Can the BMW 5 Series perform a launch start?

2 Answers
StRafael
07/29/25 5:40pm
BMW 5 Series can perform a launch start. Precautions for launch start: In the i-drive system, enter the drive menu, then go to the drivelogic menu and change from S5 to S6. After that, press the "M" button on the steering wheel to activate this setting, or manually shift the gear to manual mode "1" and then adjust the drivelogic to full. Turn off DSC, ensure the power button is on and EDC is fully open. Only in this state can the launch start be performed. Optimal RPM: Keep the gear lever pushed forward; once released, the launch mode will not activate. At this point, the brake pedal can be slightly released while fully pressing the accelerator. Then, the current launch RPM can be observed under full throttle. The driver can adjust the RPM up or down using the cruise control lever as needed, with 4000-4500 RPM being the most effective.
Was this review help?
5
3
Share
PaigeRose
08/14/25 9:03am
As an automotive technology enthusiast, I must say that certain BMW 5 Series models do support launch control functionality, especially high-performance versions like the M550i or 540i Sport. When you get in the car, first turn off the Dynamic Stability Control (DSC) system, firmly press the brake pedal to bring the vehicle to a complete stop, shift to Sport mode (S gear), then floor the accelerator. The system will automatically maintain optimal engine RPM range. The moment you release the brake, you'll feel intense acceleration force. This feature utilizes precise coordination between the transmission and electronic control systems to achieve rapid acceleration from standstill, making it particularly useful for track driving or performance demonstrations. However, frequent use can cause additional wear on the engine and clutch while increasing fuel consumption, so it's best reserved for occasional special occasions. Always operate in safe, open areas and consult your owner's manual to confirm whether your vehicle is equipped with this feature to avoid malfunctions from improper operation.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What does it mean when a motorcycle's yellow warning light is on?

Motorcycle yellow warning light may illuminate due to reasons including: poor gasoline quality leading to incomplete combustion of the air-fuel mixture in the cylinder, or faults in the ignition system. Below are detailed explanations of potential causes: Poor air-fuel mixture combustion: When the engine's air-fuel mixture burns poorly, and the mixture in the cylinder becomes too rich, the vehicle may exhibit symptoms such as knocking and vibration. When the mixture is too lean, the vehicle may experience poor acceleration performance. Ignition system: Malfunctions in spark plugs, high-voltage wires, or ignition coils can lead to poor ignition system performance. If spark plugs fail to produce proper sparks, this may trigger the engine warning light and cause vehicle vibration with insufficient power.
17
0
Share

How to Display Fuel Consumption on the Geely Jiaji Dashboard?

You can view it by adjusting the buttons on the left side of the steering wheel. The fuel consumption display is divided into average fuel consumption and instantaneous fuel consumption. This relationship is not absolute. Under the condition that all other factors are the same, an engine with a larger cylinder volume will definitely have higher power and fuel consumption. During daily driving, the maximum RPM of an ordinary family car is only around 6000 RPM. Widening and enlarging the tires increases the friction of the tires, which is equivalent to increasing the load on the car, thus directly increasing the car's fuel consumption.
16
0
Share

469599

Gasoline Filter The gasoline filter, commonly referred to as the fuel filter, is primarily used to remove impurities from gasoline. Below is a detailed introduction: Introduction: The gasoline filter is abbreviated as the fuel filter. There are two types of gasoline filters: built-in and external. The built-in gasoline filter is usually installed inside the fuel tank along with the fuel pump and needs to be replaced every 100,000 kilometers. The external gasoline filter is typically installed in the fuel line, making it easier to replace, and it is generally replaced every 20,000 kilometers. Function: The main function of the gasoline filter is to filter out impurities from the gasoline, ensuring that the fuel entering the engine for combustion is clean. This leads to more complete combustion, reduces carbon deposits in the cylinders, and improves power output.
2
4
Share

Do I need to collect the inspection sticker during the biennial vehicle inspection?

For the biennial vehicle inspection, you need to collect the inspection sticker. Here are the details: Exemption: New vehicles enjoy a 6-year exemption from physical inspection, but the annual inspection sticker must be renewed every two years. The exemption only means the vehicle does not need to go to an inspection station. Nowadays, you can stay at home and use your phone to receive the biennial inspection sticker. Vehicle inspection notes: Note that small and micro non-operational passenger vehicles must be inspected every 2 years within the first 6 years; annually after 6 years; and twice a year after 15 years. Operational passenger vehicles must be inspected annually within the first 5 years and every 6 months after 5 years. Trucks and large or medium non-operational passenger vehicles must be inspected annually within the first 10 years and every 6 months after 10 years.
19
2
Share

Is the vehicle inspection time based on the date on the driving license?

Vehicle inspection time is based on the date on the driving license, which refers to the registration date. Introduction: Annual inspection refers to the annual or biennial safety inspection of vehicles, including a comprehensive check of components such as horns, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Vehicle annual inspection is a mandatory test for all vehicles that have obtained official license plates and driving licenses, equivalent to an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Time: Vehicle annual inspection can be conducted within the last 3 months before the expiration of the vehicle inspection period.
5
3
Share

How Many Points Are Deducted for Obstructing a License Plate?

Intentionally obstructing a license plate will result in a deduction of 12 points, along with corresponding fines. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Driving a motor vehicle on the road without displaying a motor vehicle license plate, or intentionally obstructing, defacing, or not installing the motor vehicle license plate as required, will result in a 12-point deduction. Introduction: License plates, commonly known as vehicle plates, refer to the plates displayed on the front and rear of a vehicle, which are engraved with the vehicle's registration number, registration region, or other relevant information. Function: License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the region to which a vehicle belongs and to allow tracking of the vehicle's owner and registration details based on the plate.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.