Can't the window glass on both sides wipe off rainwater?

Is it necessary to fully depress the clutch every time when downshifting?

Every time you downshift, you need to fully depress the clutch. Precautions for downshifting a car: Before shifting gears, you must first fully depress the clutch pedal. The operation of the gear lever should be light, fast, gentle, and accurate; gear shifting requires finding the right timing. When downshifting, you can only shift into a lower gear when the vehicle speed drops to a certain value. The reason for fully depressing the clutch when shifting gears: Fully depressing the clutch when shifting gears is to completely disconnect the engine from the transmission gears. After changing the gear set through the gear lever, they are reconnected. Since the gear sets before and after shifting are different, there is a speed difference between the gear sets to be reconnected after shifting, which is synchronized through the synchronizer. During the shifting process, if the clutch is not fully depressed, there will be a significant speed difference between the shifting gear set and the transmission gear set, making smooth meshing difficult. In mild cases, it increases wear, and in severe cases, it can cause gear grinding, leading to transmission damage.

17

0

Share

What are the corresponding speed ranges for each car gear?

Start from 1st gear, and when the speed reaches 15km/h, you can shift to 2nd gear; when the speed reaches 25km/h, you can shift to 3rd gear; when the speed reaches 35km/h, you can shift to 4th gear; when the speed reaches 45km/h, you can shift to 5th gear. Gear shifting operation: Depress the clutch pedal—quickly release the accelerator—shift to the corresponding gear—match the accelerator according to the gear, or do not press the accelerator, quickly lift the clutch pedal to the semi-engaged state—after the clutch engages, gently release the clutch pedal. For beginners, besides mastering the timing of gear shifting as soon as possible, the gesture for shifting is also important. When shifting, keep the five fingers together, hold the gear knob loosely but firmly, and use the forearm to drive the hand to shift. Pay attention to shifting gently and slowly, without using too much force, to avoid shifting into the wrong gear. Always pause in neutral when shifting. If you shift into the wrong gear, don’t panic; you can return to the original gear and shift again.

13

3

Share

Where is the Baojun 360 engine produced?

Baojun engines are produced at the engine plants of SAIC-GM-Wuling Automobile Co., Ltd. located in Liuzhou and Qingdao. The 1.5L engines are manufactured at the Liuzhou base, while the 1.8L engines are produced at the Qingdao base. Below is some relevant information about the Baojun 360: 1. The 1.5L engine equipped in the Baojun 360 is produced in Liuzhou. The Baojun 360 is powered by a General Motors 1.5L naturally aspirated engine, delivering a maximum power of 82kw and a maximum torque of 146Nm, providing ample and reliable power output. Additionally, the official fuel consumption of the Baojun 360 reaches 6.9L/100km, making it more economical and practical, as well as cost-effective. 2. The Baojun 360 features an overall gray color scheme in its exterior design, with the front face maintaining the traditional family-style design. The four horizontal chrome decorative strips make it more outstanding and attractive compared to the Baojun 370. The headlights are designed to be narrow and long, using halogen lamps, giving it a strong sporty feel. As a six-seater MPV, the biggest highlight of the Baojun 360 is undoubtedly its space design.

8

2

Share

Will Baijiu Left in a Car During Summer Spontaneously Combust?

Leaving alcohol in a car during summer can lead to spontaneous combustion. Common 75% medical alcohol has a flash point of 20 degrees Celsius, while outdoor temperatures at noon in summer can exceed 40 degrees Celsius. If a car is parked outdoors under direct sunlight for an extended period, the interior temperature can rise to over 50 degrees Celsius, which can easily trigger spontaneous combustion and explosion of the alcohol. It is not recommended to store alcohol in a car: From a safety perspective, it is not advisable to keep 75% alcohol in a car because its flash point is only 20 degrees Celsius. If the interior temperature becomes too high, it may cause combustion. Therefore, it is best to avoid storing alcohol in the car. If disinfection is necessary, find an open area to wipe the car interior with alcohol and ensure proper ventilation for some time afterward. When using alcohol inside a car: If the car seats or steering wheel are made of genuine leather, spraying alcohol directly on the leather can cause damage. Alcohol is an organic solvent, and especially in cars with lower-quality leather, it may change the smooth, uniform color to a texture resembling that of a jaguar.

17

2

Share

What does the vehicle code location mean?

Vehicle code location refers to the position where the vehicle code is located. The vehicle code can be found at the lower left corner of the front windshield or on the inner side of the door near the driver's seat. The vehicle code is the chassis number, also known as the Vehicle Identification Number (VIN). It is a unique set of numbers on a vehicle that identifies the manufacturer, engine, chassis serial number, and other specifications. Here are the ways to locate the vehicle code: The first method is to check the accompanying vehicle documents. The vehicle identification number (VIN) is clearly marked on the vehicle registration certificate, and it is also recorded or pasted on the insurance policy and the vehicle maintenance manual. The second method is to locate it externally on the vehicle. The most common location is on a label at the lower left corner of the windshield, which displays the 17-digit VIN. The third method is to find the stamped number on the vehicle body. During manufacturing, the VIN is stamped onto the vehicle body to facilitate identification for registration or transfer purposes after sale. Common locations include under the seats, near the shock absorber mounts in the engine compartment, and on the body frame in the trunk. The exact position may vary depending on the vehicle brand.

17

4

Share

Do You Need to Press AC When Turning on the Car Heater?

You don't need to press AC when turning on the car heater. AC is for activating the air conditioning compressor, meaning that only when this button is pressed will the compressor work, and the air blown out by the blower will be cold. If you turn on the heater and also press AC, it will increase the vehicle's fuel consumption. AUTO is a unique function of automatic car air conditioning, which automatically selects between cold and hot air based on the set interior temperature. However, the AC button exists independently and won't automatically activate when cooling isn't needed. The purpose is to keep the compressor from working when cooling is unnecessary to save fuel.

6

5

Share

Can't the window glass on both sides wipe off rainwater?

Is it necessary to fully depress the clutch every time when downshifting?

What are the corresponding speed ranges for each car gear?

Where is the Baojun 360 engine produced?

Will Baijiu Left in a Car During Summer Spontaneously Combust?

What does the vehicle code location mean?

Do You Need to Press AC When Turning on the Car Heater?

What are the consequences of using 92-octane gasoline in a car specified for 95-octane?

What are the effects of not releasing the handbrake on the car?

What are the symptoms of a flywheel failure?

What does OBD mean in cars?