Can Subject 3 be scheduled only 30 days after completing Subject 1?

What are the types of valve trains?

According to the different installation positions of the valves, the valve train can be divided into overhead valve train and side valve train. The following is a detailed introduction about the valve train structure: 1. When the valves are located on the cylinder head, it is called an overhead valve train, which consists of cam, tappet, push rod, rocker arm, valve and valve spring, etc. Its characteristics are small intake resistance, compact combustion chamber structure, large airflow disturbance, and the ability to achieve a high compression ratio. Currently, domestic automobile engines all adopt the overhead valve train. 2. When the valves are located on the side of the cylinder block, it is called a side valve train, which consists of cam, tappet, valve and valve spring, etc. It eliminates parts such as push rods and rocker arms, simplifying the structure. Because its intake and exhaust valves are on one side of the cylinder, the compression ratio is limited, and the intake and exhaust resistance is large. The power and high-speed performance of the engine are relatively poor, and it has been gradually phased out.

20

1

Share

How to Determine the Amount of Transmission Fluid?

Transmission fluid level can be determined as follows: 1. Park the vehicle on a level and straight road surface. 2. Start the engine and warm it up until the coolant temperature reaches above 90 degrees Celsius. Keep the engine running for several minutes. 3. Shift the gear lever from P (Park) through each gear position and then back to P. Press the brake pedal and move the gear lever to positions such as R (Reverse) and D (Drive), pausing for a few seconds in each position to ensure the torque converter and all shift actuators are filled with hydraulic fluid. Finally, shift the gear lever back to P (Park) to allow the fluid to enter the valve body and corresponding oil passages. 4. Pull out the automatic transmission dipstick from the filler tube, reinsert it fully, then pull it out again. Check the fluid level on the dipstick. The fluid level should be near the upper limit mark on the dipstick to indicate the correct amount of fluid.

17

4

Share

How to Clean Car Seats?

Car seats can be sent to professional car cleaning shops for cleaning or cleaned by yourself. The self-cleaning method is as follows: 1. First, use a vacuum cleaner to remove any remaining debris or dust on the surface, then wipe the seat surface with a damp towel (preferably white). If it's still not clean, use a cleaning agent for further cleaning; 2. The general cleaning method for fabric seats is to first open all the car doors and use a duster to remove the dust, then use a vacuum cleaner to suck out the debris; 3. When using a cleaning agent, try to spread the foam on the seat surface as much as possible to lift the dirt attached to the seat surface; 4. Finally, use a wrung-out damp towel to wipe off the foam. After cleaning, open all the car doors to maintain good ventilation so that the seats dry as quickly as possible.

10

3

Share

What type of oil should a Compass use?

The Compass should use 5W20 fully synthetic oil. The oil type should be adjusted according to the regional environment. Taking 0W-20 as an example: the 0W in 0W-20 indicates the cold-start performance of the oil. Replacement interval for fully synthetic oil: Under normal circumstances, fully synthetic oil can be replaced every 10,000-12,000 kilometers or every six months. However, the actual replacement time depends on usage conditions. When the driving environment is dusty, temperatures are relatively low, or the vehicle is frequently used for short trips, the replacement interval for fully synthetic oil should be shortened to ensure smooth engine operation. Precautions for using fully synthetic oil: When changing the oil, it is best to replace the oil filter as well, otherwise accumulated impurities can easily cause blockages; the oil pan bolt should be replaced each time the oil is changed, as the oil pan screw serves as a protective measure for modified engines or engines under long-term high-load use.

17

1

Share

Is the Compass automatic or manual transmission?

The Compass is equipped with an automatic transmission. The 7-speed dry dual-clutch transmission is an automatic transmission, also known as a manual-automatic transmission. Both manual-automatic transmissions and dual-clutch transmissions are types of automatic transmissions, representing upgraded products for automatic vehicles, providing drivers with a more comfortable driving experience. When these two types of transmissions are used in manual mode, shifting gears only requires moving the transmission lever. A manual-automatic transmission combines the manual and automatic shifting modes of a car. A dual-clutch transmission is a type of automatic transmission mechanism. It essentially uses two manual transmission clutches to achieve automatic gear shifting, with one engaging while the other disengages. This solves the issue of higher energy consumption in continuously variable automatic transmissions while eliminating the cumbersome operation of manual gear shifting. A dual-clutch transmission is a car transmission with two sets of clutches. In terms of classification, dual-clutch transmissions can be roughly divided into wet dual-clutch transmissions and dry dual-clutch transmissions. Currently, mainstream dual-clutch transmissions generally come with either six or seven gears.

2

4

Share

What is the correct parking method for the Lavida automatic transmission?

The correct parking method for the Lavida automatic transmission is for the owner to slow down, stop, shift to N gear, turn off the engine, engage the handbrake, and then shift to P gear. The following is an introduction to the Lavida car: 1. Brand Origin: The Lavida is a sedan produced by Shanghai Volkswagen, with the English name LAVIDA, which signifies life, living, and hope. It represents the dynamic vitality of life and a lifestyle full of fun, advocating the latent potential of life that bursts from within and the passion and motivation to move towards a better life. 2. Body Dimensions: The Lavida has a body length, width, and height of 4608mm, 1743mm, and 1465mm respectively, with a wheelbase of 2410mm. 3. Powertrain: The Lavida is equipped with an EA111 direct injection engine, with a maximum power of 96Kw, a maximum torque of 220Nm, and a maximum horsepower of 131Ps.

17

4

Share

Can Subject 3 be scheduled only 30 days after completing Subject 1?

What are the types of valve trains?

How to Determine the Amount of Transmission Fluid?

How to Clean Car Seats?

What type of oil should a Compass use?

Is the Compass automatic or manual transmission?

What is the correct parking method for the Lavida automatic transmission?

How to fold down the rear seats of the Kia K3?

What Causes the Abnormal Noise When Turning the Steering Wheel of a Compass While Stationary?

What is the original tire of the Compass?

What is the Essence of Braking?