Can NIO be driven without a key?

Will the car keep running at idle speed in third gear?

Hanging in third gear at idle speed will not keep the car running continuously. The functions of car gears are as follows: 1. First gear: Starting gear, used for initiating the car's movement, not suitable for prolonged high-speed operation. 2. Second gear: Passing gear, mainly used for navigating roads and handling complex situations, such as sharp-angle (right-angle) turns without special obstacles, crowded and bustling areas, steep slopes, and bumpy roads. 3. Third gear: Transition gear, primarily used for low-speed driving in urban areas. It allows for easy acceleration to fourth gear or deceleration to second gear. 4. Fourth gear: Cruising gear, mainly used for extended high-speed driving and economical operation. Most vehicles achieve their economical speed in the lower speed range of fourth gear.

7

5

Share

Why Does the Envision 1.5T Experience Jerking?

The reason for the Envision 1.5T's jerking is due to a dirty transmission or excessively high transmission oil temperature. Dirty Transmission: Stubborn impurities and dirt have formed inside the transmission, which can clog the control lines, causing delays in the automatic transmission control valve and resulting in transmission jerking and impact. Excessively High Transmission Oil Temperature: The root cause of transmission issues is high transmission oil temperature. High temperatures can degrade the quality and friction characteristics of the transmission oil, increasing friction and wear, leading to transmission noise. Additionally, sludge (impurities or dirt) can form inside the transmission (such as in the valve body), causing delays in the automatic transmission control valve and resulting in transmission jerking and impact.

17

4

Share

What Causes the Central Control Screen to Go Black When Turning on the Headlights?

Most cases of the central control screen going black when turning on the headlights are caused by circuit board issues. Below are the reasons for car navigation display screen blackouts: 1. Vehicle power voltage issues: Check the stability of the car's power voltage. 2. Car navigation cables: If the voltage is stable, check whether there are any issues with the cables on the back of the device. Try replacing the connections to troubleshoot. If during contact, the display cables should be checked. If there's a problem, test with a new device. 3. Display and sound: If there's no image but sound is present, it indicates a loose power plug for the navigation display. If there's neither sound nor image, it's likely a DVD malfunction.

20

5

Share

What to Do When the Lynk & Co 03 Doesn't Beep When Locking?

To set the beep sound when locking the Lynk & Co 03, tap on the settings in the central control screen, then select the vehicle basic settings, and click on the lock feedback to enable the locking beep function. Here are the specific details about the Lynk & Co 03: 1. The Lynk & Co 03 has a length of 4657mm, width of 1840mm, height of 1472mm, a wheelbase of 2730mm, and a curb weight of 1570kg. 2. It features a MacPherson independent front suspension and a multi-link independent rear suspension. 3. It is equipped with a turbocharged engine, delivering a maximum horsepower of 190ps, a maximum power of 140kw, and a maximum torque of 300nm, paired with a 6-speed automatic transmission.

3

Share

Can the Brake Be Used to Control Speed in Subject 2?

In Subject 2, the brake cannot be used to control speed; the primary method is clutch control. Below are the relevant details: 1. Speed Control: When depressing the clutch, press quickly and release slowly. The correct pedal posture is to place the ball of your foot on the pedal to prevent slipping. On uneven road surfaces, you can lightly apply the brake to control speed, but the braking should be gentle, gradually increasing pressure during the process, avoiding sudden braking. 2. Precautions: Do not panic during the test; think clearly before operating. Choose a pair of soft-soled, non-slip shoes for practice and the exam. Memorize the steps and practice multiple times to develop good starting and stopping habits.

8

3

Share

How Often Should a Car Compressor Be Replaced?

Generally, a car compressor should be replaced every 10 years. The main maintenance tasks for a car compressor include checking the tension of the compressor belt. If the belt tension is too high, it can lead to premature failure of the compressor pulley bearing, resulting in loud compressor noise. If not repaired in time, it may cause damage to the clutch. Conversely, if the belt tension is too low, it can cause the belt to slip, reducing the compressor's speed and leading to poor cooling performance. The car compressor is the heart of the car's air conditioning refrigeration system, responsible for compressing and transporting refrigerant vapor. Compressors can be divided into two types: fixed displacement and variable displacement. Based on their working principles, air conditioning compressors can be categorized as fixed displacement compressors and variable displacement compressors.

7

1

Share

Can NIO be driven without a key?

Will the car keep running at idle speed in third gear?

Why Does the Envision 1.5T Experience Jerking?

What Causes the Central Control Screen to Go Black When Turning on the Headlights?

What to Do When the Lynk & Co 03 Doesn't Beep When Locking?

Can the Brake Be Used to Control Speed in Subject 2?

How Often Should a Car Compressor Be Replaced?

Does the Volkswagen Sharan Burn Engine Oil?

How many kilometers should an Audi A6L 2.7TDi run before changing the engine oil?

Does a Heavier Body Provide Better High-Speed Stability?

How much engine oil does the Chery Cowin X3 need?