Can someone other than the car owner handle vehicle inspection in another city?

1 Answers
Jan
07/29/25 11:30pm
Vehicle inspection in another city can be handled by someone other than the car owner. Here are the relevant details: Power of attorney is required: The car owner needs to obtain a Notice of Entrusted Inspection from the original vehicle registration authority, authorizing another city's vehicle management office to conduct the annual inspection of the vehicle. When applying for the power of attorney for cross-city vehicle inspection, the car owner does not necessarily have to go in person. Relatives or friends can handle it at the original registration location and then mail it back to the inspection city. Important notes: It should be noted that the power of attorney for vehicle annual inspection must be obtained from the original registration authority. Without this power of attorney, vehicles registered in other locations cannot undergo normal annual inspections elsewhere. Currently, the only documents required for vehicle inspection in another city are the original vehicle license, copy of compulsory insurance policy, and a photocopy of ID card.
Was this review help?
14
3
Share
More Forum Discussions

How many kilometers should a BMW be driven for its first maintenance?

BMW's first maintenance is at 10,000 kilometers, and the first maintenance is free (depending on road conditions and regions, dealers recommend the first maintenance to be performed at 7,000 to 8,000 kilometers). The maintenance precautions are as follows: 1. The maintenance cycle for all BMW models is 10,000 kilometers, and engine oil and oil filters must be replaced during each maintenance. Engine oil is a necessary lubricant for the engine, and each vehicle has different performance requirements for engine oil, so it should not be used randomly. 2. It is recommended to replace the air filter, cabin air filter, and fuel filter every 20,000 kilometers. 3. It is recommended to replace the spark plugs every 50,000 kilometers; brake fluid should be replaced every two years. 4. Transmission fluid is usually changed every 30,000 miles, and like engine oil, transmission fluid must also use a specific type. 5. BMW vehicles use DOT4 brake fluid, which has a high boiling point characteristic. Brake fluid will produce water vapor evaporation during use. It is recommended to replace the brake fluid every two years for BMW vehicles, but this depends on the vehicle's usage environment.
14
1
Share

What is the inspection cycle for motorcycles?

Motorcycles must undergo inspection once every 2 years within the first 4 years; after exceeding 4 years, annual inspection is required. Below is an extended introduction: 1. Clear regulations: Every motorcycle must comply with annual inspections to ensure legal compliance and driving safety. When processing annual inspections, relevant materials must be submitted according to the required procedures. 2. Introduction to initial inspection: The inspection conducted for motor vehicles to apply for license plates is called the initial inspection. The purpose of the initial inspection is to verify whether the vehicle meets the conditions for license plate application. Inspection items include: presence of the vehicle user manual, certificate of conformity (import vehicles require commodity inspection certificates), completeness of factory sample marks on the vehicle body; measurement of the vehicle's external and internal dimensions, wheelbase, and axle track. Specific measurement items include vehicle length, width, height, cargo compartment sideboard height and area, wheelbase, and axle track. Each item is inspected according to technical standards. Upon passing, the "Motor Vehicle Initial Inspection Alteration Registration Form" is filled out, including the manufacturer-specified data such as curb weight, load capacity, passenger capacity, and driver's compartment seating capacity.
19
2
Share

How to Steer When Turning a Car?

Hold the left hand at the 9 o'clock position and the right hand at the 3-4 o'clock position, with the thumb on the inside of the steering wheel and the other four fingers on the outside. First, turn on the left turn signal, use the left hand to steer to the left, and assist with the right hand pushing to the left. After turning, use the right hand to steer back to the right. First, turn on the right turn signal, use the right hand to steer to the right, and assist with the left hand pushing to the right. After turning, use the left hand to steer back to the center. Making a U-turn is an unavoidable skill in daily driving. There are two scenarios: first, if there is ample space ahead, you can "take a wide turn." The key to navigating continuous curves is to slow down. Before entering a curve, you can lean slightly to the right. If turning right, you can lean slightly to the left.
17
0
Share

What car is represented by five bars?

The five-bar emblem is the logo of WM Motor. WM Motor's logo consists of five vertical bars. Founded in 2015, WM Motor completed a Series C financing round totaling 3 billion RMB on March 8, 2019. WM Motor primarily manufactures pure electric vehicles. Below is some relevant information about WM Motor: 1. The WM Motor logo is composed of five vertical bars, each with its own special meaning, representing sharing, electrification, intelligence, etc., symbolizing WM Motor's vehicle manufacturing philosophy. 2. WM Motor's first mass-produced vehicle, the EX5, is a pure electric SUV priced around 200,000 RMB. It is reported that the new car is expected to roll off the production line in early 2018, debut at the Beijing Auto Show in April, and then enter the market phase in the second and third quarters. According to WM Motor's product plan, the company will extend "STD" and "PL" two vehicle platforms based on one core architecture in the future. Starting from 2018, WM Motor will launch at least eight new intelligent electric vehicles at a pace of at least one model per year.
20
5
Share

What is the fuel consumption per 100 kilometers of the Liexing 125?

The fuel consumption per 100 kilometers of the Liexing 125 motorcycle is 2.5 liters. The fuel consumption of a motorcycle is not only related to the motorcycle itself but also to the driver's driving habits and road conditions. If you want your motorcycle to be fuel-efficient, you need to change your driving habits and drive on relatively smooth roads. The reasons for the increasing fuel consumption of the vehicle are as follows: 1. The impact of temperature on fuel consumption fluctuations: Generally, in winter when the temperature is low, fuel consumption tends to increase, almost comparable to the fuel consumption when using air conditioning in summer. This is because the engine dissipates more heat in low temperatures. 2. The vehicle has not been maintained for a long time: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing the resistance of various moving parts of the engine, requiring more energy to overcome the resistance, thus increasing fuel consumption. 3. The spark plugs need to be replaced: Spark plugs are often overlooked. Although they may still function, worn spark plugs can cause delayed ignition due to insufficient ignition energy, missing the optimal ignition timing.
7
3
Share

How Long Does It Take to Repair an Engine Oil Leak?

If the engine oil leak is caused by loose bolts, it can typically be fixed in about an hour. However, if the cause of the leak is complex or the affected area is unusual, the repair may take significantly longer. The exact time required depends on the specific cause, as there is no standard timeframe. Below are common causes of engine oil leaks: 1. Damaged oil pan: Since most vehicles have relatively low ground clearance, driving on rough or uneven terrain can easily result in the oil pan being damaged by scraping or impact from flying debris. As the container that holds engine oil, a damaged oil pan will immediately cause leaks (most oil pans today are made of aluminum alloy, though some are still constructed from stamped steel). 2. Loose or stripped drain plug: During routine maintenance or oil changes, if the technician fails to properly tighten or overtightens the drain plug, it can lead to oil leaks from the engine. 3. Excessive crankcase pressure: Overfilling the engine oil or a malfunction in the crankcase ventilation system can cause a buildup of gases in the crankcase, increasing internal pressure. This high pressure may force oil past seals, resulting in leaks.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.