Can Red Antifreeze and Green Antifreeze Be Mixed?

1 Answers
McMia
07/29/25 2:27pm
Green antifreeze and red antifreeze should not be mixed. Antifreeze of different colors may have variations in chemical properties and compositions. Even if the primary ingredients are the same, the secondary components and formulation ratios can differ. Mixing them can lead to chemical reactions, causing hazards such as sedimentation, scaling, and corrosion, which may affect the engine's lifespan. How to choose antifreeze: The basic indicators for antifreeze are its freezing and boiling points. Market-available antifreeze comes in specifications such as -15°C, -25°C, -30°C, and -40°C freezing points. It is generally advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. How to determine if antifreeze is low: Check the antifreeze warning light on the dashboard. If it lights up, it likely indicates low antifreeze levels, though it could also be due to excessively high engine temperatures. Inspect the antifreeze reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add antifreeze promptly. Check the water level markings on the antifreeze tank. The normal antifreeze level should be between the maximum and minimum marks. If the antifreeze is below the minimum mark, it indicates a deficiency.
Was this review help?
6
5
Share
More Forum Discussions

Is It Necessary to Buy an MPV?

It is recommended to buy an MPV, but the decision should still be based on individual circumstances and usage. Introduction to MPV: MPV (Multi-Purpose Vehicles) is a multi-purpose vehicle evolved from station wagons. It combines the spacious passenger space of a station wagon, the comfort of a sedan, and the functionality of a van, typically featuring a two-box structure and seating for 7-8 people. Target Users of MPV: It is primarily designed for family users, offering more space than sedans of the same displacement, and comes in various sizes and specifications. Features of MPV: MPVs generally adopt a sedan chassis, with the engine layout breaking the traditional van design where the engine is placed inside the cabin. Instead, the engine is transversely mounted in the front, which helps absorb frontal impacts and enhances the safety of front-seat passengers.
16
1
Share

How many points are deducted for driving in the wrong direction on an elevated road?

Driving in the wrong direction on an elevated road will result in a deduction of 3 points and a warning or fine. The party concerned shall pay the fine at the designated bank within fifteen days from the date of receiving the administrative penalty decision for the fine. For fines imposed on pedestrians, passengers, and non-motor vehicle drivers, if the party concerned has no objection, the fine may be collected on the spot. The fine shall be issued with a unified fine receipt issued by the finance department of the province, autonomous region, or municipality directly under the central government. If the unified fine receipt issued by the finance department is not provided, the party concerned has the right to refuse to pay the fine. Motor vehicle drivers who commit any of the following violations will be penalized with a deduction of 3 points: Driving a motor vehicle in violation of prohibition signs or prohibited line markings, driving a motor vehicle without overtaking, yielding, or driving in the wrong direction as required, driving a motor vehicle in violation of regulations when towing a trailer, failing to use lights and set up warning signs as required after a vehicle breaks down or is involved in an accident on the road, and driving a motor vehicle on the road without undergoing regular safety technical inspections as required.
14
5
Share

What is the equivalent car engine displacement for a 900cc motorcycle?

A 900cc motorcycle is approximately equivalent to a 1.0L car engine displacement. Ultra-light displacement: Below 100cc, including 50-90cc, such as 50, 70, 80, 90, etc. Light displacement: Small displacement 100-150cc, including 100, 110, 125, 150, etc. Medium-small displacement: 200-400cc, including 200, 250, 300, 400, etc. Large displacement: 500-900cc, including 500, 600, 750, 900, etc. Super-large displacement: Above 1000cc, such as 1000, 1100, 1250, 1300, etc.
13
0
Share

What temperature is generally considered too high for an engine?

Engine overheating generally refers to temperatures above 105 degrees Celsius. Lack of coolant: Insufficient or inappropriate coolant cannot effectively dissipate the heat generated by engine components, leading to excessively high water temperature. Cooling system malfunction: Blockages in the radiator guard mesh or core ventilation passages by debris can result in poor heat dissipation. A faulty cooling fan may also prevent timely heat transfer to the antifreeze during high-speed operation, causing the antifreeze temperature to rise and leading to issues like boiling over. Thermostat malfunction: If the thermostat is not functioning properly, it can cause the engine to overheat. This can usually be diagnosed by checking the temperature difference between the small hoses connected to the thermostat. A significant temperature difference between the two hoses indicates a faulty thermostat. In such cases, it is advisable to seek professional maintenance services for inspection and repair.
20
5
Share

What Causes the Brake Noise on the Leoncino 500?

The brake noise on the Leoncino 500 may be caused by oil contamination on the brake pads or severe wear of the brake blocks. Below are the detailed explanations of the causes and solutions: Oil contamination on the brake pads: Brake pads are generally composed of steel plates, adhesive insulation layers, and friction blocks. Their material is prone to oil contamination. During braking, if the brake shoes slip against the brake drum due to oil contamination, it can produce a sharp, piercing sound. The brake pads can be removed and cleaned with alcohol to wash the brake drum and brake shoes, removing the oil contamination. To further increase the friction of the brake pads, you can sand the surface of the brake pads with sandpaper, which not only eliminates brake noise but also enhances braking friction, improving braking performance. Severe wear of the brake blocks: If you need to apply more force to brake and the process is accompanied by abnormal noise, it may indicate severe wear of the brake blocks. It is advisable to visit an after-sales service or repair shop as soon as possible for inspection and replacement of the brake blocks. Continuing to use them could lead to dangerous situations.
16
0
Share

What does it mean when the side airbag for occupants is turned off?

The side airbag for occupants being turned off means that the side airbag automatically deactivates when it cannot detect a person on the seat. If you sit in the passenger or driver's seat with an incorrect posture, the side airbag may not detect your presence within its effective range, causing it to automatically deactivate. Try adjusting your sitting position. The electronic control of the airbag system is a passive safety protection system. When used in conjunction with seat belts, it provides effective collision protection for passengers. In the event of a car collision, the airbag can reduce head injury rates by 25% and facial injury rates by approximately 80%.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.