Can Stepping Hard on the Accelerator Damage the Battery of a New Energy Vehicle?

1 Answers
HavenMarie
07/29/25 8:14pm
Stepping hard on the accelerator of a new energy vehicle can indeed damage the battery. Frequently pressing the accelerator aggressively will affect the battery's lifespan, as it causes the power battery to discharge with high current frequently. It is well known that if the discharge current is too high, additional lithium ions are consumed to compensate, leading to battery degradation. Charging Temperature: For the battery itself, charging in excessively high or low temperatures can have adverse effects. The electrolyte used in lithium batteries is an organic system, which significantly slows down the charging speed in low temperatures and may prevent a full charge. Discharging is similarly affected. In contrast, high temperatures enhance battery performance, allowing for very fast charging. Parking Location: Modern new energy vehicles are equipped with lithium batteries, which accelerate aging if exposed to temperatures exceeding 60 degrees Celsius. Therefore, especially in summer, it is important to pay attention to where the vehicle is parked. It is best to park in a shaded area to avoid prolonged exposure to high temperatures. In winter, it is also necessary to keep the new energy vehicle warm.
Was this review help?
7
0
Share
More Forum Discussions

What happens if spark plugs are not replaced for a long time?

The effects of not replacing spark plugs for a long time include: 1. Increased fuel consumption and loss of vehicle power; 2. Difficulty in starting the car, with severe shaking occurring during startup; 3. Damage to the car's catalytic converter, leading to excessive exhaust emissions. The functions of spark plugs are: 1. To introduce the high voltage electricity generated by the ignition coil into the engine cylinder; 2. To generate sparks between the spark plug electrode gaps to ignite the air-fuel mixture, ensuring normal engine operation. The types of spark plugs include: 1. Standard spark plugs; 2. Insulator projection spark plugs; 3. Electrode spark plugs; 4. Seat-type spark plugs; 5. Pole-type spark plugs; 6. Surface gap spark plugs.
18
3
Share

How Often Should Car Door Seals Be Replaced?

Car door seals should be replaced every 3 to 4 years. Seals are commonly found on car doors, windshields, and power windows, serving to prevent water from entering the vehicle and enhancing sound insulation. These seals fill gaps between body components, providing functions such as vibration reduction, waterproofing, dustproofing, sound insulation, and decoration. Key considerations for replacing seals include: 1. Before replacement, carefully compare the existing seals on the vehicle to select the correct type, as different car models use different seal designs; 2. After selecting the appropriate seal, remove the old seal and thoroughly clean the area where the new seal will be applied before installation.
1
3
Share

How many kilometers for the first maintenance of Honda Civic?

Honda Civic's first maintenance is recommended at 3,000 to 5,000 kilometers. The maintenance items include: 1. Check whether the tire pressure is normal and whether the tires have uneven wear, bulges, or damage; 2. Inspect the car chassis, brake pads, brake discs, connecting rods, ball joints, and CV joints for scratches; 3. Replace engine oil, oil filter, and clean the air filter; 4. Check whether the generator belt and wiper blades are damaged; 5. Check whether the levels of various fluids are normal; 6. Inspect all switches and lights to ensure they are working properly. Taking the 2021 Honda Civic as an example, it is a compact car with a body size of 4517mm in length, 1799mm in width, and 1434mm in height, a wheelbase of 2700mm, a minimum ground clearance of 104mm, and a curb weight of 1343kg.
12
4
Share

What models are compatible with 70/90-10 tires?

Tires should be purchased and installed with the same model as the original vehicle tires. Inconsistent models will affect the safety and stability of the vehicle. The following is relevant information about tires: 1. Wear: Tires have wear indicators. There are triangle marks on the side of the tire. When worn to the position indicated by the triangle mark, it is recommended to replace the tire. There are also raised marks inside the tire tread grooves. When worn to the point where the raised marks are level with the tire surface, the tire should be replaced. Simple punctures can be repaired without replacement. Bulges must be replaced. 2. Aging: Rubber oxidizes in the air, and oxidized rubber hardens, reducing grip. Therefore, even if a set of tires is left unused, their lifespan will decrease. It is not recommended to use tires for more than 5 years from the production date. The production date is indicated on the side of the tire.
13
3
Share

How to Solve the Brake Squealing Issue in Octavia?

The solutions for brake squealing in Octavia are: 1. Apply butter or special lubricating oil at the connection between the brake pads and the brake caliper; 2. Regularly inspect and replace the brake pads; 3. Regularly adjust the brakes; 4. Avoid frequent use of brakes. The maintenance methods for brakes are: 1. Clean the oil stains on the brake discs, brake drums, and brake pads to ensure good heat dissipation of the brake discs; 2. Regularly replace the brake fluid; 3. Regularly check the thickness of the brake pads or brake shoes. Taking the 2020 Octavia as an example, it belongs to the compact car category, with body dimensions of: length 4675mm, width 1814mm, height 1460mm, wheelbase of 2686mm, fuel tank capacity of 51l, and curb weight of 1210kg.
12
3
Share

What are the advantages of a six-cylinder engine over a four-cylinder engine?

Six-cylinder engines have less vibration and offer better operational quality. The differences between four-cylinder and six-cylinder engines are as follows: 1. Different number of cylinders: A six-cylinder engine has six cylinders; a four-cylinder engine has four cylinders. 2. Different ignition intervals: The firing order for a six-cylinder engine is 1, 5, 3, 6, 2, 4, with an ignition interval of 60 degrees; the firing order for a four-cylinder engine is 1, 3, 4, 2, with an ignition interval of 180 degrees. 3. Different number of intake or exhaust manifolds: A six-cylinder engine has six intake or exhaust manifolds; a four-cylinder engine has four. 4. Different structure: Six-cylinder engines have a more complex structure, larger size, greater weight, and more complex layout. Four-cylinder engines are relatively simpler, with one less cylinder. Structurally, six-cylinder engines have one more cylinder than four-cylinder engines, and accordingly, they also have more camshaft accessories.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.