···
Log in / Register

Can the BYD Qin be Driven When the Power System is Being Checked?

4 Answers
VonDawson
07/29/25 9:55pm
BYD Qin cannot be driven when the power system is being checked. Here is an introduction to related content about BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a scale of more than 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Starting as a battery manufacturer, BYD was essentially an 'outsider' when it came to making cars. It was through the acquisition of Qinchuan Auto and the use of the resounding name of 'independent intellectual property rights' that BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to the development path of independent research, independent production, and independent branding, aiming to create truly affordable and high-quality vehicles for the people. The product design not only incorporates advanced concepts from international trends but also aligns with the aesthetic values of Chinese culture.
Was this review help?
6
3
Share
AlinaLee
08/15/25 9:38pm
As a BYD Qin Hybrid owner, I’m speaking from personal experience: when the dashboard shows a "Check Powertrain" warning, never force the car to keep running! Last month, I encountered this issue—after the warning appeared, I tried driving for a few minutes, but the car started shaking noticeably and almost broke down mid-journey. Powertrain faults include battery management or motor issues, and continuing to drive can worsen the damage, leading to higher repair costs. The best action is to safely pull over, turn off the engine, check for obvious abnormalities like unusual noises or overheating, and immediately contact a 4S shop or wait for a tow truck. Just in case, I always keep an OBD diagnostic tool handy, but average drivers shouldn’t tamper with core components. Addressing the issue promptly avoids accident risks—safety always comes first.
Was this review help?
8
4
Share
Expand All
HavenDella
10/17/25 6:33am
Honestly, my heart was pounding when I first saw the "Check Powertrain" warning on my BYD Qin. As a young driver with limited experience, I looked it up online and found it's no small issue – powertrain failures could be related to battery overheating, wiring shorts, or software bugs, which may cause sudden stalling or loss of control. Before test driving, it's best to check the owner's manual for emergency handling tips, but never gamble by continuing to drive. My advice: pull over safely, try restarting to see if the warning clears. If it persists, call for roadside assistance immediately. This saves time, prevents further damage, and most importantly, doesn't gamble with anyone's safety.
Was this review help?
6
2
Share
Expand All
DelCecilia
11/30/25 7:17am
As a veteran driver with decades of experience, I believe the BYD Qin's powertrain warning should never be ignored. The hybrid system's complex architecture means such alerts often indicate critical component failures, like malfunctioning electric drive systems or control units. Continuing to drive risks complete breakdown. My approach is to pull over immediately for thorough inspection, activating hazard lights if awaiting assistance becomes necessary. This isn't procrastination - early intervention reduces repair costs. When it comes to safety, excessive caution is always justified.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Can You Still Drive When the Oil Life is 0?

When the oil life reaches 0, it is not recommended to continue driving. Here is some extended information about oil life: 1. The vehicle's computer alerts you about oil life based on preset mileage. 2. If the oil life displays as 0, check whether it is due to a data error caused by not resetting after an oil change or prolonged disuse of the oil. 3. Engine oil has a shelf life and cannot be used indefinitely. The shelf life of oil depends on its condition. Unopened engine oil can last up to five years; leftover oil after a car service, being opened, has a shortened shelf life of about one year; oil already poured into the engine has the shortest shelf life, approximately six months. 4. While checking the car's oil, you can use an oil inspection filter paper to test if the oil has deteriorated. By dripping oil onto the filter paper, three important ring-shaped areas can be observed: the deposit ring, the diffusion ring, and the outer oil ring, which indicate the oil's contamination level, the dispersing ability of additives against contaminants, and the oil's oxidation level.
14
1
Share

What are the causes of brake noise after vehicle startup?

Vehicle startup after the brake noise causes are: 1, too slow to release the brake caused; 2, the new replacement of the brake pads running-in is not in place; 3, sand particles into the middle of the brake pads and brake discs; 4, the brake disc fixing screws are lost or damaged; 5, the brake system failure. The brake maintenance methods are: 1, high temperature protection, to prevent the brake system corrosion, to prevent the brake pads due to high temperature surface bite, to eliminate the brake pads scream; 2, regular replacement of brake oil; 3, clean the brake discs, brake drums and any parts of the oil stains, dirt and friction dust, to maintain the brake disc heat dissipation good; 4, regular inspection of the thickness of the brake pads or brake shoes.
13
0
Share

What Causes the Brake Pedal to Be Hard to Press and the Car Unable to Start?

Here are the reasons why the brake pedal is hard to press and the car cannot start: 1. Vacuum booster pump leakage: If the car's vacuum booster pump leaks or malfunctions, the force required to press the brake pedal increases because the brake booster is not functioning properly. If it fails, the brake loses its power assistance, making it difficult to press. 2. Normal phenomenon: The inability to press the brake pedal after the engine is turned off is related to the brake booster pump. The brake booster pump only continuously generates vacuum when the engine is running. When the engine is off, it relies on the remaining vacuum assistance, but this will restore once the engine starts, and it is not a malfunction. Additional info: In driving, to prevent unexpected situations like sudden movement or rolling when starting the car, automatic transmission models are designed to require pressing the brake pedal to start. If the brake pedal is not pressed, the car will not start successfully. Moreover, the gear must be in P (Park) or N (Neutral) when starting an automatic transmission car. If started in N without the handbrake engaged, the car may roll. Therefore, the "press brake to start" design is entirely for safety considerations.
13
2
Share

Is Brake Maintenance Necessary?

Brake maintenance is necessary. Only by timely servicing the components of the brake system and cleaning and lubricating the safety parts can the accuracy and safety of the brakes be ensured. Below are the phenomena that may occur if the brake system is not maintained for a long time: 1. Abnormal noise: The dust from normal wear of the brake pads accumulates near the brake calipers, and if not cleaned for a long time, it can cause abnormal noise; the sound-damping and vibration-damping plates of the brake pads, if not cleaned and lubricated for a long time, can also cause brake noise. 2. Abnormal wear: When driving on gravel roads, some particles may splash between the brake pads and brake discs, causing noise or abnormal wear. 3. Brake deviation: If the dust cover of the sliding shaft of the caliper is damaged, driving through water or mud puddles can cause the caliper shaft to rust and seize, the caliper to not return to position, reduced braking force, and brake deviation.
14
1
Share

What engine does the Peugeot 5008 have?

The Peugeot 5008 is equipped with 1.6T and 1.8T turbocharged engines. A turbocharged engine refers to an engine fitted with a turbocharger. Taking the 2019 Peugeot 5008 as an example, it is a mid-size SUV with the following dimensions: length 4670mm, width 1855mm, height 1650mm, wheelbase 2840mm, and curb weight 1541kg. The 2019 Peugeot 5008 features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a 1.6T turbocharged engine producing a maximum horsepower of 170PS, maximum power of 125kW, and maximum torque of 250Nm.
7
5
Share

What engine does the Buick Regal use?

Buick Regal uses a 1.5T turbocharged engine and a 2.0T turbocharged engine. A turbocharged engine refers to an engine equipped with a turbocharger. Taking the 2020 Buick Regal as an example, it belongs to the mid-size car category with a length of 4904mm, width of 1863mm, height of 1461mm, wheelbase of 2829mm, fuel tank capacity of 55L, and trunk capacity of 441L. The 2020 Buick Regal is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, maximum torque of 250Nm, and is paired with a 9-speed automatic manual transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.