Can People with Monocular Vision Impairment Obtain a Driver's License?

2 Answers
OliveAnn
07/29/25 12:59am
People with monocular vision impairment, including those with monocular amblyopia, can obtain a driver's license if they meet certain conditions. The following requirements must be met: 1. Visual acuity standards: For individuals with monocular vision impairment, if their naked-eye or corrected vision reaches 5.0 or above on the logarithmic visual acuity chart, and their horizontal field of vision reaches 150 degrees, they can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars specially designed for the disabled. 2. Monocular blindness is also acceptable: Individuals with monocular blindness can also apply for a driver's license as long as they meet requirement 1.
Was this review help?
16
2
Share
OMatteo
08/12/25 5:10am
I've specifically looked up the driver's license physical examination regulations before. People with monocular vision impairment can indeed apply for a driver's license, but there are specific conditions. The naked or corrected visual acuity of the better eye must reach 5.0 or above, and the horizontal field of vision must exceed 150 degrees. Many people don't know that the field of vision test requires specialized equipment - the doctor will have you focus on a central point while observing peripheral light points. Additionally, color blindness must be ruled out; I've seen people get stuck because they couldn't distinguish traffic lights. I recommend going to designated medical institutions for examination in advance. If you wear glasses, make sure the correction is adequate. Actually, as long as the field of vision meets standards, driving safely is completely feasible by frequently turning your head to observe blind spots while driving.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What Causes Idle Vibration in the Buick Excelle?

Idle vibration in the Excelle is generally caused by a dirty throttle body or excessive carbon buildup in the fuel injectors. Additionally, check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or weak spark from the spark plugs can also lead to such issues. Below are the main reasons for severe idle vibration in the Excelle: 1. A dirty or damaged throttle body affecting idle vibration. First, clean the throttle body; if the issue persists, the throttle body assembly may need replacement. 2. Non-functioning spark plugs causing misfires and idle vibration. Inspect the spark plugs and ignition modules for potential faults. 3. Aging or cracked rubber components in the engine and transmission mounts. These components can no longer absorb the engine's vibrations, leading to idle vibration issues.
15
2
Share

Will non-functioning turn signals affect vehicle inspection?

Non-functioning turn signals will affect the annual vehicle inspection. The turn signals of a car are relatively prone to damage, and some vehicles may exhibit rapid flashing frequency, which indicates a malfunction in the turn signals. If the turn signals do not illuminate, the issue is likely related to wiring or fuses, and these should be repaired before the inspection. Below are some related troubleshooting steps: 1. Try activating the hazard lights to see if they work. If they do, the problem likely lies in the turn signal switch. 2. If they don't illuminate, check whether all four turn signals are not working. If the issue is with the bulbs, it is uncommon for all four bulbs (front, rear, left, and right) to fail simultaneously. 3. The most probable cause is wiring or fuse-related problems, so these components should be inspected.
6
3
Share

What Causes Grooves on Brake Discs?

Scratches on brake discs are a normal phenomenon, and generally, as long as the scratch depth does not exceed 0.6 millimeters, there is no cause for concern. There are two scenarios that lead to deep scratches: Here are the relevant explanations: 1. Only the front or rear brake discs have grooves. This situation is usually caused by driving habits or uneven distribution of braking force between the front and rear. 2. Only one brake disc has grooves while the others are normal. This is typically due to material issues or external forces. Possible factors include: a. Foreign objects getting stuck between this brake disc and the brake pad, coinciding with heavy braking. b. Uneven force distribution from the brake caliper. c. Manufacturing defects in the brake pad, resulting in uneven composite materials that make the pad too hard or contain large metal particles. Recommended solution: Remove the brake pads with grooves, place low-grit sandpaper on a flat surface, and sand the brake pads both horizontally and vertically until they are smooth.
17
3
Share

Can Water Be Used as a Substitute for Engine Coolant in Motor Vehicles?

Motor vehicle engine coolant cannot be replaced with water. One of the functions of automotive antifreeze is to prevent scale formation. If well water or other hard water is added to the antifreeze, it can easily cause scale buildup in the vehicle's engine, leading to clogged pipes and affecting the normal operation and lifespan of the engine. The water used in antifreeze is soft water, which is mixed according to specific standards. Therefore, it is not recommended to add water to automotive antifreeze on your own. Below is an introduction to coolant: 1. Function: Coolant is an essential part of a car's engine. Its main role is to circulate within the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at normal working temperatures. 2. Risks: When coolant levels are insufficient, the engine's water temperature can become excessively high, potentially causing damage to engine components and severe harm to the vehicle.
8
1
Share

Does the BYD Tang have a hybrid version?

BYD Tang does have a hybrid version. Here are the details about the BYD Tang: 1. The BYD Tang is equipped with a three-engine dual-mode powertrain system, which consists of a 2.0TI turbocharged engine and two motors (front and rear), enabling independent power output for the front and rear wheels. In hybrid mode, all three "engines" work simultaneously. 2. The BYD Tang hybrid version's 2.0-liter turbocharged engine has the model code BYD487ZQB. This engine delivers a maximum power of 141 kW, a maximum torque of 320 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque available between 1,500 and 4,000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power of 180 kW and a maximum torque of 380 Nm.
16
1
Share

What is the difference between 5W30 and 10W30 engine oil?

5W-30 and 10W-40 are two different engine oil grades with distinct performance characteristics. Here are their differences: 1. Low temperature: 5W-30 performs better than 10W-40 in cold-start conditions. 2. High temperature: 10W-40 offers better high-temperature stability compared to 5W-30. Additional information: 1. 10W-40 represents its SAE standard viscosity rating, indicating it's a multi-grade oil. 2. The number before W indicates the oil's flow performance at low temperatures - the smaller the number, the better the cold-start performance. 3. The number after W represents the oil's stability at high temperatures (i.e., resistance to thinning) - the larger the number, the better the high-temperature stability.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.