Can Someone Else Handle the Driver's License Inspection for Me?

1 Answers
StValentina
07/29/25 9:20pm
Driver's license inspection cannot be handled by someone else. Inspection Time: Drivers holding a driver's license should apply for a replacement of the motor vehicle driver's license and undergo inspection within 90 days before the expiration of the current license. Inspection Conditions: The applicant's demerit points in the current scoring cycle must not reach 12 points; the applicant must have no outstanding road traffic safety violations; the applicant's physical condition must meet the driving permit requirements; the motor vehicle driver's license must not be detained, suspended, revoked, canceled, or annulled by law. During the annual inspection, the applicant must fill out the "Motor Vehicle Driver's License Application Form" as required and provide the original motor vehicle driver's license along with three photos of the driver. Additionally, an original "Motor Vehicle Driver's Physical Condition Certificate" issued by a county-level or higher medical institution designated by the health bureau or a regiment-level or higher medical institution designated by the military or armed police forces is required. Inspection Content: Physical condition status. Road traffic safety violations and accident handling status. Road traffic safety violation demerit points and participation in study and examination after accumulating 12 points.
Was this review help?
7
0
Share
More Forum Discussions

What are the process benchmarks in vehicle manufacturing?

Vehicle manufacturing consists of four major processes: stamping, welding, painting, and final assembly. 1. Stamping: Sheet metal parts are pressed into shape using molds according to design requirements. 2. Welding: Various sheet metal parts are welded together to form the vehicle body-in-white as per design specifications. 3. Painting: The body-in-white undergoes pretreatment, primer coating, and topcoat painting. 4. Final assembly: All interior and exterior components, including the engine, are installed onto the body, resulting in the complete vehicle as seen. After passing various quality inspections, the vehicle is considered finished. Additional information: Stamping plays a crucial role in automotive body manufacturing, especially for large body panels. These components often feature complex shapes, large structural dimensions, sometimes with spatial curvature, and require high surface quality. Stamping proves unparalleled compared to other manufacturing methods for producing such parts.
17
3
Share

Where is the massage button for the Audi S5 seat?

Audi S5 seat massage button is located inside the driver's seat, with a seat icon on the button. The massage seat can better protect the cervical spine of the driver and passengers, promote blood circulation, relieve driver fatigue, help the driver relax, reduce travel fatigue, and allow the driver to get adequate rest. The Audi S5 body dimensions are: length 4762 mm, width 1843 mm, height 1342 mm, and wheelbase 2831 mm. The Audi S5 is equipped with a 3.0T turbocharged V6 engine, with a maximum power of 260 kW and a maximum power speed of 5400 to 6400 rpm, matched with an 8-speed automatic manual transmission.
9
5
Share

What License Plate Does a Motorcycle Belong To?

Motorcycles generally use yellow license plates for those with an engine displacement above 50cc, while blue license plates are for lightweight motorcycles with an engine displacement below 50cc. Pre-departure checks: Inspect the motorcycle's condition, ensuring the headlights, turn signals, horn, handlebars, etc., are functioning properly. Attire and protective gear: Helmets are legally required protective equipment, and it's advisable to wear brightly colored clothing. Traffic rules compliance: Avoid racing with cars; drive safely according to traffic laws and yield to pedestrians. Maintain a safe distance when following another vehicle, positioning yourself at the right rear corner of the vehicle ahead. When overtaking, pass from the left side of the vehicle in front; avoid overtaking from the right or between two parallel vehicles.
6
5
Share

What are the reasons for the bucket carburetor's inability to accelerate when pressing the throttle?

Possible causes include unstable idle speed; incorrect starting method; failure of the starting enrichment device; or damage to the gasket or O-ring connecting the carburetor to the engine intake manifold. Reasons for unstable idle speed: If the idle system's fuel or air passages in the carburetor are blocked or leaking, the idle fuel supply may become too lean or too rich, causing unstable engine idle. Solution for failed starting enrichment device: Clean the enrichment passage on the carburetor body using compressed air. Solution for damaged gasket or O-ring connecting the carburetor to the engine intake manifold: Simply replace the connecting gasket or O-ring.
11
3
Share

Where is the cabin air filter of Zotye T600 located?

The cabin air filter of Zotye T600 is located behind the glove box on the passenger side. The functions of the cabin air filter are: 1. To separate dust, powder, and grinding particles from the air; 2. To ensure clean air in the cabin and prevent bacterial growth. Taking the 2019 Zotye T600 as an example, its body dimensions are: length 4676mm, width 1893mm, height 1696mm, with a wheelbase of 2807mm and a fuel tank capacity of 60 liters. The 2019 Zotye T600 is equipped with a 1.5T turbocharged engine, with a maximum power of 105kW and a maximum torque of 207Nm, paired with a 6-speed automatic transmission.
9
5
Share

What is the order of the car pedals?

The three pedals from left to right are the clutch, brake, and accelerator. Related introduction about foot pedals: 1. Purpose: Foot pedals are not only a tool for accommodating feet but sometimes also serve as seating. For example, in the book "Dream of the Red Chamber" by the great literary figure Cao Xueqing from the mid-Qing Dynasty, this function of foot pedals is described. 2. Modern foot pedals: Also known as footstools, they are placed under the feet to prevent the legs from hanging in the air and were also a symbol of noble status in ancient times. Compared to traditional foot pedals, modern ones incorporate mechanical and ergonomic designs, allowing not only the adjustment of the height of the footrest but also the angle, making the legs more relaxed and comfortable. Well-known brands include dxracer, among others.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.