Can someone else handle new car registration for me?

1 Answers
Fernando
07/30/25 2:58am
New car registration can be handled by someone else, but relevant documents must be brought along. In some places, the vehicle management office requires that only intermediaries with proxy qualifications can handle the relevant procedures. Documents required for new car registration by proxy: original and photocopy of ID card (if acting on behalf of someone else, both the proxy's and the car owner's must be brought), original and photocopy of the invoice, original and photocopy of the vehicle qualification certificate, original and photocopy of the compulsory insurance policy (the copy will be retained), and the tax payment certificate (the copy will be retained). Obtaining the vehicle qualification certificate: The vehicle qualification certificate is very important. Currently, some car 4S stores delay handing over the vehicle qualification certificate, which can delay registration. Therefore, it is essential to obtain the vehicle qualification certificate as soon as possible. Communicate more with the 4S store and be firm in your approach. Keep the triplicate car purchase invoice: After purchasing the car, the 4S store will issue a triplicate car purchase invoice. Be sure to keep it safe, as it will be needed for subsequent registration. The invoice comes in red, yellow, and blue copies. Generally, the red and yellow copies must be submitted, while the yellow copy is kept by the buyer. Pay the vehicle purchase tax and obtain the tax certificate: After purchasing the car, go to pay the vehicle purchase tax as soon as possible. Generally, you can go to the nearest vehicle management office. After successfully paying the vehicle purchase tax, you will receive the original and duplicate tax certificates. Remember to keep them safe. Prepare various documents in advance: Prepare the original ID card and photocopies (make several copies for backup). Non-local residents must provide the original and photocopy of the temporary residence permit. (For companies, the original and photocopy of the organization code certificate are required.) Register and inspect the vehicle at the vehicle management office: Once all procedures are complete, you can go to the vehicle management office to register and apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, vehicle appearance, and warning triangle. Prepare these in advance. Choose the vehicle license plate number: After the vehicle inspection, you can go to the vehicle management office hall to select a license plate number. Generally, there are two options: self-selection or random selection. You can choose either. Pay the fee and wait for the license plate: After selecting the number, pay the fee and wait for the license plate. It usually takes three to five working days to receive the license plate.
Was this review help?
19
2
Share
More Forum Discussions

What kind of car is the Vitara?

Vitara is a compact SUV under the Suzuki brand, known as 'Vitara' in Chinese. The Vitara has a wheelbase of 2500 mm, with length, width, and height measuring 4175 mm, 1775 mm, and 1610 mm respectively. The Vitara is equipped with two engine options: a 1.4-liter turbocharged engine and a 1.6-liter naturally aspirated engine. The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 220 Nm, with peak power achieved at 5500 rpm and maximum torque available between 1700 to 4000 rpm. The 1.6-liter naturally aspirated engine produces 122 horsepower and a maximum torque of 158 Nm, reaching peak power at 6000 rpm and maximum torque at 4400 rpm.
18
4
Share

What is the tire size of the 2014 Sylphy?

The 2014 Sylphy comes with two tire size options: 205/60R16 and 215/50R17. The 2014 Sylphy is equipped with Michelin tires, which are designed for superior wet braking and quiet performance, minimizing road noise during driving to enhance cabin comfort. The 2014 Sylphy is a model launched by Dongfeng Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. The 2014 Sylphy adopts the brand's new VMotion 2.0 design language, benefiting from Nissan's global CMF platform with a longer and wider chassis structure, achieving a 1.254 luxury car width-to-height ratio and an ultra-low drag coefficient of 0.26Cd.
7
3
Share

What Causes the Reverse Radar to Beep?

The causes and solutions for reverse radar beeping are as follows: 1. Dirt or debris on the reverse radar probe blocks the signal. Solution: Check if there is anything obstructing the radar holes at the rear of the vehicle. 2. Leakage or seepage from the rear wiper water pipe into the reverse radar system. Solution: Seal the leakage point and drain any accumulated water in the radar system. 3. Errors in the radar's ultrasonic signal, causing false alarms. Solution: Restart the engine, move the vehicle to an open area, and attempt reversing again to observe the results. 4. Short circuit in the reverse radar wiring or a faulty radar module. Solution: Visit a 4S shop or repair facility for inspection, checking the wiring or replacing the radar module.
16
0
Share

What does TCS mean on a car?

TCS on a car stands for Traction Control System, also known as the Track Control System. When a car accelerates, TCS keeps the slippage within a certain range, preventing the drive wheels from spinning too quickly, thereby improving traction and maintaining the vehicle's driving stability. When driving on slippery roads, cars without TCS are prone to wheel spin during acceleration. If it's the rear wheels, this can cause the car to fishtail. TCS traction control system is controlled by a computer that monitors the speed of all four wheels and the steering wheel angle. During acceleration, if the computer detects an excessive speed difference between the drive wheels and non-drive wheels, it immediately determines that the driving force is too high and sends a signal to reduce the engine's fuel supply, thereby decreasing the driving force and reducing the drive wheels' slip rate. The computer uses the steering wheel angle sensor to understand the driver's steering intention and then detects the speed difference between the left and right wheels using wheel speed sensors. This helps determine whether the car's turning degree matches the driver's steering intention. If understeer (or oversteer) is detected, the computer immediately reduces the driving force to align with the driver's steering intention. The functions of TCS in a car: Traction control can be achieved by reducing the throttle opening to lower engine power or by controlling the brakes and wheel spin. Cars equipped with ASR (Anti-Slip Regulation) use a combination of these methods, known as ABS/ASR. TCS has two main functions: improving traction and maintaining driving stability. During turns, if the drive wheels spin, the entire vehicle may drift to one side. With ASR, the vehicle follows the correct turning path. In ASR-equipped cars, the mechanical connection between the accelerator pedal and the throttle (or diesel injection pump lever) is replaced by an electronic throttle control. Compared to other traction control systems, ESP (Electronic Stability Program) not only controls the drive wheels but also the non-drive wheels. For example, in rear-wheel-drive cars prone to oversteer, where the rear wheels lose control and fishtail, ESP will brake the outer front wheel to stabilize the car. In cases of understeer, ESP brakes the inner rear wheel to correct the driving direction. Methods TCS uses to control wheel spin: When drive wheels spin, the braking system increases the brake fluid pressure on the slipping wheel and applies appropriate braking to limit the spin. In addition to using the braking system, TCS also controls engine output by delaying ignition timing, reducing fuel injection, or adjusting throttle opening to decrease the driving force on the drive wheels and prevent spin.
2
0
Share

How to disassemble the center console of Kia K5?

Disassembly tutorial for the Kia K5 center console: Use a trim removal tool to pry open the frame below the original car navigation, remove the frame, unscrew the fixing screws on both sides of the original car navigation, then remove the screws inside the middle of the original car navigation. After all screws are removed, take out the original car navigation and unplug the wiring behind it. The Kia K5 is a mid-size car launched by Dongfeng Yueda Kia Motors, with body dimensions of 4845mm in length, 1830mm in width, and 1460mm in height, and a wheelbase of 2795mm. In terms of power, this car offers two powertrain options, equipped with a 2.0L naturally aspirated engine and a 1.6T turbocharged engine respectively.
19
1
Share

Where is the Engine Auto Start-Stop Switch Located?

The engine start-stop switch is typically an A OFF button, located either near the lower left side of the gear shift lever or next to the ignition switch. When this button is illuminated, it indicates that the engine auto start-stop system is deactivated. The engine auto start-stop system is designed to automatically shut off the engine when the vehicle comes to a temporary stop during driving and restart it when it's time to move forward again. The core function of auto start-stop is to automatically control engine shutdown and restart, allowing the vehicle to temporarily turn off the engine during brief stops, thereby reducing unnecessary fuel consumption. Utilizing the auto start-stop feature can significantly help in reducing exhaust emissions.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.