Can New Energy Vehicles Charge During Thunderstorms?

Where is the windshield washer fluid filling location for the Sagitar?

The windshield washer fluid filling location for the Sagitar is behind the left front headlight. The functions of windshield washer fluid are: 1. Maintaining the transparency of the front windshield while driving; 2. Extending the lifespan of the windshield and wipers; 3. Preventing window icing in winter; 4. Preventing static electricity on the windows. Taking the 2021 Sagitar Manual Fashion Smart Connect Edition as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85 kW and a maximum torque of 175 N·m. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.

6

3

Share

What is the fuel consumption per 100 kilometers for Chery?

Chery's fuel consumption per 100 kilometers is approximately 7 liters. Comprehensive fuel consumption per 100 kilometers refers to: 50% urban + 50% suburban driving fuel consumption. If driving purely in urban areas, fuel consumption will increase to some extent; with air conditioning on, the increase will be more significant. If a full tank of fuel is used entirely on highways, fuel consumption will surprisingly decrease, which is normal. Actual fuel consumption is related to driving habits, skills, road conditions, weather, etc., and a fluctuation of 10% is normal. Break-in period not considered: During the break-in period of a new car, fuel consumption will be significantly higher and should not be used as a reference. After the break-in period, fuel consumption will naturally decrease.

19

0

Share

Why is the interior of the Mercedes-Benz C260L door uneven?

Mercedes-Benz door interior is uneven. The results show that: Under unchanged automotive production conditions, the microscopic surface irregularities caused during the galvanizing process of steel plates are the reason for the streaking on car door surfaces. The solution is to monitor during production and pay attention to non-compliant products. Uneven interior: It may be due to excessive force during the door-closing process causing damage to the car, or it could be an internal cleanliness issue leading to wear and tear that results in uneven door interior. It is important to regularly clean the sealing rubber strips of the door glass and the dust in the sliding channel's velvet groove.

7

2

Share

How to Remove Bubbles from Car Window Tint?

Methods to remove bubbles from car window tint include: 1. If there are few bubbles and they are relatively large, you can make a small cut, then use a squeegee and a heat gun to slowly flatten them; 2. If the bubbles are large, you can puncture them with a needle and then press them flat; 3. If there are many bubbles, the solution is to have the tint replaced at a car detailing shop. The functions of car window tint are: 1. To insulate against heat and sunlight, reducing the temperature inside the car; 2. To block UV rays and reduce the aging of car interiors; 3. To prevent injuries to passengers in case of accidental glass breakage; 4. To create a private space; 5. To reduce air conditioning consumption; 6. To enhance aesthetics; 7. To reduce glare.

7

1

Share

What is the RPM of the Geely Xingrui at 120 km/h?

Geely Xingrui's RPM at 120 km/h is 2000-2200. Introduction to RPM: Rotational Speed (or Rev) refers to the number of revolutions an object moving in a circular path makes around the center of the circle per unit time (different from frequency). Common types of rotational speed include rated speed and maximum speed. Rated Speed: Rated speed refers to the maximum rotational speed under rated power conditions. It is usually marked on the prominent part of the product as a main parameter when leaving the factory. Maximum Speed: Maximum speed is the highest rotational speed that can be achieved under specific conditions. For example, the spindle speed of a hard disk drive motor, which is the maximum speed the hard disk platter can reach under normal operating voltage conditions.

4

3

Share

Is it okay to idle the car with the air conditioning on for a long time?

Idling the car with the air conditioning on for a long time has negative effects on both the vehicle and the occupants. Idling with the AC on can lead to incomplete combustion in the engine, which may cause carbon buildup. Additionally, prolonged idling with the AC on can result in carbon monoxide poisoning for those inside the car, posing a serious danger. Here are some tips for air conditioning maintenance: 1. Comprehensive AC inspection: When using the air conditioning for the first time in summer, check the AC system thoroughly. Inspect the refrigerant level via the reservoir, check if the cabin air filter is too dirty, and look for any debris in the radiator. 2. Pay attention to AC cleaning: The cabin air filter should be replaced regularly to prevent moldy odors. The condenser should also be cleaned periodically, and for a thorough cleaning, the radiator needs to be removed.

12

3

Share

Can New Energy Vehicles Charge During Thunderstorms?

Where is the windshield washer fluid filling location for the Sagitar?

What is the fuel consumption per 100 kilometers for Chery?

Why is the interior of the Mercedes-Benz C260L door uneven?

How to Remove Bubbles from Car Window Tint?

What is the RPM of the Geely Xingrui at 120 km/h?

Is it okay to idle the car with the air conditioning on for a long time?

What are the reasons for the Baojun 560 air conditioner not cooling well?

What is the bulb model for the New Lingyu?

What Are the Causes of Engine Shaking During Downshifting?

Does the Volvo S60 support wireless CarPlay?