Can the car be exposed to rain on the same day after color change film application?

What is the difference between Coaster and K-Car?

The difference between Coaster and K-Car lies in their powertrains: the imported Coaster is equipped with a four-cylinder engine, with a maximum power output of 113kw; the domestic K-Car is equipped with a 4.0-liter V6 engine, with a maximum power output of 171kw. The Coaster has both domestic and imported versions, with most people referring to the domestic version as K-Car and the imported version as Coaster. The imported version differs in appearance and interior design. In terms of configuration, the domestic version is generally higher, while the imported version has relatively lower configurations without modifications. The Coaster is synonymous with 'luxury buses' produced by Toyota, offering precise handling while retaining strong power and comprehensive safety and comfort.

16

0

Share

Does Mirror Crossing the Line in Reverse Parking in Subject 2 Result in Failure?

Generally, crossing the line with the rearview mirror during reverse parking in Subject 2 does not result in penalty, depending on the specific markings at each test site. According to the "Motor Vehicle Driver Training and Examination Syllabus," as long as the vehicle body does not exceed the ground markings during reverse parking, no points are deducted. Since rearview mirrors are protruding, whether they are considered part of the vehicle body depends on the recognition standards of each local test site. Failing the test occurs if the vehicle body crosses the line, fails to enter the parking space, stops midway, does not follow the prescribed route, violates the sequence, or exceeds the time limit, all of which result in a 100-point deduction. Subject 2 is scored out of 100 points, with evaluation criteria set for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The rules for the Subject 2 motor vehicle driver's license test state that stopping midway, rolling back, or not following voice prompts result in failure. Additionally, crossing the line with wheels or the vehicle body also leads to failure. Many learners encounter line-crossing issues during Subject 2 training, with "crossing the line" being the most common reason for failure. The main cause of wheel line-crossing is the learner's failure to master the correct timing for steering. Besides missing the steering timing, another reason could be the steering speed not keeping up with the vehicle speed. Subject 2 Deduction Standards: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using turn signals (including starting, lane changing, overtaking, turning, and parking); using turn signals for less than three seconds (note: this is easily overlooked!); forgetting to turn off turn signals or using them incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the prescribed route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Failing to enter the parking space: 100-point deduction. Before reversing, not having both front wheels cross the control line: 100-point deduction. Exceeding the 210-second time limit: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Slope Parking and Starting: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm forward or backward: 100-point deduction. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: 10-point deduction. After stopping, exceeding the 30-second start time: 100-point deduction. Wheels crossing the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After stopping, if the vehicle body is more than 50 cm from the road edge line: 100-point deduction. Not tightening the parking brake after stopping: 10-point deduction per occurrence. After stopping, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line: 10-point deduction per occurrence. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction per occurrence. Parallel Parking: After parking, if the vehicle body crosses the line: 100-point deduction. Not using or incorrectly using turn signals when entering the parking space: 10-point deduction. Exceeding the 90-second time limit: 100-point deduction. Touching the parking space edge line while driving: 10-point deduction per occurrence. Wheels touching the lane edge line while driving: 10-point deduction per occurrence. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. 90-Degree Turn: Wheels crossing the road edge line: 100-point deduction. Not using or incorrectly using turn signals during the turn, or not turning them off after the turn: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction per occurrence. Curve Driving: Wheels crossing the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not driving in second gear or higher: 5-point deduction.

2

Share

Do vehicles need annual inspections after six years?

After six years, vehicles require annual inspections, which is part of the standard annual inspection process. Below are detailed explanations: 1. Explanation one: Passenger vehicles for commercial use must be inspected once a year within the first five years, and every six months thereafter. 2. Explanation two: Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first ten years, and every six months thereafter. 3. Explanation three: Small and mini non-commercial passenger vehicles must be inspected once every two years within the first six years, once a year thereafter, and every six months after fifteen years.

1

3

Share

Which One is the Clutch in a Car?

The leftmost pedal is the clutch. More details about the car clutch are as follows: 1. Introduction: The output shaft of the clutch is the input shaft of the gearbox. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the gearbox, thereby cutting off or transmitting the power from the engine to the transmission. 2. Principle: The driving part and the driven part of the clutch transmit torque through friction between contact surfaces, or use liquid as a transmission medium (hydraulic coupler), or magnetic transmission (electromagnetic clutch), allowing temporary separation and gradual engagement, while permitting mutual rotation during the transmission process.

1

2

Share

Should the Lavida 1.4T use 92 or 95 octane gasoline?

Lavida 1.4T should use 92 octane gasoline, as 92 octane is suitable for gasoline engines with a compression ratio between 8.6 and 9.9. Fuel grades typically include 90, 92, 93, 95, etc. The higher the grade, the better the anti-knock performance. Since the anti-knock component is isooctane, a higher grade indicates a higher isooctane content in the gasoline, naturally resulting in stronger anti-knock properties. The Lavida is a compact sedan under the Volkswagen brand, with dimensions of 4670 mm in length, 1806 mm in width, and 1474 mm in height, and a wheelbase of 2688 mm. The Lavida is equipped with three engine options: a 1.2L turbocharged engine, a 1.4L turbocharged engine, and a 1.5L naturally aspirated engine.

17

3

Share

What level of vehicle does the Cruze belong to?

The Cruze belongs to the compact car category, with a length of 4630mm, a width of 1798mm, a height of 1485mm, and a wheelbase of 2640mm. This vehicle is equipped with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The Cruze is powered by two engines: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. The 1.0-liter turbocharged engine delivers a maximum power of 92kw and a maximum torque of 170nm, with the maximum power achieved at 5600 rpm and the maximum torque available between 2000 to 4000 rpm. The 1.3-liter turbocharged engine produces a maximum power of 120kw and a maximum torque of 230nm, with the maximum power reached at 5500 rpm and the maximum torque available between 1800 to 4400 rpm.

17

2

Share

Can the car be exposed to rain on the same day after color change film application?

What is the difference between Coaster and K-Car?

Does Mirror Crossing the Line in Reverse Parking in Subject 2 Result in Failure?

Do vehicles need annual inspections after six years?

Which One is the Clutch in a Car?

Should the Lavida 1.4T use 92 or 95 octane gasoline?

What level of vehicle does the Cruze belong to?

Is the Levin a product of FAW Toyota or GAC Toyota?

What Are the Consequences of Forgetting to Engage the Handbrake?

What does the MAX A/C button in a car mean?

What Causes Loud Noise When Driving at High Speeds?