Can Someone Drive an Automatic Car for the First Time Without Prior Experience?

1 Answers
VanLilliana
07/30/25 5:39am
It is possible for someone to drive an automatic car for the first time under guidance. You can start the car by placing the gear in N (Neutral) or P (Park), and drive with an experienced driver accompanying you from 58 Auto. Below are some key points to note: Starting the Car: Place the gear in N or P to start the car. After starting the engine, wait a few seconds before shifting gears to allow the transmission to be fully lubricated. Press the brake pedal, shift to the correct gear, release the brake, and the car will start normally. While Driving: When driving on the road, place the gear lever in D (Drive) and gradually increase the throttle. On short or small slopes, place the lever in D or L (Low) and control the throttle to complete the ascent. Driving in Snow: When driving downhill, use D gear along with the brake to control the vehicle. In snowy conditions, place the lever in L gear to start, preventing the drive wheels from slipping. Once the car is moving, shift to D gear.
Was this review help?
9
3
Share
More Forum Discussions

Why does the car windshield frost on the outside when the air conditioning is on in summer?

In summer, the car windshield frosts on the outside because the hot air outside the window meets the cold air inside the car, causing the glass to frost. Here are some methods to defog the car windows: 1. Spray anti-fog agent: Spray a small amount of defogging agent on the car window and wipe it clean to remove dirt and stains on the glass. While polishing the glass, a thin transparent protective film is formed on the glass, which can effectively prevent the formation of fog caused by condensation of water vapor on the glass. 2. Air conditioning cooling: Use the air conditioning's cooling and dehumidification function to reduce air humidity and remove fog. In summer, especially when many people enter the car and do not turn on the air conditioning in time, the humidity of the exhaled air is high, and the front windshield will quickly fog up. At this time, you can turn on the air conditioning to blow cold air towards the front windshield, using the air conditioning's dehumidification function, and the fog on the front windshield can be removed quickly.
9
4
Share

How fast can you drive in a 50 km/h speed limit zone?

Speed limit 50 means you can drive up to 50 km/h. Relevant information about highway speed limits is as follows: 1. Maximum speed: Highways should indicate the driving speed of lanes, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. On highways, the maximum speed for small passenger vehicles should not exceed 120 km/h, other motor vehicles should not exceed 100 km/h, and motorcycles should not exceed 80 km/h. 2. Minimum speed: According to the "Regulations for the Implementation of the Road Traffic Safety Law", if there are 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h; if there are 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. If the speed indicated by road speed limit signs is inconsistent with the above lane driving speed regulations, the speed indicated by the road speed limit signs shall be followed.
3
1
Share

Is the photo for driver's license registration the same as the one on the driver's license?

The photo taken during the driver's license registration process is the same one that will appear on the driver's license. Here are the specific details about the driver's license photo: 1. Photo shooting: The photo on the driver's license is taken by a photography studio designated by the vehicle management office, following the requirements for driver's license photos. After taking the photo as required, the applicant submits it to the driving school where they are learning. This photo will be the one that appears on the driver's license. 2. Requirements for the driver's license photo: The background color should be white, no uniforms should be worn, the portrait should be clear, with rich layers, a natural expression, and no obvious distortion. The photo size should be 32mm*22mm, with the head width between 14mm~16mm and the head length between 19mm~22mm.
14
2
Share

How to Pay for the Subject 2 Retake Fee on 12123?

Subject 2 retake fee can be paid by the coach on behalf of the student or paid personally at the examination site. Currently, the 12123 platform only allows scheduling exams or checking scores, and does not support paying the Subject 2 retake fee. Below is an introduction to Subject 2: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small cars C1 and C2, the test items include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves). Some regions also include a sixth item: high-speed card collection. 2. Teaching Objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and road driving, possess the ability to reasonably use vehicle control components and correctly control the vehicle's spatial position, and accurately control the vehicle's driving position, speed, and route.
6
4
Share

What are the hazards of depressing the clutch in neutral gear?

Depressing the clutch in neutral gear can affect the service life of the clutch release bearing. The following is relevant information about the clutch release bearing: 1. Overview: The clutch release bearing is a relatively important component in a car. If it is not properly maintained and malfunctions, it will not only cause economic losses but also be quite troublesome to disassemble and reassemble, requiring a lot of man-hours. Therefore, understanding the causes of clutch release bearing failures and performing reasonable maintenance and care during use are of great significance for extending the life of the release bearing, improving labor productivity, and achieving better economic benefits. 2. Function: The clutch release bearing is installed between the clutch and the transmission. The release bearing housing is loosely fitted on the tubular extension of the transmission's first shaft bearing cover. A return spring ensures that the shoulder of the release bearing always presses against the release fork and retracts to the rearmost position, maintaining a gap of about 3-4mm with the end of the release lever (release finger).
1
3
Share

Is the license number the same after reissuing the vehicle license?

The license number remains the same after reissuing the vehicle license. The vehicle license number refers to the digital number printed in the 'File Number' column on the motor vehicle license, usually a 12-digit serial code for easy query of traffic violation records. It is generally located on the upper right side of the third line on the back page of the license. Here is some information about the vehicle license: 1. Definition: The motor vehicle license is the legal document permitting the vehicle to drive on roads within China. 2. Composition: The vehicle license consists of three parts: the document, the main page, and the back page. The front side of the main page is the signed core of the document, while the back side is a photo of the vehicle sealed in plastic. The back page is the signed core of the document. 3. Function: The vehicle license verification system can verify the authenticity of the motor vehicle, query vehicle information, and provide travel security. By simply entering the basic information of the vehicle in the system, the authenticity of the vehicle can be verified.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.