Can private cars undergo annual inspection in another location?

1 Answers
CharlotteLynn
07/30/25 9:48am
Private cars can undergo annual inspection in another location. Below is the relevant introduction to cross-regional annual inspection: Introduction to cross-regional annual inspection: Cross-regional vehicle inspection refers to conducting the annual vehicle inspection in a location other than where the vehicle was purchased. Precautions for cross-regional annual inspection: The procedure for cross-regional entrusted annual inspection requires the vehicle owner to first apply to the original registration location before the inspection can be conducted. Moreover, an application must be submitted annually to the vehicle management office of the original registration location. The issuance of the vehicle inspection entrustment letter must be done at the original registration vehicle management office. Without this entrustment letter, vehicles registered in another location cannot undergo normal annual inspection elsewhere. However, when applying for the cross-regional inspection entrustment letter, the vehicle owner does not necessarily have to go in person; relatives or friends can handle it at the original registration location and then mail it back.
Was this review help?
14
5
Share
More Forum Discussions

Can water enter the engine compartment?

Here are the reasons why you should not use water to clean inside the car engine compartment: 1. It can easily damage the generator, leading to failure. 2. If the engine is hot, the sudden cooling from water can cause significant harm due to thermal expansion and contraction. The engine block may crack under strong thermal shock. 3. There are many electrical wires in the engine compartment, and exposure to water can cause issues and accelerate wire aging. If you must use water, ensure critical components are waterproofed. It is recommended to use compressed air for cleaning instead. Precautions for water cleaning: 1. Cover the generator, distributor, brake fluid reservoir, etc., with cloth or plastic bags. 2. Only rinse after the engine has cooled down. Avoid using high-pressure water jets. 3. After rinsing, thoroughly dry the engine compartment with a clean cloth, especially the underside of the hood. 4. Do not directly spray water at the air intake or electrical connectors.
1
1
Share

Where to Place a Fire Extinguisher in a Car?

Car fire extinguishers are mainly placed in the following locations inside the vehicle: 1. Inside the glove compartment. 2. Under the driver's seat. 3. Under the front passenger seat. 4. In the trunk. The usage methods and precautions for fire extinguishers are as follows: 1. Carry the fire extinguisher to a spot near the fire, standing upwind of the fire. 2. Pull out the safety pin. 3. Hold the nozzle with one hand and the handle with the other. 4. Aim the nozzle at the base of the flames and sweep. Precautions: The storage environment temperature for car fire extinguishers should be within the range of -10°C to 45°C, and the placement location should be kept dry and ventilated to prevent the extinguisher from getting damp and corroding.
10
4
Share

Reasons for Abnormal Noises in Car Front Shock Absorbers During Winter

Causes of abnormal noises in shock absorbers during winter are as follows: 1. Extremely low temperatures causing the shock absorber rubber to become too hard. 2. Lack of lubrication between the metal rod and shock absorber sleeve due to prolonged use. 3. Shock absorber oil leakage or gaps in the connecting ball joint. Please promptly inspect and repair the shock absorbers if the following phenomena occur: 1. Poor vehicle handling during sharp turns, with a tendency to drift towards the outside of the curve. 2. Inaccurate steering feel during large-radius turns, with a tendency for the car to sway. 3. Noticeably increased front suspension vibration transmitted through the steering wheel when driving on rough roads. 4. Dull impact noises perceptible to occupants when encountering road bumps. 5. Wheel hopping during acceleration, resulting in sluggish acceleration.
20
0
Share

How Long Does an ETC Battery Last?

Typically, an ETC battery has a lifespan of 3 years. Currently, ETC devices are powered either by solar charging or via a charging cable. If any quality issues arise with the ETC device within the 2-year warranty period, you can have it repaired or replaced for free at an ETC bank service outlet. For wired ETC devices, if they are not used for an extended period, it is recommended to charge them once a month. This helps prevent the ETC battery's lifespan from being affected by self-discharge. There are also solar-powered ETC versions, which do not require deliberate charging if used frequently. ETC stands for Electronic Toll Collection, meaning electronic toll system. To apply for ETC, you need to provide the vehicle owner's valid ID card and the original and photocopy of the vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page stamped with the most recent annual inspection. Additionally, a bank card for deducting highway toll fees is needed. Applicants must be between 18 and 60 years old, and the vehicle must be registered under an individual's name. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle registration certificate; the vehicle for which ETC is to be installed. Benefits of installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions; Cost-saving: Reduce costs by minimizing vehicle start and stop frequency, decreasing wear and fuel consumption. Users can also enjoy toll discounts; Efficiency improvement: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have steeply angled windshields, which can reduce the driver's field of vision. Installing ETC without considering this may increase blind spots for the driver. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: ETC electronic tags require power, but generally, they do not need to be charged or have their batteries replaced, as they have a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that might block the solar panel.
10
4
Share

What is the wiper size for the Geely Vision X6?

The car uses wiper sizes of 22 inches and 18 inches. The Geely Vision X6 adopts pin-type interface wiper blades. The most common type of wiper is the traditional intermittent type, which can be divided into three or four segments, while another type is the rain-sensing wiper. Below is some related information about wipers: 1. Wipers can effectively improve the driver's field of vision. The switch is located on the lever behind the left side of the steering wheel, divided into front wiper and rear wiper switches. 2. When using the wipers, it is necessary to ensure that the wiper blades are sufficiently moist. Only with adequate moisture can they maintain good flexibility. Proper use of wipers can effectively maintain a clear field of vision and extend the service life of the wipers. 3. Wiper blades are made of rubber and need to be replaced regularly; otherwise, they may affect the performance of the car's wipers.
6
3
Share

Does a Dirty Fuel Injector Increase Fuel Consumption?

A dirty fuel injector can indeed increase fuel consumption. The primary reason is the use of incorrect oil viscosity, which leads to spark plug aging and insufficient ignition. Early symptoms of a dirty fuel injector include difficulty starting the engine when cold or weak acceleration after startup. Below are some noticeable signs of a dirty fuel injector: 1. Increased engine noise, especially in lower gears and below 2500 RPM. 2. Unresponsive throttle, uneven acceleration, and a noticeable throttle lag. When revving in neutral, the tachometer needle rises slowly. 3. Minor idle vibrations. 4. Frequent shaking during startup that is hard to control, with a slight misfire sensation when shifting gears at low RPM in 1st and 2nd gears.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.