Can the car owner be absent during the annual vehicle inspection?

1 Answers
JackDella
07/30/25 9:30am
Vehicle annual inspection does not require the owner's personal attendance and can be entrusted to others for processing. The following is an introduction to the required documents for vehicle annual inspection: 1. Introduction 1: Fill out the "Motor Vehicle Inspection Record Form". For private vehicles, in addition to the owner's signature, a copy of the owner's ID card must be attached. For company vehicles, a copy of the enterprise code certificate must be attached, and the "Power of Attorney" must be filled out and stamped with the official seal. 2. Introduction 2: The vehicle identification number rubbing paper should be pasted in the corresponding position on the "Motor Vehicle Inspection Record Form". 3. Introduction 3: Driving license. 4. Introduction 4: Compulsory traffic accident liability insurance policy for motor vehicles. 5. Introduction 5: Self-repaired vehicles or vehicles repaired by repair shops need to be stamped on the inspection form. New vehicles can be exempted from the first and second annual inspections.
Was this review help?
7
2
Share
More Forum Discussions

Where is the cabin air filter of the BJ80 located?

The cabin air filter of the BJ80 is located behind the glove compartment on the passenger side. To replace the cabin air filter, you need to remove the glove compartment. The cabin air filter is an important component of the car's air conditioning system, and this part also needs to be replaced regularly. If the cabin air filter is not replaced for a long time, it will affect the performance of the car's air conditioning and the health of the passengers. When using the car, it is necessary to replace the cabin air filter on time. Generally, cars require the cabin air filter to be replaced every 10,000 kilometers. The body dimensions of the BJ80 are 4765 mm in length, 1955 mm in width, and 2005 mm in height, with a wheelbase of 2800 mm.
1
1
Share

What is the fuel consumption of the Lincoln Nautilus?

There are a total of 6 models of the Lincoln Nautilus currently on sale. Among them, the 2021 2.0T Front-Wheel Drive Premium model, equipped with a 245 horsepower engine, has an NEDC fuel consumption of 8.1L per 100 kilometers. The 2021 2.0T All-Wheel Drive Reserve, California Coast Limited Edition, and Reserve Plus models, also equipped with a 245 horsepower engine, have an NEDC fuel consumption of 8.7L per 100 kilometers. The 2021 2.7T All-Wheel Drive Presidential and Black Label models, equipped with a 322 horsepower engine, have an NEDC fuel consumption of 9.6L per 100 kilometers. Many factors affect fuel consumption, but the decisive factor is the powertrain configuration. The Lincoln Nautilus is equipped with two high-performance engines: a 2.0T four-cylinder turbocharged engine and a 2.7T six-cylinder twin-turbocharged engine, delivering strong performance. The transmission is matched with either an 8-speed automatic or an 8-speed automatic manual transmission. The engine start-stop function of the Nautilus also significantly contributes to fuel economy. The battery has sufficient capacity to keep the engine in a stopped state during prolonged stops at traffic lights. The fuel tank capacity of the Lincoln Nautilus is 70L. The distance each model can travel on a full tank of fuel is as follows: 2021 2.0T Front-Wheel Drive Premium model: 70/8.1*100 = 864km. 2021 2.0T All-Wheel Drive Reserve, California Coast Limited Edition, and Reserve Plus models: 70/8.7*100 = 804km. 2021 2.7T All-Wheel Drive Presidential and Black Label models: 70/9.6*100 = 729km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel because larger displacements typically produce more power, requiring more gasoline to burn. Heavier cars also consume more fuel due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine control unit may use higher RPMs to warm up the engine, further increasing fuel consumption.
18
1
Share

What are the body dimensions of the ix35?

ix35 body dimensions: length 4435 mm, width 1850 mm, height 1680 mm, wheelbase 2640 mm. The ix35 offers two powertrain options: a 1.4T turbocharged engine and a 2.0L naturally aspirated engine. The 1.4T engine delivers a maximum power of 103 kW and a maximum torque of 242 Nm, while the 2.0L engine produces a maximum power of 118 kW and a maximum torque of 193 Nm. All ix35 models come standard with a rear spoiler, halogen headlights, and a full-size spare tire. The panoramic sunroof is only available on the Premium version, and manual transmission models do not have a sunroof.
7
3
Share

What does PAO engine oil mean?

PAO engine oil is a type of olefin-based engine oil, classified as a synthetic base oil. It is derived from ethylene and propylene, which are separated from natural gas or gas extracted from crude oil. These components undergo complex chemical reactions such as polymerization and catalysis to form large molecular structures that make up the base oil. PAO engine oil exhibits excellent viscosity-temperature performance and low-temperature fluidity, making it an ideal base oil for formulating high-grade and specialized lubricants. Engine oil is often referred to as the lifeblood of an engine, as it not only provides lubrication but also performs functions such as cleaning, sealing, buffering, heat dissipation, and rust prevention. Without engine oil, an engine cannot operate properly.
14
0
Share

What type of engine oil should be used for a Polo 1.4?

For a Polo 1.4, if you choose mineral oil, you can select models 5W40 or 10W40; if you opt for semi-synthetic oil, you can use models 5W40 or 5W30; and if you prefer full synthetic oil, you can choose models 0W30, 5W30, or 5W40. The Polo 1.4 has a body length of 4053 mm, a width of 1740 mm, a height of 1449 mm, and a wheelbase of 2564 mm. The Polo 1.4 adopts a new family-style design concept, featuring a flat front grille and horizontal chrome trim for decoration, giving the front a more refined appearance.
6
2
Share

Is the Alphard domestically produced?

Alphard is not domestically produced; it is an imported luxury MPV model. The new Toyota Alphard is a hybrid vehicle. This car features a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. The Alphard offers excellent ride comfort, with a spacious interior and high-end configurations. It is equipped with a 2.5-liter naturally aspirated engine, delivering a maximum power of 86 kW and a maximum torque of 198 Nm. The engine reaches its maximum power at 4700 rpm and its maximum torque between 2800 to 4000 rpm. It incorporates hybrid injection technology and uses an aluminum alloy cylinder head and block.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.