Can Points Be Cleared from a Guangzhou Driver's License?

1 Answers
AnnieAnn
07/30/25 8:07am
Points can be cleared from a Guangzhou driver's license. Regulations on Point Clearance: If a motor vehicle driver's accumulated points within a scoring cycle do not reach 12, and all fines have been paid, the points will be cleared. If the points do not reach 12 but there are unpaid fines, the points will carry over to the next scoring cycle. If the penalty points on the driver's license are less than 12, the points can be cleared after paying all fines. If the points reach 12, the driver must report to the traffic management department of the public security authority at the place where the driver's license was issued or where the violation occurred within 15 days to participate in a seven-day study and examination on road traffic safety laws, regulations, and related knowledge. Precautions for Vehicle Point Clearance: If a vehicle violation is issued on the spot by a traffic police officer, the driver must carry their ID card, driver's license, vehicle registration, and the penalty notice to the local traffic division or detachment to handle the violation. Violations handled on the spot must be processed locally and cannot be handled in the driver's home jurisdiction.
Was this review help?
9
1
Share
More Forum Discussions

What is the Focus Steering Knuckle?

Ford Focus steering knuckle is one of the important components in the automotive steering axle, enabling stable vehicle operation and sensitive transmission of driving direction. The steering knuckle serves as the hinge for wheel steering, typically featuring a fork shape with two coaxial holes on the upper and lower forks for installing the kingpin. The steering knuckle spindle is used to mount the wheel, while the two lugs with pin holes on the steering knuckle connect to the fist-shaped parts at both ends of the front axle via the kingpin, allowing the front wheels to pivot around the kingpin at a certain angle for vehicle steering. The function of the steering knuckle is to transmit and bear the front load of the vehicle, supporting and driving the front wheels to rotate around the kingpin for steering.
12
2
Share

What are the vehicle types covered by the A1 driving license?

A1 driving license allows driving large passenger vehicles, city buses, medium-sized buses, large trucks, small cars, low-speed cargo vehicles, three-wheeled vehicles, and other vehicle types. The following are the relevant requirements for obtaining an A1 driving license: Age requirements: Applicants for large passenger vehicle driving license must be between 26 and 50 years old; Height and vision requirements: Height must be at least 155 cm, with naked or corrected vision reaching at least 5.0 on the logarithmic visual acuity chart, and no red-green color blindness; physical conditions such as height and weight must meet the standards, with sound limbs, a sound thumb, and at least three sound fingers among the remaining fingers;
11
5
Share

Is the Ford F150 gasoline or diesel?

The Ford F150 runs on gasoline, and it is recommended to use 92-octane gasoline with a direct injection fuel supply system. The Ford F150 is equipped with an engine that has a displacement of 3497ml, featuring a twin-turbocharged intake system and a DOHC valvetrain. The engine has 6 cylinders arranged in a V-formation, with 4 valves per cylinder. The vehicle adopts a four-wheel-drive mode and fully complies with the China VI emission standards. Its front and rear suspensions are double-wishbone independent suspension and leaf spring non-independent suspension, respectively, with a body-on-frame structure. The vehicle is powered by a 3.5T engine, paired with a 10-speed automatic transmission, delivering an output power of 280 kW and a maximum torque of 672 N·m.
19
4
Share

What is coasting in neutral while driving?

Coasting in neutral while driving refers to the operation method where the driver shifts the gear lever into the neutral position during vehicle movement, disengaging the clutch between the engine and the drive wheels, allowing the vehicle to move by inertia. Coasting in neutral can easily cause the engine to stall and may damage the car's engine. This practice should only be performed when safety is ensured and the vehicle's technical condition is normal. It is not recommended to stall the engine or coast in neutral when going down steep or long slopes. After shifting to neutral, the engine operates at a fixed idle fuel consumption rate; without disengaging, additional throttle input is required, and mismatched speed and gear may cause the vehicle to shake or stall. Modern vehicles are equipped with electronic fuel injection systems, where the fuel injection amount is controlled by an onboard computer based on sensors within the engine, making the idle speed non-adjustable in such vehicles.
20
4
Share

Are steering wheel covers the same for all cars?

Steering wheel covers are not the same for all cars. Different manufacturers have their own steering wheel design elements, which may vary in terms of outer diameter length, thickness, and even the material type of the steering wheel cover. Steering wheel covers are mainly categorized into linen, long-pile, faux leather, and genuine leather types. Car owners should be aware that whether it's linen, long-pile, or faux leather steering wheel covers, their anti-slip effects are generally average. During sharp turns, hands can easily slip off the steering wheel, which is very dangerous. If slipping occurs while turning, it may result in insufficient steering input, causing the vehicle to deviate from its intended path and potentially leading to a traffic accident.
12
4
Share

What is the best oil for Audi A3?

Audi A3 is best used with original equipment manufacturer (OEM) oil or full synthetic oil. Full synthetic oil is a high-grade oil product, derived from ethylene and propylene dispersed from crude oil's gas or natural gas, which undergoes complex chemical reactions like polymerization and catalysis to form a lubricant composed of large molecules. The benefits of using full synthetic oil include: 1. Full synthetic oil has a wider temperature range compared to semi-synthetic and mineral oils; 2. Synthetic oil is less prone to deterioration, has lower evaporation loss, and lasts longer than conventional oil; 3. It offers excellent chemical stability, good radiation resistance, high oil film strength, minimal foaming, superior lubrication, and reduced wear; 4. Full synthetic oil has less thermal degradation, saves fuel, and provides better engine protection.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.