Can the Auto Start-Stop Function on BMW 3 Series Be Permanently Turned Off?

1 Answers
Karter
07/25/25 2:06am
You can permanently disable the auto start-stop function via the central control screen. Here is more information about the BMW 3 Series: 1. In terms of power: This car is equipped with a 2.0T turbocharged engine, which comes in three power variants. The 320 model's engine delivers a maximum power of 115kW and a maximum torque of 250Nm, the 325 model's engine offers a maximum power of 135kW and a maximum torque of 300Nm, and the 330 model's engine provides a maximum power of 190kW and a maximum torque of 400Nm. In terms of the transmission system, the engine is paired with an 8-speed automatic manual transmission. 2. In terms of appearance: The overall design of this car is more sporty, with BMW's iconic double-kidney grille further enlarged in size. The front face of the car still features open-eye headlights on both sides, a design that makes the car's front look more refined. 3. In terms of interior: The car's interior adopts a brand-new design, featuring a new LCD dashboard and a multifunctional three-spoke steering wheel. The car's infotainment system is equipped with the latest iDrive 7.0 system, further highlighting the car's sense of technology.
Was this review help?
9
2
Share
More Forum Discussions

How many seconds does the Accord 1.5T take to accelerate from 0 to 100 km/h?

The Accord 1.5T takes 7.5 seconds to accelerate from 0 to 100 km/h. The Accord 1.5T is equipped with a 1.5-liter, 194-horsepower, four-cylinder turbocharged engine. The engine delivers a maximum power of 130 kW and a maximum torque of 230 N·m, with the maximum power achieved at 6,000 rpm and the maximum torque available between 1,500 and 3,000 rpm. The engine is also equipped with VTEC technology. Generally, compact cars with 1.6L engines take between 11 to 13 seconds to accelerate from 0 to 100 km/h, while midsize sedans with 2.0T engines take between 7 to 8 seconds. Supercars, on the other hand, typically achieve this in less than 3.8 seconds. Within the same displacement range, models equipped with turbocharged engines have a clear advantage in the 0-100 km/h acceleration test. This is because turbocharged engines deliver more powerful output and offer a very wide range of maximum torque, enabling the vehicle to achieve maximum acceleration at very low RPMs.
1
4
Share

Where is the Corolla rearview mirror heating switch located?

The Corolla rearview mirror heating switch is located in the middle of the air conditioning fan control knob. Pressing this switch activates the heating function for both the rear windshield and the rearview mirrors. The rearview mirror heating feature is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog, eliminating the need for the driver to manually wipe the mirrors frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror. These wires consume a significant amount of power. When using the rearview mirror heating function, ensure the car is in an ignited state. Avoid activating this function when the car is stationary to prevent draining the car battery, which could lead to insufficient power for starting the engine. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open both side windows slightly to allow air exchange between the interior and exterior, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also help defog the mirrors by blowing warm air.
17
4
Share

What are the functions of the Honda Vezel car key?

The Honda Vezel car key has three main functions: remote unlocking and locking of the car, and mechanical starting of the car. Remote unlocking and locking allow you to lock and unlock the doors from a distance without inserting the key into the keyhole, making it convenient to operate without locating the keyhole. Mechanical starting requires inserting the key to start the car. The Honda Vezel key mainly consists of a transmitter and a receiver. The transmitter is used to send radio signals, with each press sending a signal. The receiver can capture the identification code transmitted by the transmitter via shortwave modulation through the car's shortwave antenna, which is then processed by the distributor into the receiver's electronic control unit for shortwave high-frequency amplification and demodulation. The demodulated identification code is compared; if the code is correct, it is input into the control circuit to activate the actuator. The ignition key with a remote transmitter (available on certain models only) includes unlock and lock buttons. Reasons and solutions for remote battery failure: If the battery is dead or has poor contact, replace the battery promptly; if the time control module in the remote key fails, visit a professional repair shop to replace the control module; if the car's remote transmitter antenna is aging, go to a service station for inspection and repair.
8
2
Share

What is the weight of the Wuling Hongguang Mini?

The total weight of the Wuling Hongguang Mini is 1260kg. Here is some related information about the Wuling Hongguang Mini: Configuration: The Wuling Hongguang Mini's electric motor has a maximum power of 20kw and a maximum torque of 85 Nm. This vehicle is equipped with lithium-ion batteries across all models, which are stronger and have higher energy density. The front suspension of the Wuling Hongguang Mini uses a MacPherson independent suspension, while the rear suspension employs a multi-link non-independent suspension. Dimensions: The Wuling Hongguang Mini has a wheelbase of 1940mm, with a length, width, and height of 2917mm, 1493mm, and 1621mm respectively. It is a 3-door, 4-seater car, with a curb weight of approximately 700 kilograms.
14
3
Share

Which automotive company does Bentley belong to?

Bentley is part of the German Volkswagen Group, with models including the Bentley 8, Turbo R, Continental, Brooklands, Arnage, and Azure. The German Volkswagen Group was founded in 1937, with its headquarters once relocated to Berlin and now located in Wolfsburg. Its major subsidiaries include Volkswagen AG, Audi AG, Škoda Auto, Porsche Group, and SEAT S.A. Brands under the German Volkswagen Group: Volkswagen, Audi, ŠKODA, Porsche, Lamborghini, SEAT, Bugatti, Bentley, Scania, MAN, and Ducati. The Bentley Continental GT 2021 6.0T W12 Mulliner is a 2-door, 4-seater hardtop coupe with dimensions of 4850mm in length, 1954mm in width, and 1405mm in height, a wheelbase of 2851mm, and a top speed of 333 km/h. Its engine delivers a maximum power of 467 kW and a maximum torque of 900 Nm, with a fuel tank capacity of 90L. It features front seatbelt reminders, brake force distribution, traction control, child seat anchors, electronic stability control, and front and rear radar.
4
4
Share

Why does only one reverse light on a Cadillac illuminate?

It is normal for only one reverse light on a Cadillac to illuminate because the other one is a fog light. Having a single reverse light makes it easier to catch the attention of drivers behind and prevents confusion with brake lights. In many developed countries, only one reverse light is permitted, which has been written into law. Introduction to reverse lights: When the car is put into reverse gear, the reverse light switch activates the reverse light circuit, causing the white reverse light at the rear of the vehicle to illuminate. This warns vehicles and pedestrians behind and also serves as illumination. Some vehicles are equipped with reverse beepers or voice warning devices that emit sound signals while reversing to indicate the car is moving backward. How reverse lights work: The reverse light switch operates as a normally open switch (normally disconnected). When the reverse gear is engaged, the mechanical mechanism presses down the switch contacts, closing the circuit and turning on the reverse light and activating the reverse warning sound. When the reverse gear is disengaged, the switch contacts spring back, and the reverse light circuit returns to an open state.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.