Can Self-Driving Cars Go to the Hong Kong-Zhuhai-Macao Bridge?

1 Answers
RebeccaRose
07/30/25 6:58am
Self-driving tours are allowed. Apart from five types of vehicles—cross-border buses, shuttle buses, cross-border taxis, cross-border freight vehicles, and cross-border private cars—that are permitted to travel on the Hong Kong-Zhuhai-Macao Bridge, other vehicles that do not meet the requirements are not allowed on the bridge. Below is more information about self-driving tours on the Hong Kong-Zhuhai-Macao Bridge: 1. Important Notes: To pass through the Hong Kong-Zhuhai-Macao Bridge, you must carry your ID card and Hong Kong-Macao travel permit. The process follows a "three-region, three-check" model, with the three ports managed separately by the governments of Hong Kong, Macao, and Zhuhai. If you are on a self-driving tour, the driver can continue driving the vehicle through the checkpoint, while other passengers in the car need to disembark and undergo inspection at the "inspection hall." 2. Driving Rules: Macao follows left-hand traffic, while mainland China follows right-hand traffic. However, the Hong Kong-Zhuhai-Macao Bridge adopts right-hand traffic rules, the same as mainland China. Nevertheless, upon reaching the Hong Kong or Macao ports, vehicles must switch between left-hand and right-hand traffic.
Was this review help?
17
0
Share
More Forum Discussions

How to Turn on the Car Heater in Winter?

Here’s how to turn on the car heater in winter: 1. Start the engine for preheating, and turn on the heating when the temperature gauge reaches the middle. 2. Set the air circulation to external circulation to let the cold air inside the car escape. After 2-3 minutes, switch the air circulation to internal circulation. Precautions for using the car heater in winter: 1. In the long-term internal circulation mode of the heater, the air inside the car is not fresh, especially since the car space is limited. Therefore, it’s essential to open the windows periodically for ventilation. 2. Professionals recommend slightly opening the windows when using the heater to allow some air circulation. Enabling the convection mode can prevent dryness inside the car and improve air quality. 3. When driving, avoid directing the heater vents toward yourself, as this can dry out your skin. Additionally, bacteria in the air ducts may be blown directly at you, potentially affecting your health when inhaled.
17
3
Share

What is the solution for panoramic sunroof noise?

Panoramic sunroof noise is caused by loose fixing screws of the sunroof, which leads to vibration and collision between two parts, resulting in abnormal noise. In this case, the fixing screws need to be tightened. Here is an introduction to panoramic sunroofs: 1. Classification: According to the opening form, they are divided into closed type, segmented opening type, and overall opening type. 2. Advantages: First, due to the large area of the sunroof, compared with ordinary cars, it can better maintain fresh air in the car and quickly remove odors. Second, when driving at high speed, it can more effectively reduce interior noise compared to side windows. 3. Disadvantages: High manufacturing cost, and higher requirements for the body structure, precision of stamping parts, and body manufacturing process.
6
4
Share

How to turn off the rear wiper on Qoros 5?

To turn off the rear wiper on the Qoros 5, mainly follow these steps: Return the lever on the right side of the steering wheel to its initial position, and the rear wiper will turn off. The initial position refers to adjusting the lever up and down to the middle position, which is the initial position, then turn the knob at the top of the lever to OFF. For the Qoros 5's rear wiper, pushing the lever forward activates the front wiper spray, while pulling it backward activates the rear wiper spray. Additional information: 1. The key to the wiper functioning well is keeping the rubber wiper blade sufficiently moist. 2. Only with sufficient moisture can it maintain excellent flexibility and ensure tight contact with the windshield.
12
0
Share

What does 'push' mean in a car?

In a car, 'push' means to press. In automotive terminology, it has three meanings: 1. Airflow (also called mode). Press the PUSH button in the center of the gear knob to turn on the rear window defrost when the light is on; 2. Temperature (also called warm/cold). Press the PUSH button in the center of the gear knob to turn on the internal circulation when the light is on; 3. Handbrake. More information about the car handbrake is as follows: 1. The professional term for the handbrake is the auxiliary brake. Unlike the principle of the main brake, it uses a steel cable connected to the rear brake shoes to brake the car. 2. Long-term use of the handbrake will cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use will reduce its effectiveness, and the handbrake's travel will also increase.
3
5
Share

How to Lift the Wiper on a Volkswagen?

Turn off the engine, and within 10 seconds, activate the windshield washer switch. The wiper will automatically move to the center of the windshield. Then, hold the wiper's fixed bracket and lift it up. When resetting, grasp the spine of the wiper blade and gently place it back, avoiding snapping it back abruptly. More details are as follows: 1. The wiper assembly includes a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The wiper is a device used to remove raindrops and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all vehicles worldwide are equipped with wipers. 2. The power of the wiper comes from the motor, which is the core of the wiper system. Proper use and maintenance of the front wiper are crucial for the motor's longevity. 3. When the rain stops, do not immediately turn off the wiper. Since the windshield may be splattered with mud from the vehicle ahead, turning it on again would only spread the mud. 4. Every night when parking, make sure to clean the front windshield thoroughly. Developing this habit greatly benefits the wiper's performance.
5
4
Share

How to Turn on One-Button Start?

Method to turn on one-button start: Simply press the one-button start key to activate it. Here is an introduction to the car's one-button start feature: 1. Introduction: The one-button start device is part of a smart car, serving as a button mechanism that simplifies the starting process and can also shut off the engine. This device can be retrofitted at the original car key lock position or installed as an independent panel. 2. Starting Methods: Includes keyless remote start and remote-controlled start, among others. Keyless remote start involves placing the remote near the induction coil attached to the glass to unlock and start the car normally. Remote-controlled start allows the car to be started silently in anti-theft mode by long-pressing the mute button; the engine will automatically shut off after 15 minutes if no operation is performed.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.