Can the 2021 Camry Support USB Drives?

1 Answers
VanMila
07/30/25 12:03am
2021 Camry can support USB drives. USB Port: The USB port in the Camry is located below the center console, next to the cup holder. There is a cover that can be opened to reveal the USB port. Generally, devices other than computers only support USB drives formatted in FAT32, and the USB drive must be a single partition without any hidden partitions. Function of USB Port: Many car USB ports are designed for audio data transmission. The current of the car's USB port can be either 5V/2.1A or 5V/0.5A. Most mobile phones require an input current of 5V/1A, so a 5V/2.1A car USB port is sufficient, providing 1A current for mobile phones and 2A current for tablets.
Was this review help?
14
1
Share
More Forum Discussions

Where is the car air conditioning temperature sensor located?

In-car air conditioning temperature sensors are typically installed under the dashboard. Below are detailed introductions to components of the automotive air conditioning system: 1. Air conditioning pressure sensor: Usually installed after the dryer, it detects the hydraulic pressure of liquid refrigerant flowing through the expansion valve. Three wires: detect high and low pressure. When refrigerant leaks and compressor oil loss occur after a collision, to prevent compressor damage from oil starvation, it immediately cuts off compressor power upon detecting low pressure. When high pressure is detected, it reduces compressor power to avoid wasted work. 2. Air conditioning temperature sensor: Generally housed in the temperature sensing bulb, it functions as the evaporator temperature sensor. When cooling reaches a certain level, it shuts down the compressor to prevent frosting and eventual ice blockage from further refrigeration.
19
1
Share

What Causes the Car Not to Move When in Gear?

Car not moving after shifting gears is a comprehensive functional failure of the vehicle. Below are relevant details about gear shifting: 1. Introduction: Gear shifting is the abbreviation for "gear lever operation method," referring to the driver's psychological and physiological movements to continuously adjust the gear lever position based on road conditions and vehicle speed changes. 2. Function: Gear shifting can alter the car's speed. 3. Technical requirements: The technical requirements for gear shifting can be summarized into eight words: timely, correct, smooth, and swift. (1) Timely: Master the appropriate shifting timing, neither upshifting too early nor downshifting too late. (2) Correct: The coordination among the clutch pedal, accelerator pedal, and gear lever must be accurate and harmonious, with precise positioning. (3) Smooth: After engaging a new gear, release the clutch pedal promptly and smoothly. (4) Swift: Actions should be quick to minimize shifting time, reduce kinetic energy loss, and lower fuel consumption.
12
3
Share

How to Check Vehicles Registered Under Your Name?

You need to bring relevant documents to the local vehicle management office for inquiry. In China, the management is quite strict, and online inquiries are not allowed. Only specific authorities can conduct inquiries through strict procedures. The vehicle registration information database of the transportation department is only open internally and cannot be publicly accessed online. Required documents include: 1. For personal vehicles: the original and photocopy of the owner's identity certificate, and the original and photocopy of the vehicle license. 2. For company vehicles: the original and photocopy of the organization code certificate of the company, a power of attorney from the legal representative, and the original and photocopy of the handler's identity certificate, as well as the original and photocopy of the vehicle license.
4
5
Share

Can the front bumper be pushed back in if it falls off?

Can the front bumper be pushed back in if it falls off? The front bumper can be pushed back in. However, it won't stay in place and requires repair. Here is some information about car bumpers: 1. Installation purpose: Cars are equipped with bumpers at both the front and rear ends, which not only serve a decorative function but, more importantly, act as safety devices that absorb and mitigate external impacts, protecting the vehicle body and the safety of passengers. 2. Material composition: The outer panel and cushioning material are made of plastic, while the crossbeam is formed by stamping cold-rolled thin steel sheets about 1.5 mm thick into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the frame longitudinal beams with screws, allowing for easy removal when necessary.
3
2
Share

What are the reasons for the Citroen C-Quatre not accelerating when stepping on the accelerator?

The reasons for the Citroen C-Quatre not accelerating when stepping on the accelerator are as follows: 1. Use of low-quality gasoline: Low-quality gasoline contains more impurities, which can lead to low fuel calorific value and reduced thermal efficiency. Prolonged use of low-quality gasoline not only weakens the car's power but also easily forms carbon deposits, damages the engine, and reduces its lifespan. 2. Blockage in the intake system: Blockage in the intake system reduces oxygen content, leading to incomplete fuel combustion. Intake system blockage is usually caused by issues with the throttle. Cleaning the throttle can solve the problem. 3. Fuel injector malfunction: A clogged fuel injector results in poor atomization. Replacing the fuel injector can resolve the issue.
2
2
Share

Do I need to manually release the electronic parking brake when starting?

The electronic parking brake will release automatically. When driving, if the car stalls or the seatbelt is unfastened, the electronic parking brake will automatically engage to assist the driver. When you get back in the car, fasten your seatbelt, and close the door, simply pressing the accelerator pedal will automatically release the electronic parking brake. If the electronic parking brake is accidentally engaged while driving at high speed, it will not respond immediately. Instead, it will only activate when the vehicle speed approaches a stop, typically below 10 km/h. The electronic parking brake system offers the following advantages: 1. Eliminating the parking brake lever inside the cabin provides more design flexibility for the interior styling; 2. Replacing the traditional handbrake lever with a button makes operation simpler and less strenuous, reducing the effort required by drivers, especially female drivers; 3. In addition to basic functions like static parking, static release, and automatic release, the system also includes auxiliary features such as automatic parking and dynamic parking.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.