Can the Broken Rear Window Defroster Wire Be Repaired?

1 Answers
LaElliott
07/29/25 10:57pm
If the defroster wire in the car's rear windshield is broken, it cannot be repaired; the entire rear windshield must be replaced. However, if it's just a blown fuse, replacing the fuse will suffice. The rear windshield heating system uses resistance heating wires, which are particularly useful during rainy or snowy weather. Function of the defroster wire: The horizontal lines on the rear windshield are the defroster wires. Their primary function is to defrost and demist the glass. During rainy or snowy conditions, activating the defrost/demist button electrifies the heating wires, raising the glass temperature. This causes frost or fog on the glass to melt into water droplets or evaporate as mist, effectively removing frost and fog. This ensures clear visibility for the driver, enhancing safety during reversing and driving. Usage duration of defroster wire: It's important to note that the rear windshield defroster should not be used for extended periods. Each use should be limited to approximately 15 minutes. While the defroster function effectively removes frost and fog, prolonged or uneven heating due to faulty wires can not only reduce its effectiveness but also pose safety risks, potentially leading to windshield cracking in severe cases.
Was this review help?
4
1
Share
More Forum Discussions

What is the New Technology for Automotive Sheet Metal Repair?

Here is the relevant introduction to the new technology for automotive sheet metal repair: 1. Content: Automotive sheet metal data restoration includes analysis of vehicle body damage, measurement of the vehicle body, shaping of automotive sheet metal, stretching and correction, etc. 2. Definition: Automotive sheet metal is a production and processing technique in vehicle repair, also known as cold working. It involves handling the procedure when the vehicle body shape is damaged or deformed. The repair of collision-damaged vehicles is not simply about hammering the sheet metal, nor is the repair quality solely judged by visual inspection of the vehicle's appearance or gaps. It requires restoring the three-dimensional dimensional data of key points on the vehicle body to the factory state.
18
3
Share

What is the top speed of the Honda Haoying?

The Honda Haoying has a top speed of 193 km/h. Here are the detailed specifications: 1. Exterior: The Haoying inherits Honda's latest design elements, blending fashion and charm. The front features integrated LED high/low beam headlights with a sharp front grille, complemented by a rounded and full front-end design, giving the Haoying a dynamic and sporty appearance. The recessed headlight design emphasizes a sharp and lively style. 2. Powertrain: Equipped with a 1.5T engine producing 193 horsepower, the Haoying delivers excellent performance. During acceleration, it offers smooth and steady power delivery with responsive handling and strong overtaking capability. The transmission is a CVT, known for its fuel efficiency, with a fuel consumption of 6.8 liters per 100 km for a curb weight of 1,598 kg, and 6.4 liters per 100 km for other curb weights.
5
3
Share

What is the front panel in the car called

The front panel in the car is called the center console. It serves as the carrier for installing the instrument panel, air conditioning and audio panels, as well as storage compartments, airbags and other devices. It also concentrates most of the control buttons apart from driving. The leftmost part in front of the steering wheel is the instrument panel, which can display a lot of useful information. For example, the basic car odometer, speedometer, tachometer, and the vehicle dashboard indicators including daily indicator lights, warning lights and fault indicator lights. The daily indicator lights are the most common ones we encounter regularly. Common ones include high beam, low beam, seatbelt unfastened indicator, turn signal, parking brake indicator. The function of these indicator lights is to remind us of the switching of various vehicle functions. Warning lights are used to notify the driver of the vehicle's condition. They are generally used to indicate the storage level of each fluid. When the fluid level is critically low, the vehicle will display warning lights on the instrument panel, usually in orange or red. Common ones include fuel indicator, engine oil indicator and coolant indicator. These warning lights can only be eliminated by timely replenishing the corresponding fluid. The function of the fault indicator is to notify the driver of the current fault location of the vehicle. When seeing this indicator light, we cannot take it lightly. We should promptly go to the repair shop to check the vehicle. Common fault indicators include engine fault light, battery fault light and airbag fault light. In the middle front of the car, there is a multimedia control area, below which is an air conditioning control area. The front passenger side usually has a glove box for storing items. Generally, there is a large screen in the multimedia control area that can be used for navigation, listening to music, playing videos, etc. The lower control area can control temperature adjustment, air volume adjustment, and switching between internal and external circulation. The design of the center console is equally important. Designers need to consider factors such as practicality, aesthetics, and operability when designing the center console. Because there are many functional buttons on the center console that need to be operated while driving, a good design can allow the driver to operate without affecting driving safety, while a poor design will reduce the driver's operational convenience and may even affect driving safety.
19
1
Share

What are the methods to prevent loosening of screws on the transmission?

Methods to prevent loosening of screws on the transmission include: 1. Friction-based anti-loosening: spring washer anti-loosening, double nut anti-loosening, self-locking nut anti-loosening, elastic ring nut anti-loosening; 2. Mechanical anti-loosening: slotted nut and cotter pin anti-loosening, round nut and lock washer, lock washer, wire locking anti-loosening; 3. Permanent anti-loosening: peening anti-loosening, adhesive anti-loosening. The transmission is a device that changes the speed ratio and direction of motion, located between the clutch and the central drive, used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions.
8
0
Share

What do the PWR and SNOW indicators mean in the Reiz?

The SNOW indicator in the Reiz refers to the snow mode, while the PWR indicator represents the electronic mode, also known as the sport mode. Below is some relevant information about the Reiz: 1. Exterior: The Reiz's body surface is glossy, vibrant, and full, breaking through the traditional concept of vehicles in its class. It adopts the best body proportions and perfect structure for an FR sedan. It first uses a long wheelbase while shortening the front and rear overhangs. The low and thick engine hood, combined with the front and rear bumper designs, creates a low center of gravity vehicle structure, further emphasizing the styling philosophy of the exterior. 2. Side Profile: The lines are smooth and elegant, with well-proportioned contours. The proportions of each part are very harmonious. The front design looks very sporty, with a prominent front lip and a shield-shaped raised engine hood that exudes a strong sporty feel. The rear design also echoes the front.
9
1
Share

Where is the Yu license plate from?

Currently, there is no Yu license plate. The first character of a license plate is a Chinese character, representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of provinces, municipalities directly under the central government, or autonomous regions. The second character is an English letter, representing the prefecture-level administrative region where the vehicle is registered, generally the letter code for prefecture-level cities, regions, autonomous prefectures, or leagues. License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle, serving as the numbering and information registration for each vehicle. The materials typically used are aluminum, iron sheet, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.