···
Log in / Register

Can the Accord drive normally when the D gear is flashing?

4 Answers
DeRachel
09/03/25 7:45am

No. When the blue indicator light of the D gear flashes, it indicates a fault in the transmission control system, causing gear shifting impacts. This could be due to issues with the clutch switch, shift solenoid valve, or accumulator. The relevant introduction of the D gear is as follows: The D gear is a commonly used driving position: The D gear is used for driving on general roads and is the most commonly used driving position. During normal driving, placing the gear in D allows the car to automatically shift between 1-3 (or 4) gears. The D gear can be used for overtaking at high speeds: Another characteristic of the D gear is the forced downshift, which facilitates overtaking at high speeds. While driving in D, quickly pressing the accelerator pedal to the floor activates the forced downshift switch, automatically downshifting the gear. The car accelerates quickly, and after overtaking, releasing the accelerator pedal allows the gear to automatically upshift.

Was this review help?
9
3
Share
JoelMarie
09/16/25 2:20am

I've been driving an Accord for almost fifteen years and have encountered the D gear flashing issue a few times. It's usually caused by a faulty transmission sensor or control module, which really makes me nervous. The car might still be drivable for a short distance, but don't expect smooth operation. Last time, I felt gear shifting become jerky while driving, and later inspection revealed a failed oil pressure valve. Thankfully, I didn't push it on a long trip, or the transmission could have been destroyed. I recommend not taking risks—short distances might be manageable, but get it diagnosed at a professional shop as soon as possible. Safety comes first; being responsible for your car means being responsible for yourself. Regular maintenance should include periodic checks of transmission fluid and electrical circuits to prevent such troubles.

Was this review help?
18
1
Share
Expand All
LeCassandra
10/30/25 2:53am

As a regular commuter who drives an Accord daily, I've experienced the D gear flashing and still drove normally for a short distance. It might be a minor issue, such as a faulty gear switch or a computer glitch causing a false warning light alert. If the shifting still feels normal while driving, it's probably not a big deal; but if it keeps flashing non-stop, you should drive with caution. I once had a sudden increase in jerking sensation while driving, which nearly caused an accident. My suggestion is, if you urgently need to use the car, drive slowly to a repair shop for a check-up. A simple diagnosis might resolve the issue promptly. Don't delay too long, as transmission repairs can be very costly. It's better to prevent problems early on.

Was this review help?
13
2
Share
Expand All
LeAliyah
12/13/25 3:01am

I know a bit about cars. The flashing D gear in an Accord is usually triggered by an error code from the transmission system. It could be due to a faulty sensor, interrupted ECU communication, or simply a loose connector causing signal disruption. If the car drives without abnormal vibrations, short-term driving shouldn't be a major issue; but the flashing signal is a warning of potential risks, so it's best to stop and investigate the root cause. I recommend using a self-diagnostic tool to check the error code or trying to restart the vehicle. If the root cause isn't resolved, there's always a hidden risk while driving.

Was this review help?
15
5
Share
Expand All
More Forum Discussions

What are the length, width, and height of the Tiggo 3?

Tiggo 3's length, width, and height are: 4420 mm, 1760 mm, and 1670 mm. The Tiggo 3 is a 5-door, 5-seat compact SUV under the Chery brand, with a wheelbase of 2510 mm, a fuel tank capacity of 55 liters, a trunk capacity of 550 liters, and a curb weight of 1358 kg. The Tiggo 3 is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 85 kW and a maximum torque of 143 N·m. It adopts a front-engine, front-wheel-drive layout, with a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear.
9
5
Share

Can I replace the brake pads of a car by myself?

You can replace the brake pads of a car by yourself. The method for replacing car brake pads is as follows: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the installation bracket of the brake disc and install the new brake pads. The methods to determine whether the brake pads need to be replaced are: 1. Observe that the thickness of the brake pads is only one-third of the original; 2. There is abnormal noise when lightly braking; 3. The braking response is slow, and the braking force becomes weak. Car brake pads, also known as car brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel.
5
3
Share

What Does the Yellow Engine Oil Light Mean?

The yellow engine oil light indicates insufficient engine oil. The effects of insufficient engine oil are: 1. Poor lubrication of various component surfaces, increased friction resistance, accelerated wear of parts, and in severe cases, engine failure; 2. Increased engine noise. Engine oil, also known as engine lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and temperature reduction; 3. Cleaning; 4. Shock absorption and buffering; 5. Rust and corrosion prevention.
8
4
Share

What to Do When the Car Headlight Adjustment Screw Doesn't Work?

The solution when the car headlight adjustment screw doesn't work is: go to a 4S shop for repair or replacement. The method for adjusting car headlights is: 1. Drive the car to a flat and open road surface; 2. Turn on the car headlights, adjust the low beam projection point to about 30m away from the car, making the two projection points coincide; 3. Adjust the high beam projection point to be parallel to the ground. Car headlights, also known as car front lights or car LED daytime running lights, can be maintained by: 1. Regularly checking the seal of the headlights, and replacing the sealing ring between the lens and reflector if damaged; 2. Regularly cleaning the reflector, and replacing it if it turns black or the light intensity decreases; 3. Regularly cleaning dust and stains on the bulb.
8
4
Share

How to Check the Engine Oil in a Lynk & Co 03?

The methods to check the engine oil in a Lynk & Co 03 are: 1. After turning off and cooling the engine, pull out the oil dipstick to check the oil level; 2. Press and hold the start button for ten seconds to view it on the dashboard. Taking the 2021 Lynk & Co 03 as an example, its body structure is a 4-door, 5-seater sedan, with body dimensions of length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 245Nm, paired with a 6-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
19
2
Share

Why Does Coolant Level Decrease?

Coolant level decreases due to: 1. Coolant system leakage; 2. Use of pure water in the radiator; 3. Failure to use specified coolant or coolant containing excessive water content. Coolant is a specialized fluid containing additives, primarily used in liquid-cooled engine cooling systems. Its functions include: preventing radiator cracking and engine cylinder block freezing damage caused by coolant solidification during cold winter shutdowns. Precautions for coolant usage: 1. Never mix different types of antifreeze; 2. Never open the radiator cap or drain valve immediately after driving; 3. Completely remove old antifreeze and thoroughly clean the radiator during coolant replacement.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.