipped with 2.0T+6MT/8AT. 2. Landwind X5 is Landwind's all-new urban SUV model, featuring streamlined and sharp body lines with a very sporty overall design.
4
0
Share

How to Choose the Right Engine Oil Type for Your Car?

When selecting the appropriate engine oil type for your car, consider two key factors: temperature and driving conditions. In regions with low winter temperatures, opt for oils with a smaller number before the 'W'. For vehicles frequently driven at high speeds or older cars, choose oils with a higher viscosity coefficient after the 'W', preferably from premium brands. There are two main aspects to focus on when selecting engine oil: the oil grade and its viscosity. The oil grade can typically be found on the outer packaging of the oil container. Different grades are designed for different types of engines. Generally, engines with higher RPMs and vehicles with higher cylinder pressures demand higher-quality engine oil.
20
1
Share

Should You Use the Handbrake When Parking an Automatic Transmission Car?

Automatic transmission cars should use the handbrake when parking, especially on slopes, to prevent the vehicle from rolling away. Situations where the handbrake should be used include: 1. Engaging the handbrake when parking and turning off the engine; 2. Engaging the handbrake when parking in neutral. The handbrake, also known as the parking brake, provides resistance to prevent the car from rolling when parked. Automatic transmission cars do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions, listed from top to bottom as: P, R, N, D, S, L.
5
2
Share

How to Set One-Touch Window Lift for Geely Boyue?

The method to set one-touch window lift for Geely Boyue is: 1. When the vehicle is in OFF gear with the fuel tank cap, trunk, front hood, and all four doors closed, press and hold the lock button on the remote transmitter, and all four windows will simultaneously rise until fully closed; 2. Pull the window switch up to the manual lift position, and all four windows will close simultaneously. The Geely Boyue is a compact SUV launched by Geely Auto, with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. It is equipped with a 1.8T turbocharged engine with a maximum power of 120kw, paired with a 6-speed manual or 7-speed dual-clutch transmission.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.