···
Log in / Register

Can Small Flatbed Trucks Drive on Highways?

3 Answers
RuthFitz
07/24/25 8:29pm
Small flatbed trucks can drive on highways. Vehicles allowed on highways: Motor vehicles designed with a speed higher than 70 kilometers per hour are permitted to enter highways. In real life, each province has formulated additional regulations, measures, and other rules based on the actual conditions of their highways. For example, some provinces allow motorcycles on highways, while others do not. Vehicles not allowed on highways: Article 67 of the Traffic Safety Law: Pedestrians, non-motor vehicles, tractors, wheeled special-purpose machinery vehicles, articulated buses, full trailers, and other motor vehicles designed with a maximum speed lower than seventy kilometers per hour are not allowed to enter highways.
Was this review help?
5
4
Share
DiBrady
08/10/25 9:24am
A friend of mine once tried to take a small electric scooter onto the highway, but was stopped by traffic police before even reaching the entrance. The reason given was that such vehicles are too slow, with a maximum speed of only 25 km/h, while the minimum speed limit on highways is typically 60 km/h. Riding one on the highway is like a snail crossing the road—cars coming at high speed from behind wouldn’t have enough time to react, posing a high risk of accidents. Additionally, scooters lack any protective features, making riders prone to slipping or falling in windy, rainy, or wet road conditions, which could lead to accidents. From a traffic safety perspective, I firmly believe in following the rules: these vehicles should only be ridden in urban slow lanes, leaving highways to proper cars. I recommend using such mobility tools only in safe urban areas.
Was this review help?
13
0
Share
Expand All
Leonard
09/26/25 4:48am
Last time I checked the traffic regulations, I learned that small flat vehicles like electric scooters are not allowed on highways. Many places prohibit non-motorized vehicles with speeds below 25 km/h from entering highways, including flat vehicles, as they do not meet road safety standards, such as lacking brake lights and turn signals. On highways, with fast speeds and dense traffic, getting caught driving illegally can result in fines and even demerit points. I've seen cases where owners were educated and had to have their vehicles towed. It's much better to ride in the city; highway conditions are too dangerous. I remind new riders to familiarize themselves with local traffic laws to avoid trouble.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

What to Do When the Mercedes-Benz AC Blows Hot Air Instead of Cold?

There is a switch for hot air in the car, usually indicated by red and blue colors. The red side is for warm air. Turn it to the red side and then turn on the fan switch. First, start the engine to warm it up. Wait until the engine temperature needle reaches the middle position, then turn on the heating AC and set the air circulation to external circulation.
8
2
Share

How to Replace the Roof Lining of a 2010 Octavia?

First, remove components such as the sun visors, dome light, and handles. Clean the roof lining thoroughly, organize all the wiring, flatten the front seats, and pull the roof lining out from the rear door. Make holes in the fabric, apply adhesive, and after it has firmly set, reinstall the removed components.
7
2
Share

What Gear Should an Automatic Transmission Car Be in When Warming Up?

It is safer to warm up an automatic transmission car in P (Park) gear as this locks the tires. Warming up in N (Neutral) gear may cause the car to roll if the ground is uneven, even with the handbrake engaged. Below is an introduction to the gears of an automatic transmission car: 1. P (Parking): Engaging P gear after the car stops prevents movement through braking. Some models now feature an independent P gear, referred to as electronic braking. 2. R (Reverse): This gear can only be engaged when the vehicle is stationary for reversing. Models with a lock button require pressing the button to switch. 3. N (Neutral): Use this gear for temporary stops, such as at traffic lights, and always engage the handbrake. 4. S (Sport): The difference between D and S gears is simply the computer switching to different shifting programs, so S gear can be engaged at any time without adverse effects like damaging the transmission. 5. D (Drive): The most commonly used gear for driving forward, where gear changes are controlled by the accelerator. D1 (or L gear), D2, and D3 correspond to manual transmission gears 1 and 2, 3 and 4, and 5 and 6, respectively.
19
1
Share

What are the starting procedures for the BYD Han?

In the event of an emergency while the vehicle is in motion, the engine can be shut off by pressing the engine start/stop button for more than 3 seconds or by pressing it three times consecutively. If the engine stalls while the vehicle is in motion, shift the gear lever to the N (Neutral) position and press the engine start/stop button to restart the engine.
4
2
Share

What to Do When Honda Car CAN Communication Fails?

Check which module is unable to communicate. Read the fault codes of the body module, ABS module, and airbag module separately. Then measure the resistance between pins 6 and 14 of the diagnostic socket to see if it is 60 ohms or 120 ohms. A reading of 120 ohms indicates a damaged module.
19
3
Share

How to Use the Cruise Control on MG6?

The cruise control of MG6 is operated via the stalk switch located at the lower left side of the steering wheel. When the cruise control system is in standby mode, press the "Set" button at the end of the stalk switch, and the indicator light on the instrument panel will turn green, indicating the cruise system is activated. Relevant instructions are as follows: 1. The MG6 cruise control is operated through the stalk switch on the lower left side of the steering wheel. To adjust the target cruising speed, push the stalk switch upward and hold it, and the vehicle will accelerate automatically. Release the switch immediately when the desired speed is reached; pushing the stalk switch downward will decelerate the vehicle. Additionally, you can gradually increase or decrease the set speed by flicking the stalk switch and releasing it immediately. Each flick of the stalk switch will increase or decrease the speed by approximately 1 km/h. While the cruise control system is active, pressing the accelerator pedal normally can still accelerate the vehicle. Upon releasing the accelerator pedal, the speed will return to the set cruising speed. 2. The cruise system will automatically exit to standby mode under the following conditions: the stalk switch is moved to the "Cancel" position; the brake pedal is pressed; the gear of an automatic transmission model is shifted to P, R, or N; poor road conditions trigger the dynamic stability control system for safety reasons; or when the slope is too steep, causing excessive speed reduction, the cruise system will also pause automatically.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.