Can the Battery of New Energy Vehicles Still Be Used After Being Submerged in Water?

1 Answers
MirandaAnn
07/30/25 6:26am
Minor water ingress into the battery of a new energy vehicle will not affect its performance. Currently, automotive manufacturers use lithium-ion batteries with excellent waterproofing capabilities, allowing the vehicle to continue operating after wading through water. However, drivers should avoid such situations. New energy vehicles operate by using battery current, power regulators, electric motors, and power transmission systems to drive the vehicle. The electric motor converts electrical energy provided by the power source into mechanical energy, with the power source supplying electrical energy to the motor, which then converts it into mechanical energy for the vehicle's propulsion. Precautions for Wading Through Water: Before wading, assess the water depth and duration. Driving is permissible as long as the water depth does not exceed half of the tire's height, but wading time should not exceed 10 minutes. If conditions exceed these limits, drivers are advised to detour. During wading, maintain a steady and smooth speed to prevent high splashes from soaking the chassis, and pass through the water as quickly as possible. After wading, promptly clean the vehicle body and chassis, ensure proper ventilation and drying, and check the front engine compartment for water ingress. Any signs of water infiltration should be addressed immediately to prevent further damage. Special attention should be paid to inspecting the power battery, motor, and wiring harnesses, with immediate action required if any issues are detected.
Was this review help?
7
4
Share
More Forum Discussions

How to Clear an EDC Fault?

EDC fault light on indicates a malfunction in the engine's electronic control system. It is recommended to visit a repair shop for professional servicing and have the technician assist in clearing the fault light. Below is some information about the EDC fault light: 1. EDC stands for Electric-Diesel-Control, representing the electronic control system for diesel injection. 2. An EDC fault refers to an issue with the high-pressure electronic injection and electronic control system, which can be understood as a type of engine malfunction. Specialized computer diagnostics are required for inspection and analysis. Do not attempt to loosen or inspect it yourself, as high-pressure fuel line spraying may cause harm. Professional inspection at a repair shop is necessary.
7
3
Share

What does a 7-speed wet dual-clutch mean?

7-speed wet dual-clutch refers to a wet dual-clutch transmission with 7 gears. Relevant information is as follows: 1. Wet dual-clutch means that the clutch plates are immersed in transmission oil in the dual-clutch transmission. 2. There are two types of dual-clutch transmissions: dry and wet. The clutch plates of a dry dual-clutch transmission are not immersed in transmission oil. The structure of a dual-clutch transmission is very similar to that of a manual transmission, with two sets of clutches. One clutch corresponds to the odd gears (1, 3, 5, 7), and the other clutch corresponds to the even gears (2, 4, 6).
1
3
Share

How to Solve the Problem of Oil Brake Locking Up and Not Returning?

When such a situation occurs, you should go to a professional institution to find a professional for repair. Here is some information about oil brakes: 1. Oil brake is a braking control system that uses hydraulic disc brakes and hydraulic transmission for braking. 2. This braking system is used in cars, bicycles, and electric vehicles. Mountain bike brakes are mainly divided into V-brakes and disc brakes. Among them, disc brakes are further divided into cable disc brakes and hydraulic disc brakes. The characteristics of hydraulic disc brakes are excellent braking effect, good feel, and high sensitivity. The force required on the hand is smoother and more effortless compared to cable disc brakes. Of course, the weight is also relatively greater. However, high-end disc brakes also have very lightweight types, but they are more expensive.
10
5
Share

What Stickers Should Be Placed on the Upper Right Corner of a Car?

Stickers to be placed on the upper right corner of a car: 1. Compulsory Traffic Insurance Sticker: Compulsory traffic insurance is mandatory. Vehicles without it cannot legally operate on the road and are easily flagged by traffic police. After purchasing compulsory traffic insurance, you will receive a compulsory motor vehicle insurance sticker, which must be displayed on the windshield. According to Article 13 of the "Regulations for the Implementation of the Road Traffic Safety Law," the motor vehicle inspection sticker and insurance sticker should be affixed to the upper right corner of the front windshield. Failure to display these stickers as required may result in a fine ranging from 20 to 200 yuan by traffic police. 2. Motor Vehicle Annual Inspection Sticker: New vehicles will receive an annual inspection sticker after registration, which must also be displayed on the windshield. The upper right corner of the front windshield should feature not only the annual inspection sticker but also the environmental protection sticker and insurance sticker. The "Road Traffic Safety Law" stipulates that all vehicles on the road must display the current year's inspection sticker in a visible position on the upper right corner of the front windshield. 3. Temporary License Plate: When purchasing a new car, a temporary license plate must be applied for before obtaining the official license plate. Generally, household vehicles are issued two temporary license plates. One should be affixed to the upper right corner of the front windshield without obstructing the driver's view and should not be covered by the compulsory insurance sticker. The other should be placed on the upper left corner of the rear windshield. Temporary license plates also have an expiration date, and the official license plate must be applied for within the validity period.
12
5
Share

How to Solve the Problem of Brake Lights Staying On After Turning Off the Engine?

Solutions for brake lights staying on after turning off the engine: 1. Replace the brake light switch. When replacing, remove the protective panel above the brake pedal, locate the brake light switch, unscrew it counterclockwise to remove it, then install the new brake light switch by screwing it clockwise and reinstall the protective panel properly. 2. Have a professional replace the brake pads. Reasons why brake lights stay on after turning off the engine: 1. Faulty brake light switch causing the brake lights to stay on after turning off the engine. 2. Overly worn or aged brake pads causing the brake lights to stay on. 3. Some vehicle models come with a warning parking light feature, causing the brake lights to stay on after turning off the engine.
8
2
Share

What's the Difference Between 95 and 92 Gasoline?

95 and 92 gasoline mainly have the following differences: 1. The biggest difference between 92 and 95 gasoline actually lies in the different proportions of n-heptane and isooctane in the two: 92 gasoline contains 92% isooctane and 8% n-heptane; while 95 gasoline contains 95% isooctane and 5% n-heptane. 2. Due to the different proportions of n-heptane and isooctane in the two types of gasoline, it directly leads to the difference in their anti-knock performance. The gasoline octane rating actually represents the anti-knock performance, with a higher number indicating better anti-knock ability (this is because it contains more octane).
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.