Can Someone Else Take the Points for a Speeding Ticket Capturing My Face?

2 Answers
GabrielleDella
09/06/25 3:25am
Violations captured with facial recognition cannot have points deducted by someone else. The offending driver must use their own driver's license to handle the violation, especially for speeding, as high-definition surveillance photos are taken, and the driver's image must be verified on-site. Therefore, the violator must personally process the violation with their own license. Below is relevant information: Point Deduction by Proxy: When your own driver's license points are insufficient, someone else can take the points. Both the violator and the proxy must go to the DMV together, and the proxy must provide a written statement agreeing to the point deduction. However, note that a single vehicle can only be linked to 3 driver's licenses, and a single driver's license can only be linked to 3 vehicles. Exceeding this limit will trigger a system alert and the license will be locked. Required documents for processing point deductions are as follows: Original vehicle registration of the offending vehicle; Original ID of the person taking the points; Original driver's license of the person taking the points; The person taking the points must be present in person.
Was this review help?
2
4
Share
SanJuliet
09/18/25 3:25am
Let me put it straight: if your face is captured by the camera, you absolutely cannot ask someone else to take the penalty points for you. The system now uses advanced facial recognition technology—it scans and instantly confirms your identity, so the penalty will land squarely on you. I had a friend who tried to get a relative to take the blame, got caught, and ended up with even harsher penalties—totally not worth it. When driving, it's better to stay steady—keep your speed under control and within limits. Not only does it keep you safe, but it also saves you the headache of fines. Build good habits, like setting speed alerts on your navigation or driving in eco mode—it really saves a lot of trouble. The key is simple: don’t speed. Getting home safely is what matters most.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What Causes Vehicle Vibration at 120 km/h?

The causes of vehicle vibration at 120 km/h are: 1. Uneven brake disc surface with excessive radial runout; 2. Rim deformation; 3. Excessive high or low tire pressure; 4. Significant wheel alignment data deviation; 5. Abnormal tire wear; 6. Tire dynamic balance failure; 7. Damper failure; 8. Engine power failure. The solutions for vehicle vibration at 120 km/h are: 1. Inspect and adjust front wheel alignment angles and toe-in; 2. Perform wheel dynamic balance inspection; 3. Adjust tire pressure or replace tires; 4. Perform driveshaft dynamic balance inspection; 5. Choose high-quality engine oil; 6. Inspect engine ignition system.
8
5
Share

How Many Liters of Oil Does the Camry Transmission Need?

The amount of transmission oil required for a Camry depends on the oil change method: 1. Approximately 6 liters for conventional gravity oil change; 2. Around 12 liters for machine exchange oil change. The Camry is a mid-size sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60 liters, and trunk capacity 593 liters. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 131kW at 6600rpm and peak torque of 210Nm between 4400-5200rpm, paired with a 10-speed continuously variable transmission.
4
1
Share

How to Determine if a Solenoid Valve is Damaged?

Determining whether a solenoid valve is damaged can be done through the following methods: 1. After energizing the coil, insert a metal tool directly into the coil hole and check if the metal tool can be attracted; 2. Measure the resistance of the coil with a multimeter. If the resistance shows infinity or is very small, it can be determined that the valve is damaged. A solenoid valve is an electromagnetically controlled industrial device used as an automated basic component for controlling fluids. It belongs to the category of actuators and can work with different circuits to achieve the desired control, ensuring precision and flexibility. Solenoid valves can be classified into: 1. Direct-acting solenoid valves; 2. Step-by-step direct-acting solenoid valves; 3. Pilot-operated solenoid valves.
5
5
Share

What Does Tire Size Represent?

Tire size represents the section width and the aspect ratio as a percentage, followed by the tire type code, rim diameter, load index, and speed rating. Taking 175/70R14 77H as an example, 175 indicates the tire width is 175mm, 70 means the tire's aspect ratio is 70%, the rim diameter is 14 inches, the load index is 77, and the speed rating is H. The method to measure tire size is: 1. Use a metal tape measure to wrap around the tire along the centerline of the tread or the highest point near the centerline to measure the outer circumference; 2. Select a sidewall area without markings, decorative lines, or scuff guards, and use a vernier caliper or calipers to measure the section width at approximately four equally spaced points around the tire; 3. Calculate the data accordingly.
7
2
Share

What is the situation with the car tire pressure warning?

Car tire pressure warning occurs due to the following reasons: 1. Air leakage from the tire or valve; 2. Wheel hub deformation leading to reduced tire sealing performance; 3. Long-term overloading of the vehicle causing uneven tire stress; 4. Thermal expansion and contraction resulting in insufficient tire pressure. Tire pressure refers to the air pressure inside the tire, with a normal monitoring range between 2.2 and 2.5 bar. Methods for monitoring tire pressure include: 1. Direct tire pressure monitoring; 2. Indirect tire pressure monitoring; 3. Using a smart tire monitoring system for detection. The impacts of low tire pressure are: 1. Increased contact area between the tire and the ground, leading to abnormal tire temperature; 2. Severe deformation of the tire sidewall, accelerating the aging of internal steel wires and fabric layers, which may cause a blowout; 3. Increased fuel consumption; 4. Reduced tire lifespan.
9
1
Share

What are the normal high and low pressures for a car air conditioner?

The normal high pressure for a car air conditioner is between 15 to 18 bar, and the low pressure is between 1.0 to 2.5 bar. Solutions for excessively high pressure in the car air conditioner include: 1. Clean the dust and dirt from the air vents and the interior of the cabin; 2. Regularly check the refrigerant level in the air conditioning system to ensure it is normal; 3. Inspect the compressor belt for proper condition; 4. Check if the refrigerant level is sufficient and replenish it in time. Solutions for excessively low pressure in the car air conditioner include: 1. Refill the air conditioning refrigerant according to the manufacturer's standards; 2. Inspect and repair any leaks in the air conditioning system, replacing any leaking components.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.