Can People with Strabismus Obtain a Driver's License?

What are the reasons for the thermostat not opening?

Here are the reasons why the thermostat may not open: 1. Internal damage to the thermostat or damage to the thermostat opening valve; 2. Blockage in the water passage; 3. Frozen radiator; 4. Water temperature is too low. Below is more information about the thermostat: 1. The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it will severely affect the normal operation of the engine. 2. The function of the thermostat is to prevent the engine from becoming too cold. The main type of thermostat used is the wax-type thermostat. When the cooling temperature is below the specified value, the refined paraffin in the thermostat's temperature-sensing body remains solid, and the thermostat valve closes the passage between the engine and the radiator under the action of the spring. The coolant returns to the engine via the water pump, performing a small circulation within the engine.

8

2

Share

Does the Corolla Have a Timing Belt?

The Corolla is equipped with a timing chain, which is a type of engine timing belt. Its primary function is to drive the engine's valve train, connecting the timing gear on the upper part of the engine cylinder head to the crankshaft timing gear on the lower part. This ensures that the engine's intake and exhaust valves open and close at the appropriate times, allowing the engine cylinders to intake and exhaust air properly. The Corolla has a body length of 4635mm, width of 1780mm, and height of 1455mm, with a wheelbase of 2700mm. It is powered by a 1.2T turbocharged engine paired with a CVT continuously variable transmission. This engine delivers a maximum power output of 85kW and a maximum torque of 185Nm.

4

3

Share

How to Replace the Gear Oil for Tiggo 3

Steps for replacing the gear oil of Tiggo 3: 1. Remove the gear. First, locate the position of the odometer cable on the transmission, then carefully remove the odometer cable shaft cover, and slowly pull out the plastic small gear. 2. Drain the old gear oil. Remove the transmission gear oil drain plug, completely drain the old gear oil, and then tighten the drain plug. Ensure all the old oil is drained to prevent contamination of the new gear oil. 3. Add new gear oil. Start adding gear oil from the odometer shaft hole, paying attention to the oil level not exceeding the F line. Be careful to prevent oil spillage during the process. 4. Reinstall. Carefully reinstall the removed gear, preferably following the operation manual to ensure no parts are missing.

13

1

Share

Is It Safe to Install Additional Pillows in a Car?

Installing additional pillows in a car is safe. Car headrests are both a comfort-enhancing accessory and a safety protective device. The functions of car seat headrests include: 1. Effectively protecting the cervical spine, thereby preventing muscle spasms in the neck; 2. Effectively promoting local blood circulation, eliminating local inflammatory pathogenic factors, and preventing stiffness and tightness in the neck and shoulder muscles; 3. Helping to maintain proper neck posture, avoiding excessive forward tilting of the cervical spine, preserving the normal physiological curvature of the cervical spine, and preventing it from becoming straight or even developing a reverse curve; 4. Effectively slowing down the occurrence of degenerative cervical spine conditions, playing a significant role in preventing cervical spondylosis.

7

5

Share

What is the symbol for low beam headlights when driving at night?

The symbol for low beam headlights when driving at night is shaped like a lamp, with the emitted light beam pointing diagonally downward to the left. On the dashboard display, the low beam indicator appears in green. Common vehicle lighting usage scenarios are as follows: Low Beam Headlights: Primarily used for short-range illumination, with a limited projection distance of approximately 25-35 meters. They offer a wide illumination angle of about 160 degrees and cause minimal glare to human vision. These are employed during dusk, nighttime, overcast conditions, rain, snow, fog, and other low-visibility weather. Turn Signals: Located on the left-hand stalk near the steering wheel, turn signals are activated by pushing the lever upward for right turns and downward for left turns. Their main purpose is to indicate an impending turn or lane change. Usage scenarios include: vehicle startup, parking, entering/exiting curves, lane changes, U-turns, overtaking, and entering/exiting roundabouts. Brake Lights: Commonly known as "stop lights," brake lights are positioned on both sides at the rear of the vehicle. A key advantage is that they illuminate whenever the brake pedal is depressed, regardless of whether the vehicle's lights are on. This serves to alert following drivers that the vehicle is decelerating, prompting them to adjust speed and maintain a safe following distance.

7

4

Share

At What Speed Should You Shift Gears in a Manual Transmission?

Manual transmission should shift gears when the speed reaches 20 km/h and the engine speed is between 1500 to 2000 rpm. A manual transmission is a type of manual gearbox where the driver manually shifts gears by moving the gear lever, which changes the gear engagement inside the transmission and alters the gear ratio to achieve speed variation. The working principle of a manual transmission involves using the shift fork to change the gear ratio or tooth ratio of the engaged gears, thereby altering the driving torque to suit different driving conditions. The method for shifting gears in a manual transmission is as follows: 1. Gently press the clutch pedal all the way down with your left foot; 2. Lightly hold the gear lever with your right hand and shift gears according to the current speed. The shifting action should be gentle, quick, and done in one smooth motion; 3. Slowly release the clutch with your left foot, and depending on the speed, you can slightly press the accelerator with your right foot to complete the gear shift.

17

4

Share

Can People with Strabismus Obtain a Driver's License?

What are the reasons for the thermostat not opening?

Does the Corolla Have a Timing Belt?

How to Replace the Gear Oil for Tiggo 3

Is It Safe to Install Additional Pillows in a Car?

What is the symbol for low beam headlights when driving at night?

At What Speed Should You Shift Gears in a Manual Transmission?

How to adjust the time display on Sagitar?

How to Replace the Battery in a CS10 Key?

Is the Engine of the Hongqi H5 a Domestic Engine?

What are the reasons for the sudden failure of windshield wipers?