Can the car engine compartment be cleaned?

1 Answers
Lena
07/29/25 6:00pm
Car engine compartments can be cleaned with a high-pressure air gun, but it is not recommended to rinse directly with water, especially with a high-pressure water gun. Although the electronic components inside the engine compartment are waterproofed, prolonged use may cause the waterproof structure to deteriorate due to high temperatures, reducing its waterproof performance. When cleaning the engine compartment, first ensure the engine is turned off and all electrical components are not operating. Cleaning should be done after the engine compartment has cooled down, avoiding cleaning under high-temperature conditions. This prevents damage to the engine and avoids burns from excessive heat. A thorough cleaning of the engine compartment, especially the engine surface, wiring surfaces, and plastic or rubber parts, can help the engine dissipate heat quickly and protect the wiring inside the engine compartment.
Was this review help?
8
2
Share
More Forum Discussions

What is the actual fuel consumption of the Peugeot 308?

The actual fuel consumption of the Peugeot 308 varies slightly depending on the car version, generally around 7-10L per 100 kilometers. Methods to reduce fuel consumption for the Peugeot 308: Avoid bad driving habits such as sudden acceleration, hard braking, and sharp steering; do not use low-quality gasoline, and maintain the car regularly, such as frequently cleaning engine carbon deposits. Reasons for significant differences in the actual fuel consumption of the Peugeot 308: The main reasons for the significant differences in the actual fuel consumption of the Peugeot 308 include variations in the production year of the car, with older versions generally having higher fuel consumption. Additionally, different versions of the car may have slight differences in weight, and individual driving habits also contribute to the variation.
15
3
Share

Can the gear shift knob of the Passat be replaced?

The gear shift knob of the Passat can be replaced. The correct usage of the button on the gear shift should be: After the car is parked, first press the brake to shift the gear lever to N, then engage the handbrake, release the foot brake and turn off the engine, and finally push the gear lever into P. Precautions for using the plus and minus buttons: When using the plus and minus buttons, pay attention to whether you are using the gear shift grip or the paddle shifters. The gear shift grip is usually pushed forward for "+" one gear and pulled backward for "-" one gear. If you are using paddle shifters, there are usually markings.
2
2
Share

What Causes Excessive Dry Friction on a Car's Windshield?

The reason for excessive dry friction on a car's windshield is the poor quality of the wiper blades. There are four maintenance methods for wipers: 1. Dust: On sunny days, use the wipers to remove dust from the windshield surface. When removing dust, always spray windshield washer fluid and avoid dry wiping. 2. Damaged Blades: If there are stubborn or hard contaminants on the glass, clean them manually. These contaminants can easily damage the wiper blades, leading to ineffective wiping and, in severe cases, affecting the wiper motor. 3. Wiper Blades: When lifting the wiper blades during car washing or routine cleaning, hold them by the spine. Gently place them back instead of snapping them into position. 4. Winter Use: In winter, first use an ice scraper to remove ice chips from the windshield to avoid overburdening the wipers. Proper cleaning of the wipers is essential; neglecting this can accelerate wear and tear.
10
2
Share

How many cylinders does the BMW X3 engine have?

The BMW X3 engine is a 4-cylinder. Below is an introduction to the BMW X3 engine and its maintenance. Introduction to the BMW X3 engine: The vehicle uses three engines: a low-power version of the 2.0-liter turbocharged engine, a medium-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. The transmission system is matched with an 8-speed automatic manual transmission, and the xDrive four-wheel-drive system is standard across the entire lineup. BMW X3 engine maintenance: Regularly change the engine oil and oil filter, maintain good crankcase ventilation, periodically clean the fuel system, regularly maintain the radiator, and perform fuel system maintenance and cleaning. The car engine requires regular maintenance. When driving through areas that are particularly humid or have high levels of dust, it is also necessary to inspect and maintain the relevant components of the engine.
1
3
Share

Why is the Peugeot 307 durable?

The durability of the Peugeot 307 is primarily attributed to the high quality of its components and excellent overall performance. Below is a detailed introduction about the Peugeot 307: Overview: The Dongfeng Peugeot 307 largely inherits the common features of the Peugeot series. The overall streamlined design is smooth and harmonious, with the front fenders seamlessly blending into the upper body, the arched roof integrating with the rear triangular windows and spoiler, and the trunk naturally transitioning into the rear spoiler. The exterior design is balanced and symmetrical. Steel Body: The integrated steel body of the Dongfeng Peugeot 307 significantly enhances the vehicle's strength. On one hand, during collisions, specially designed impact-absorbing zones reduce the impact on passengers, improving passenger protection. On the other hand, the integrated body ensures excellent grounding performance, fully guaranteeing driving safety.
10
0
Share

Can a Car Radiator Freeze at -7 Degrees Celsius?

Can a Car Radiator Freeze at -7 Degrees Celsius? A car radiator can freeze at -7 degrees Celsius. Generally, water in the vehicle's radiator starts to freeze when the temperature drops below -4 degrees Celsius. Introduction to Car Radiator: A car radiator typically refers to the heat exchanger. The radiator is part of the car's cooling system. In an engine's water cooling system, the radiator consists of three main parts: the inlet chamber, the outlet chamber, and the radiator core. Installation Methods for Car Radiator: There are three installation methods for car radiators: same-side inlet and outlet, opposite-side inlet and outlet, and bottom inlet and outlet. Regardless of the method, it is essential to minimize the number of pipe fittings. More fittings not only increase costs but also raise potential risks.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.