Can rain visors block rain?

2 Answers
MilaFitz
07/29/25 3:16am
Yes. 1. Function of rearview mirror rain visors: Designed for rainy weather, they can promptly remove rainwater and other debris from the rearview mirrors, ensuring safe driving. 2. Protection for drivers: When the car window is open, the rain visors prevent outside airflow from easily blowing onto the faces of passengers and drivers. Rearview mirror rain visors are not only useful during rainy weather but also on sunny days. For example, they can provide shade in hot weather, avoiding direct sunlight exposure.
Was this review help?
11
1
Share
DiReed
08/12/25 7:08am
I think rain guards are indeed effective at blocking rain because I've installed them and found them quite practical. During rain, they allow the car window to be slightly opened without letting rainwater directly pour into the car, which is especially useful while driving. For example, on a rainy morning, I can crack the window for ventilation, improving air circulation inside without causing fogging that obstructs visibility. Installation is also simple—most are adhesive-backed, and I managed to install them myself in just a few minutes. However, in heavy rain, a few droplets might still drift in, but overall, the effect is good. I recommend choosing dark-colored materials to minimize light interference while driving. Maintenance is easy—just wipe them clean when dirty. At high speeds, there might be occasional wind noise, but it's not severe. In summary, rain guards make driving more comfortable in wet weather, solving a big problem with a small accessory.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What is the reason for the dim headlights of Qin Pro?

The reason for the dim headlights of Qin Pro is that the outer shell of the headlights, after prolonged exposure to wind and sun, can be gradually corroded and scratched by dust and impurities in the air, resulting in a difficult-to-clean yellow stain that causes the headlights to appear dull and hazy. Methods to clean the headlights: 1. Soapy water is a weakly alkaline substance, non-corrosive, gentle in nature, and has strong cleaning power. Simply apply the prepared soap solution to the surface of the headlights, wait for about ten minutes, and then repeatedly wipe with a sponge to remove stains, also providing a certain polishing effect. 2. Use a soft cloth to wipe the surface of the headlights, which can prevent the formation of stains and maintain the brightness of the headlights. During the wiping process, avoid using rough cloths or applying excessive force, as the headlight shell can be scratched. Once scratches appear, stains can get trapped inside, making them difficult to clean.
3
2
Share

What is the ground clearance of the Tiguan?

The ground clearance of the Tiguan is: 1. 160mm for the two-wheel drive version; 2. 180mm for the four-wheel drive version. The Volkswagen Tiguan is equipped with a steel engine underguard, which feels quite sturdy when tapped by hand and can withstand minor underbody impacts. The front section of the chassis is relatively flat, and the underguard helps prevent the engine from scraping against the ground on unpaved roads. The Tiguan is a compact 5-door, 5-seat SUV, featuring a 6-speed automatic transmission with manual mode and a turbocharged engine. It has a MacPherson strut front suspension and a multi-link independent rear suspension. The vehicle dimensions are 4506mm in length, 1809mm in width, and 1685mm in height.
13
4
Share

Reasons for Excessive Engine Oil Pressure?

Reasons for excessive engine oil pressure include: 1. Low oil viscosity; 2. Clogged oil pickup screen or oil filter element; 3. Weakened or broken pressure relief valve or return valve spring, leading to poor valve sealing; 4. Excessive clearance in main bearings or connecting rod bearings; 5. Poor oil pump performance. Methods for checking engine oil pressure: 1. Inspect the oil pressure gauge and sensor, replacing them if malfunctioning; 2. Verify oil viscosity meets specifications, replacing with appropriate viscosity oil if too high; 3. Adjust the pressure relief valve to ensure oil pressure meets requirements; 4. Regularly clean oil lines, passages, and maintain the filter.
20
2
Share

Why Doesn't the Car Alternator Generate Electricity?

Car alternator not generating electricity may be caused by: 1. Broken or slipping alternator belt; 2. Open circuit in alternator output wiring; 3. Rotor part jammed; 4. Damaged winding. The function of car alternator is: to supply power to all electrical equipment and charge the battery when the engine is running normally. Solutions for car alternator not generating electricity: 1. Secure adjustment device or replace belt; 2. Check wiring condition, repair if open circuit exists; 3. Tighten rotor part; 4. Measure coil resistance with multimeter, rewind coil or replace motor if no resistance value.
10
5
Share

How to Reset the Maintenance Reminder on a Lavida?

The method to reset the maintenance reminder on a Lavida is: 1. Remove the key to turn off the dashboard lights; 2. Press and hold the maintenance reset button; 3. Turn on the key and wait until the maintenance cycle indicator displays normally; 4. Turn off the key and then turn it on again to test if the reset is successful. If not, repeat the above steps. Taking the 2011 Lavida 1.4TSI Manual Elegance Edition as an example: the vehicle has a length of 4605mm, width of 1765mm, height of 1460mm, a wheelbase of 2610mm, braking system with front ventilated discs and rear discs, equipped with a 1.4-liter engine and a 5-speed manual transmission, front-wheel drive, and a maximum torque of 220 Nm.
17
4
Share

What does the yellow triangle with an exclamation mark in a car mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's routine performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow horizontal line with parentheses and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four situations: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. The transmission oil should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure abnormality: A horizontal line with parentheses and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.