Can the Car Be Locked If the Engine Is Still Running?

1 Answers
OJaxson
07/25/25 7:29am
When the vehicle's engine is still running, the doors cannot be locked. Below is relevant information about the engine shutting off: 1. Common reasons for a car to automatically shut off: (1) Vacuum leakage in the intake pipe; (2) Unstable idle speed caused by improper idle adjustment, dirty throttle body, or poor idle control system performance; (3) Unstable fuel pressure, such as excessive wear or poor contact of the electric fuel pump brush, or clogged fuel pump filter; (4) Blocked or leaking EGR valve. 2. Measures to prevent forgetting to turn off the engine when exiting the vehicle: (1) Check the tachometer and display screen. Before exiting, see if the display screen has turned off and gone black. Also, check if the tachometer reads zero. (2) Turn on the daytime running lights. In the light settings, enable the daytime running lights. This method is quite effective. After locking the doors, check if the daytime running lights are off, indicating that the engine is definitely shut off.
Was this review help?
4
2
Share
More Forum Discussions

What to Do If You React Slowly in Subject 3?

Be sure to stay relaxed and natural. The purpose of this is to accurately control the steering angle. Additionally, if you encounter unusual traffic conditions ahead, do not panic or become flustered, as this can easily lead to unconsciously gripping the steering wheel too tightly, which may cause the vehicle to veer off course. More relevant information is as follows: 1. Keep your hands steady while practicing: Your hands are not only responsible for controlling the steering wheel but also for many other operations, such as pulling the handbrake and shifting gears. When performing hand movements, ensure they are steady. Avoid gripping the steering wheel too tightly, as this can easily lead to veering. The common steering wheel grip is to place your hands at the 3 o'clock and 9 o'clock positions, staying relaxed and natural. This helps in accurately controlling the turning angle. Moreover, if you encounter unusual traffic conditions ahead, do not panic or become flustered, as this can easily lead to unconsciously gripping the steering wheel too tightly, which may cause the vehicle to veer off course. 2. Keep your feet flexible: Clearly remember the positions of the clutch, brake, and accelerator pedals. Some students often confuse the accelerator and brake pedals, mistakenly pressing the accelerator instead of the brake. When not accelerating, place your right foot on the brake pedal. Ensure your foot posture is correct. Use your heel as a pivot point, with the ball of your foot pressing the pedal. After pressing the pedal all the way down, make sure your leg is bent, allowing for smooth and easy pedal operation. Under the guidance of your instructor, familiarize yourself with the pedal sensitivity of different vehicles, especially the clutch. Remember, the clutch in the test vehicle may differ from that in the practice vehicle. Learn to recognize the vehicle's state when the clutch is in the semi-engaged position. In daily practice, besides coordinating your hands and feet, pay attention to observing more to master various driving skills flexibly.
13
5
Share

What are the best tires for the Touareg?

Here is the relevant information about the best tires for the Touareg: 1. If you frequently drive in urban areas, it is recommended to use the Pirelli Scorpion Verde All Seasons tires. These tires feature an optimized appearance design and processing, along with innovative materials, which significantly reduce rolling resistance and noticeably decrease tire noise. This not only saves fuel but also provides a comfortable driving experience. The latest developed rubber material and silica compound tread ensure more even wear. The dense tread patterns combined with wide continuous longitudinal grooves effectively drain water, improving lateral stability and traction for safer driving. 2. If you prioritize comfort, the Pirelli Scorpion Verde is recommended. This tire is an eco-friendly option suitable for mixed and urban road conditions for mid-range horsepower SUVs. The four eco-friendly symbols on the tire sidewall highlight its respect for the environment. The innovative carcass structure and the use of high-tech compound materials make it lighter, with lower rolling resistance, better fuel efficiency, and quieter operation. The wide tread, unique pattern design, and new rubber compound provide superior grip. 3. For those who frequently go off-road, the Michelin Latitude Tour HP is recommended. This tire ensures high mileage even under tough terrain conditions, such as heavy vehicle loads, rapid braking, climbing, and cornering. It incorporates Michelin's engineering machinery tire formula technology, with tread rubber that excels in resisting damage from gravel. Additionally, designers have added fine grooves within the tread blocks to use their sharp edges to break the water film on the tire's contact surface, allowing the rubber to directly grip the ground. The designers also utilized StabiliGrip technology, which provides self-locking functionality for the fine grooves, thus increasing the rigidity of the tread blocks, reducing tread block movement, and shortening braking distances for more precise driving.
16
4
Share

Why Doesn't Daihatsu Enter the Chinese Market?

Daihatsu's models have not gained recognition in the Chinese market, resulting in dismal sales performance and significant challenges in China. Although it is a subsidiary of Toyota, its brand awareness in China is even lower than that of domestic car brands. Here is a related introduction to why Daihatsu does not enter the Chinese market: 1. Introduction to Daihatsu: "Daihatsu" is the abbreviation for "Daihatsu Motor Co., Ltd." Founded in 1907 in Osaka, Japan, Daihatsu Motor Co., Ltd. has been committed to the development of the small car sector for over a century. It possesses advanced technologies in engines, space utilization, vehicle safety, and environmental protection, making it a globally leading small car manufacturer, often referred to as the "small car expert." As a member of the Toyota Group, Daihatsu specializes in producing small cars with low fuel consumption, resource efficiency, and compact space. It aims to become a "truly international enterprise" and actively promotes globalization. 2. Purpose: The joint venture between Japan's Daihatsu and FAW primarily focuses on small cars, with technical levels similar to Suzuki. However, due to its lack of brand recognition, its market performance has been mediocre. The purpose of introducing Daihatsu cars was mainly for civilian use. After adding seats, these vehicles could serve both as delivery vans and passenger cars, providing an alternative to sedans for urban and rural residents at the time.
1
1
Share

How many seconds does the Volkswagen CC take to accelerate from 0 to 100 km/h?

According to official data, the Volkswagen CC has a total of 8 models, all with a 2.0L displacement, and the 0-100 km/h acceleration time ranges from 7.7 to 8.4 seconds. Factors affecting the vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, indicates how much force is available. The greater the torque, the more force is applied to propel the vehicle, naturally resulting in faster acceleration. For comparison, the LaCrosse in the same class has a maximum torque of 250 Nm and a 0-100 km/h acceleration time of 9.6 seconds. The Volkswagen CC has two torque types: 350 Nm and 320 Nm, with a maximum 0-100 km/h acceleration time of 8.4 seconds. Transmission efficiency: The transmission is the medium for transferring power, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Volkswagen CC is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For comparison, the LaCrosse in the same class has a power-to-weight ratio of 111 Hp/T and a 0-100 km/h acceleration time of 9.6 seconds. The Volkswagen CC has a power-to-weight ratio of 134 Hp/T, with a maximum 0-100 km/h acceleration time of 8.4 seconds.
2
5
Share

Where is the Mazda 6 rearview mirror heating switch located?

The Mazda 6 rearview mirror heating switch is located in the center console area, next to the front windshield defogger switch. The icon for the rear window defogger switch is a rectangle with three upward wavy lines inside. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog, eliminating the need for the driver to manually wipe the mirrors frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric mirror adjustment control—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually dissipates, effectively removing frost. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume significant power. Ensure the car is running when using this function to avoid draining the battery, which could prevent the car from starting. Other methods to defog rearview mirrors include: Opening windows slightly to allow air convection between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.
11
1
Share

What are the consequences of running a red light?

According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal regulations results in a penalty of 6 points. Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to Article 26 of the 'Road Traffic Safety Law': Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Article 44 states that motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. When arrow lights are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted; however, if the right-turn arrow is red, right turns are prohibited, and violations will be penalized as running a red light. Brake promptly: When the red light is on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, electronic cameras will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light is flashing, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection with sufficient speed, it may proceed to avoid running a red light due to delayed braking. If the speed is low and the vehicle is far from the intersection, brake immediately to stop and avoid running the red light. Article 38 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China' states the following for motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If a violation is captured by surveillance cameras due to yielding, manual review will not record the act as running a red light. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, and even electronic police cannot clearly see the traffic lights. The evidence photos may be blurry, and accidental violations will not be penalized. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, quickly exhausting the 12-point limit. After delivering the patient, the driver can present hospital or patient-provided proof to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.