Can the camera in Shenzhen capture rear seat passengers not wearing seat belts?

3 Answers
VonAlexander
07/24/25 3:11pm
Cameras cannot capture it. Here is the relevant introduction: Safety function: By reducing the secondary impact force that poses an internal collision risk, it lowers the possibility of death or serious injury in traffic collisions. It ensures that occupants are correctly positioned to maximize the effectiveness of airbags and prevents occupants from being ejected from the vehicle or the vehicle from rolling over during a collision. Hazards: When a vehicle is involved in an accident or emergency braking, a huge inertial force is generated. Depending on the driving speed and the severity of the collision, this inertial force varies. The inertial force causes the driver and passengers to collide with objects inside the vehicle, such as the steering wheel, windshield, seat backs, and doors, which can easily cause severe injuries to the occupants, or even eject them from their seats or out of the vehicle.
Was this review help?
1
3
Share
GiselleDella
08/10/25 7:17am
Having driven in Shenzhen for many years, I've seen quite a few friends get fined after being caught by cameras for not wearing seat belts in the back seats. Shenzhen's traffic monitoring system is quite advanced now, with many high-definition cameras, especially on main roads and at tunnel entrances. The cameras are set at wide angles, sometimes capturing both front and back seats inside the car. This isn't alarmist talk—I've read reports that the traffic management department specifically upgraded their equipment to catch seat belt violations. Think about it: when it's hot in Shenzhen and car windows are open, the cameras can easily see if people in the back are wearing seat belts. Last year, I personally experienced this near Fumin Avenue when traffic police later sent a ticket saying a back-seat passenger wasn't buckled up. I think everyone should make it a habit—no matter where you sit, seat belts are life-saving. In case of an accident, they can reduce injuries. Remember, safety first. Don't cut corners to save time or money. A fine of a few hundred yuan is a small matter, but there are no second chances with human lives.
Was this review help?
18
0
Share
Expand All
AveryMarie
09/25/25 7:18am
As a tech enthusiast, I have some knowledge about Shenzhen's camera systems. They utilize AI high-definition technology capable of detecting in-vehicle movements, including seatbelt fastening status. Whether rear seats can be captured depends on the vehicle model and camera positioning - for instance, SUVs with spacious interiors and optimal angles allow HD lenses to clearly monitor rear seat activity. I've seen real-world test videos on forums where cameras at an intersection in Nanshan District successfully captured rear passenger violations with resolution sharp enough to discern details. However, this isn't absolute; overly dark window tinting or poor weather conditions may cause blurring. Technically, these cameras employ image processing algorithms to detect seatbelts, with backend systems automatically filtering and reporting violations. My advice: don't take chances. Shenzhen enforces strict traffic laws - my research shows rear seatbelt violations incur fines exceeding 200 RMB. Taking that extra second to buckle up ensures peace of mind.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What is the method to reset the maintenance light on the JAC Refine S3?

The method to reset the maintenance light on the JAC Refine S3 is: turn off the ignition switch, press and hold the adjustment lever at the lower right of the instrument panel, and then turn on the ignition switch to reset. The functions of the maintenance light are: 1. Record the mileage of important components; 2. Remind the owner to perform maintenance. The JAC Refine S3 is a compact SUV with body dimensions of: length 4345mm, width 1765mm, height 1640mm, wheelbase 2560mm, and a fuel tank capacity of 45L. It is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW and a maximum power speed of 6000rpm.
19
1
Share

What colors are available for the Geometry A car?

Geometry A car comes in the following colors: 0° White, 11° Silver, 18° Gold, 26° Blue, and 100° Red. The Geometry A is a pure electric compact car with the following body dimensions: length 4736mm, width 1804mm, height 1503mm, wheelbase 2700mm, and a trunk capacity of 430L. It uses 205/60R16 tires. The car is equipped with a front-mounted ternary lithium battery, with a total motor power of 120kW and a total motor torque of 250Nm. It is paired with a fixed gear ratio transmission and features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

How to Set One-Touch Up/Down for the Avalon?

The method to set one-touch up/down for the Avalon is: 1. Start the vehicle, press down or lift the button to the first position, and release when reaching the desired position; 2. Press or lift the button firmly to the second position for automatic rising or descending. The Avalon is a mid-size sedan with body dimensions of length 4975mm, width 1850mm, height 1450mm, a wheelbase of 2870mm, and a fuel tank capacity of 60 liters. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 154kW at 6600rpm and a maximum torque of 250Nm.
2
5
Share

How to Replace Brake Pads with an Electronic Parking Brake?

Electronic parking brake replacement of brake pads method is: 1. Use a jack to lift the front part of the car; 2. Use tools to remove the tire; 3. Unscrew the caliper screws, remove the damaged brake pads and replace them. The electronic parking brake is a technology that achieves parking braking through electronic control. The working principle of the electronic parking brake is: 1. Parking is achieved through the friction clamping between the brake shoe and the brake hub or between the friction plate and the brake disc; 2. The control method replaces the original manual operation and mechanical linkage with electronic buttons and motors. The full name of this system is the electronically controlled mechanical parking brake system.
19
3
Share

Do Automatic Headlights Need to Be Turned Off After the Engine Is Off?

Automatic headlights do not need to be turned off after the engine is off. The method to activate automatic headlights is: adjust the combination switch of the car lights to the auto position. The function of automatic headlights is: when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. The working principle of automatic headlights is: the photosensitive sensor forms a voltage signal based on changes in external light, which is fed back to the automatic headlight control module. After data analysis, it determines whether the lights should be turned on. The maintenance methods for automatic headlights are: 1. Regularly check the lamp cover to avoid water droplets; 2. Prevent impact from foreign objects.
9
5
Share

How to Adjust the Rearview Mirror of the Tiguan?

The method to adjust the rearview mirror of the Tiguan is: Press the circular button next to the door corresponding to the rearview mirror, then adjust the mirror up, down, left, or right as needed. The functions of the rearview mirror are: 1. To prevent traffic safety accidents and ensure personal safety; 2. To expand the driver's field of vision. The Tiguan is a compact SUV with the following dimensions: length 4506mm, width 1809mm, height 1685mm, wheelbase 2684mm, and a fuel tank capacity of 63 liters. It is equipped with a 1.8T turbocharged engine, with a maximum power of 118kW and a maximum power speed range of 4500 to 6200 rpm.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.