Can the air conditioning be turned on when the car is not started?

1 Answers
SanHector
07/24/25 5:08pm
You can turn on the air conditioning when the car is not started, but the air coming from the air conditioner is just the normal air inside the cabin blown by the blower. This is because the air conditioning compressor is driven by the engine's power, so if the engine is not running, the compressor naturally won't work. The natural air blown by the blower is powered by the battery, and excessive use of the blower may drain the battery over time, leading to long-term battery depletion. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety.
Was this review help?
15
2
Share
More Forum Discussions

How often should the Buick Excelle change engine oil?

Buick Excelle should have its engine oil changed every 10,000 to 15,000 kilometers. It is generally recommended to use the original 5W30 semi-synthetic engine oil. Method for changing engine oil: When adding engine oil, ensure the oil level is between the min and max marks on the dipstick. The oil level should not be below the min mark or above the max mark. If the oil level is below the min mark, it can lead to insufficient lubrication, increasing engine wear. If the oil level is above the max mark, it can increase engine resistance during operation, resulting in reduced power and higher fuel consumption. Always check the oil level carefully when adding oil. Precautions for changing engine oil: Engine oil should be changed regularly, and different types of oil should not be mixed. Fully synthetic oil should be changed every 8,000 to 10,000 kilometers, semi-synthetic oil every 5,000 to 8,000 kilometers, and mineral oil around every 5,000 kilometers. Regularly clean the engine air filter and replace the oil filter. After adding oil, sludge and carbon deposits on engine parts disperse into the oil, causing it to darken over time. Typically, the viscosity of the oil should be checked to determine if a change is needed, rather than relying solely on the color. If the oil level is too low, insufficient lubrication can cause cylinder scuffing. If the oil level is too high, it can affect vehicle performance and increase fuel consumption.
9
4
Share

What Causes Engine Shaking at Idle but Smooths Out When Accelerating?

Engine shaking at idle that smooths out when accelerating is a symptom of unstable idle speed, which is one of the most common faults in the daily maintenance of electronically controlled engines. The reasons for idle shaking that disappears upon acceleration include excessive carbon buildup on valves and intake pipes, malfunctions in idle control sensors and related circuits, among others. Below are detailed explanations of the specific causes: 1. Excessive carbon buildup on valves and intake pipes: Carbon deposits can absorb a certain amount of fuel, leading the electronic control unit (ECU) to make incorrect judgments. For example, if the ECU commands the injection of 100 units of air-fuel mixture but only 90 units actually enter the cylinder (with 10 units absorbed by carbon deposits), even if the remaining 90 units burn completely, the required power output cannot be achieved, inevitably causing shaking. 2. Malfunctions in idle control sensors and related circuits: For instance, if the idle switch fails to close, the ECU may mistakenly assume the engine is under partial load, leading to incorrect air intake control. Issues such as delayed or stuck idle valves due to oil contamination or carbon buildup, or a throttle valve not closing properly, can prevent the ECU from accurately adjusting the engine's idle speed. Additionally, faults in the intake air temperature sensor, air flow sensor, coolant temperature sensor, or short circuits/open circuits in sensor circuits can all result in unstable engine idle. 3. Leaks in the intake pipe and various valves: Common issues include cracked intake manifolds or poor sealing of intake manifold gaskets. When there are leaks in the air supply system, the ECU receives inaccurate air intake signals, leading to misjudgments and unstable engine idle.
5
2
Share

What's the Difference Between Tesla All-Wheel Drive and Rear-Wheel Drive?

Tesla all-wheel drive and rear-wheel drive differ in the following aspects: 1. Different driving methods: Rear-wheel drive is suitable for mid-to-high-end electric sedans, while all-wheel drive is typically only equipped in high-end SUVs. 2. Different operational performance: Electric all-wheel drive offers the highest cornering limits on roads, with superior handling performance compared to rear-wheel drive. However, it requires more complex electronic control systems and has a more intricate structural design, even when equipped with batteries of the same capacity. 3. Different range capabilities: Rear-wheel drive vehicles generally have better range than all-wheel drive electric cars. However, in terms of instant power bursts, all-wheel drive is more aggressive, such as in 0-100 km/h acceleration, where all-wheel drive outperforms rear-wheel drive.
10
0
Share

What is the reason why the BMW 730 does not automatically retract the rearview mirrors when locked?

BMW 730 does not automatically retract the rearview mirrors when locked for the following reasons: Battery disconnected or dead: In this case, the exterior rearview mirrors must be reset to function properly. The specific reset method is to manually operate the folding button. After setting "fold mirrors when locking," manual folding was performed: In this case, the exterior rearview mirrors will not automatically unfold after the next vehicle unlock. You need to enter the vehicle and press the button on the door to manually unfold the exterior rearview mirrors. Function of rearview mirrors: Rearview mirrors with folding function can be retracted when passing through narrow sections, improving the vehicle's passability. When the driver leaves the vehicle, the rearview mirrors can also be folded, which not only protects the mirror surface but also reduces parking space and effectively avoids scratches.
9
4
Share

What are the renewal methods after the compulsory traffic insurance lapses?

There are mainly three methods for renewing the compulsory traffic insurance after it lapses. Below is a detailed introduction to these three renewal methods: 1. Renew through the insurance company's business outlets: The policyholder only needs to bring the vehicle license and a copy of their ID card to the insurance company's business outlet to handle the renewal. 2. Entrust a 4S shop to renew the insurance: The price of insurance purchased by a 4S shop on behalf of the car owner is more expensive than other methods, but the one-stop maintenance and claim service of the 4S shop can save the car owner a lot of time and effort. 3. Renew by phone: The car owner can directly call the insurance company's phone number and follow the voice prompts to purchase the insurance.
19
4
Share

What are the Pros and Cons of Car Waxing?

Introduction to the pros and cons of car waxing: 1. Pros: 1. Polishing effect: Polishing is the most basic function of car wax. After waxing, the vehicle's surface brightness can be improved, restoring the body to its original luster. 2. Waterproof and acid rain protection: Due to the protection of car wax, the amount of water droplets adhering to the body is significantly reduced. 3. High-temperature resistance: Cars are exposed to high temperatures and sunlight year-round, which can cause the paint to age and fade. The film formed by waxing can effectively reflect light, preventing the paint or base coat from aging and fading due to incident light. 4. Anti-static effect: Static electricity in cars comes from the friction between interior fiber fabrics and airborne dust during driving. Static electricity often causes many inconveniences, and car wax effectively blocks dust from the body, reducing static electricity generation. 5. UV protection: The UV protection effect of car wax is parallel to its high-temperature resistance. Due to the characteristics of UV light, it easily refracts into the paint surface. UV-protective car wax fully considers this characteristic, minimizing damage to the car's surface. 6. Polishing and buffing effect: When shallow scratches appear on the paint surface, polishing wax can be used without damaging the paint. 2. Cons. 1. Product damage: There are many types of car wax on the market today, with varying effects and performance. Choosing the wrong or inferior wax can damage the paint. 2. Paint wear: Due to the polishing effect, improper operation or repeated polishing with abrasive particles can easily wear the paint surface. 3. Staining: Under high temperatures and prolonged engine operation, the wax can melt and easily adhere to dust and dirt.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.