Can Temporary License Plates Be Captured by Speed Cameras on Highways?

1 Answers
EvanMarie
07/30/25 10:55am
Temporary license plates cannot be captured by speed cameras on highways. Here is the relevant information: Note: However, for safety reasons and to cherish life, do not drive illegally on highways. Temporary License Plates: Temporary license plates are paper-based motor vehicle plates that permit temporary road use, also known as temporary vehicle license plates. They are temporary driving permits issued by the vehicle management department of the public security bureau for newly purchased vehicles before official registration. The validity period of temporary license plates generally does not exceed thirty days. Speed Cameras: Speed cameras, commonly known as "electronic eyes" or "electronic police," are part of the "Intelligent Traffic Violation Monitoring and Management System." Developed and successfully implemented in Shenzhen in 1997, they have since been gradually promoted nationwide. Speed cameras utilize various technologies such as vehicle detection, photoelectric imaging, automatic control, network communication, and computer systems to monitor traffic violations, including running red lights, driving in the wrong direction, speeding, crossing lanes, and illegal parking.
Was this review help?
10
1
Share
More Forum Discussions

Why is the CVT transmission so smooth?

Because the CVT transmission is a continuously variable transmission, this type of transmission does not have fixed gears. The process of changing speed and torque is continuous, so there is no jerking, making it very smooth. Here is a detailed introduction to the CVT transmission: 1. The structure of the CVT transmission is very simple. It consists of two cone-shaped pulleys and a steel belt inside. The steel belt can move on the pulleys, allowing the transmission to vary speed and torque. Conventional transmissions have different gear sets, and the gear ratio span in these transmissions is larger than that of a CVT, resulting in jerking after gear shifts. 2. Conventional transmissions are like climbing stairs, where each step represents a gear. Transmissions with more gears have smaller step heights, reducing jerking. Transmissions with fewer gears have higher step heights, leading to more noticeable jerking during shifts. In contrast, the CVT transmission replaces the stairs with a smooth ramp, which has no steps, giving the CVT excellent smoothness.
9
4
Share

What is the engine cylinder pressure?

Automobile engine cylinder pressure is around 1000kpa. Generally, gasoline engines are around 1000kpa, diesel engines are around 2000kpa, most fuel injection engine cylinder pressures are between 1200~1400kPa, and a few high compression ratio engines have cylinder pressures above 1700kPa. A cylinder is a piston in the automobile combustion chamber that is driven by the pressure or expansion force of the working fluid. The classification of cylinders is as follows: 1. Single-acting cylinder: Only one end has a piston rod, and air is supplied from one side of the piston to generate air pressure, which pushes the piston to produce thrust for extension, and returns by spring or self-weight. 2. Double-acting cylinder: Air is alternately supplied from both sides of the piston, and force is output in one or two directions. 3. Diaphragm cylinder: A diaphragm is used instead of a piston, and force is output in only one direction, with spring reset. It has good sealing performance but a short stroke.
10
1
Share

How to Solve the Problem of Unsteady Throttle Pedal Operation?

Here are the solutions for unsteady throttle pedal operation: 1. Place the right heel on the floor of the driver's compartment as a pivot point, gently press the ball of the foot on the accelerator pedal, and use the ankle joint's extension and flexion movements to press down or release. When operating the throttle pedal, ensure gentle pressing and slow releasing. 2. Select an appropriate gear to keep the engine running at medium speed and larger throttle opening most of the time, which helps save fuel. Releasing the clutch should be closely coordinated with pressing the throttle, and the action should be swift. 3. Before stopping the car or turning off the engine, release the throttle pedal first and avoid revving the engine abruptly. Here is some additional information about the throttle pedal: 1. The throttle pedal, also known as the accelerator pedal, is part of the car's fuel supply system. By controlling the amount of pedal depression, it regulates the engine throttle opening, controls the air intake, and the computer adjusts the fuel quantity, thereby controlling the engine speed. 2. Most throttle pedals are made of aluminum alloy. Adding an additional throttle pedal can significantly increase the vertical contact area of the pedal.
15
5
Share

Is Toyota 0w20 Oil Fully Synthetic?

Toyota's original 0w20 oil is fully synthetic. In addition, GAC Toyota's engine oil is also fully synthetic. Fully synthetic oil is made from the better components of crude oil and shows significant performance advantages compared to mineral oil and semi-synthetic oil. Oil Performance: The performance of 0w20 oil is generally moderate. Applicable Vehicle Models: The 0W-20 oil is suitable for FAW/GAC Toyota models but not for engines of types 5A-FE, 8A-FE, and 1FZ-FE. The oil change interval is 5000 kilometers or one year, but in practice, further judgment should be made based on the vehicle's actual condition. Precautions for Using Engine Oil: Under the premise of ensuring reliable lubrication for the engine, engine oil with lower viscosity should be selected. High-viscosity oil, except for use in southern summers, is only suitable for some severely worn engines. Choosing high-viscosity oil will increase the resistance during engine operation, thereby increasing fuel consumption. Selecting oil with excessively low viscosity may result in low oil pressure, insufficient lubricating film strength, and poor sealing. Therefore, the correct choice of engine oil should be based on the vehicle's condition and the season.
16
2
Share

How to Drain Gasoline from a Vehicle?

To drain gasoline from a car, you can release the fuel at the gasoline filter located under the vehicle or by opening the drain screw beneath the fuel tank. Below are additional methods for extracting fuel: 1. Normally, it's not possible to siphon gasoline directly from the fuel tank of a small car because the tank opening has a U-shaped design that prevents a hose from being inserted. Instead, you can disconnect the engine's return fuel line and collect the fuel while the engine is running. However, extreme caution is required to prevent fuel from splashing, especially onto the ignition system, as this could easily cause a fire. 2. Alternatively, you can use a specialized fuel tank siphon pump available on the market. Since siphoning fuel on level ground is challenging, find a sloped area, park the car with the front facing uphill, and engage the handbrake. Once the car is securely positioned, open the fuel tank cap and insert the siphon hose into the tank, pushing it as far down as possible. Place the outlet end of the hose into a container for collecting the fuel, ensuring the hose is positioned as low as possible. After draining, allow any excess fuel in the hose to flow back into the tank to avoid wastage.
5
5
Share

When will Beijing implement China 6 emission standards

Beijing implemented the China 6 emission standards on January 1, 2020. Currently, the national China 6 standards are divided into two phases: "China 6a" and "China 6b", with nationwide implementation planned for 2020 and 2023 respectively. Here is additional information: 1. The China 6 standards, officially known as "National Sixth Stage Emission Standards for Motor Vehicles", were established to enforce environmental protection laws, reduce and prevent vehicle exhaust pollution, protect the ecological environment, and safeguard human health. 2. The China 6 standards were issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision on December 23, 2016 and June 22, 2018 respectively. The "Limits and Measurement Methods for Emissions from Heavy-duty Diesel Vehicles (China VI)" came into effect on July 1, 2019. The implementation of China 6 standards imposes stricter requirements on pollutants such as carbon monoxide, nitrogen oxides, and hydrocarbons.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.