Can the car continue to drive if it is shaking?

3 Answers
VanessaMarie
07/28/25 10:39am
If the car shaking is relatively noticeable, you can still continue to drive as long as the warning light is not on, but you should drive at a lower speed and go to a repair shop as soon as possible to check the cause of the shaking. If the car shakes particularly violently, makes unusual noises, and the warning light is also on, you should stop immediately and call for assistance. Causes of car shaking: 1. Engine problems such as carbon deposits, misfiring, or knocking; 2. Grooved brake discs; 3. Severely worn or loose clutch plates; 4. Shaking during high-speed driving may be due to wheel imbalance or abnormal tire wear.
Was this review help?
20
5
Share
NadiaMarie
08/11/25 4:10pm
I have experienced my car shaking several times, and each time I stopped to check because it concerns driving safety. Vehicle shaking could be a precursor to unbalanced tires or a flat tire, or it might be due to issues with the engine's ignition system, such as spark plugs. If the shaking is severe while driving at high speed, the wheels might come off, leading to a serious accident. I remember the last time I felt the steering wheel shaking violently on the highway, I immediately slowed down and pulled over. Upon checking, I found that one of the tires had low pressure—fortunately, I handled it in time and avoided an accident. My advice is, don't hesitate when you feel shaking: slow down, pull over to a safe area, check the tires, listen for any abnormal engine sounds, and call a tow truck if necessary. Safety first is always the right approach.
Was this review help?
10
1
Share
Expand All
CoraAnn
09/28/25 4:50am
When the car starts shaking, I have to think about whether I should keep driving, which is quite annoying. If it's a slight vibration, it might be due to uneven road surfaces or worn-out tires, and you can temporarily drive slowly to the repair shop, but keep it at a low speed. If the steering wheel becomes unstable, it's likely an issue with the drivetrain or suspension, and you shouldn't push it, or the car might break down halfway. I have an old trick: try turning off the AC and driving at low speed to observe. If it still shakes, thoroughly check the tires and brake discs. Developing good habits, like regular tire maintenance, can avoid these troubles. If the shaking gets severe, don't force it—saving a bit on fuel might lead to hefty repair bills.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is the remote start tutorial for the Land Rover Range Rover?

First, you need to download the official app and register. After passing the manufacturer's verification, you can follow the function keys on the app to perform a remote start. Aim the key at the vehicle and press the lock button on the key. Within 5 seconds, hold the remote start button on the key for at least 4 seconds, or until the vehicle's turn signals flash. The parking lights will illuminate, and the doors will lock. After entering the vehicle during a remote start session, press the brake pedal and turn the ignition switch to the on position to drive the vehicle.
9
5
Share

How to Adjust the Dome Light Not Turning On When Opening the Door in a Land Rover?

If the interior light of a Land Rover Range Rover does not turn on when opening the door, it means the door control function has been turned off. You need to press the door control switch of the interior light to activate it. Open the driver's side door of the Land Rover Range Rover and step on the brake pedal. Press the one-touch start button of the Land Rover Range Rover to start the engine. The dashboard will light up, indicating that the engine has been started. There is a contact switch on the door. Press the door control switch of the Land Rover Range Rover to activate the interior light door control mode.
3
2
Share

How to Maintain a Land Rover Evoque?

Press the one-touch start ignition, use the function keys on the right side of the steering wheel, which are the 4 directional keys and 1 OK key, to find the vehicle information option on the dashboard. Locate the "Recent Alerts" option and press "OK" to enter. Simultaneously hold down the "Down" button on the right side of the steering wheel and the "i" button at the end of the turn signal lever, maintaining this action for about 10 seconds to complete the reset. Finally, restart the vehicle and check if the reset was successful. If not, repeat the operation.
7
3
Share

How to Engage Reverse Gear in a Kia Manual Transmission?

Locate the R gear on the Kia gear shift lever, which is designated for reverse. Engaging this gear allows the vehicle to move backward. Press down on the brake pedal of the Kia K2, leaving the accelerator pedal untouched for now. Press the Kia K2's one-touch start button to illuminate the dashboard and start the vehicle. Shift the Kia K2's automatic gear lever to the R position to enter reverse mode. Apply the brakes if there are obstacles, and gently press the accelerator if you need to increase speed. Once reversing is complete, depress the clutch, disengage the reverse gear, and release the clutch.
19
5
Share

How to Solve the Problem of Scooter Motor Spinning Freely?

When pressing the electric start button of the scooter, you can only hear the motor spinning freely without starting the vehicle. This may be caused by damage to the motor reduction gear. First, remove the transmission side cover. Check the reduction gear and find that the scooter motor cannot reset, confirming that the motor spinning freely is due to damage to the motor reduction gear. It is found that the reduction gear sleeve is severely worn and may no longer be usable. It is necessary to find the sleeve, reduction gear, and pressure cover according to specifications. Replace the sleeve, reduction gear, and pressure cover, then reassemble the vehicle. This will effectively solve the problem of the scooter motor spinning freely.
6
0
Share

What to Use to Clean Tar on a Car?

If there is rust, remove the rust first. Direct polishing can remove the rust. Choose a good anti-rust and waterproof coating to repair the rusted holes. When performing anti-rust work, it is best to use the same type of paint to prevent different paints from reacting with each other. After repairing the rusted holes on the chassis, apply a plastic sealant to the bottom of the car to prevent rust. To maintain the chassis in winter, perform a thorough chassis cleaning and anti-rust treatment. First, clean the chassis thoroughly.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.