Can new cars use fully synthetic engine oil?

2 Answers
OThomas
08/29/25 7:48am
New cars can choose to use fully synthetic engine oil. Advantages of fully synthetic engine oil: Fully synthetic engine oil is artificially synthesized using chemical substances and methods, with highly targeted purposes (such as high temperature and high speed). Compared to mineral oil, it has higher quality. The main drawback of fully synthetic oil is its higher price, but it offers smoother cold starts, better fuel efficiency, extended oil change intervals, improved engine protection with lower maintenance rates, and cleaner crankcases. Engine oil classification: Engine oils are categorized into mineral oil, semi-synthetic oil, and fully synthetic oil. Among these three types, fully synthetic oil performs the best in terms of lubrication, cooling capacity, oxidation resistance, and cleanliness. Mineral oil performs significantly weaker in all these aspects.
Was this review help?
10
1
Share
VincentRose
09/11/25 5:17am
I used full synthetic oil directly with my new car, and it's absolutely fine. It provides smoother protection for the engine, especially during the initial break-in period when the engine is still settling in. This oil reduces friction between metal components and extends their lifespan. For example, my neighbor's car has been running great for years with it. Of course, you should check the vehicle manual for recommendations, as most new cars are compatible with full synthetic oil without causing any damage. Compared to mineral or semi-synthetic oils, it performs more stably at high temperatures, starts faster in cold weather, and reduces wear risks. Think about it—modern engines are more precise, so using premium oil saves a lot of hassle. Just remember to check the oil quality regularly and avoid cheap counterfeit products. Overall, it's totally worth it.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

How many points are deducted for not wearing a seatbelt in urban areas?

Not wearing a seatbelt in urban areas results in a deduction of 2 points. Penalty standards for not wearing a seatbelt on highways: When driving on roads other than highways or urban expressways, if the driver fails to use the seatbelt as required, they will be fined without point deduction; when driving on highways, if the driver fails to use the seatbelt as required, they will be fined and deducted 2 points; when a vehicle is traveling on a highway, if passengers do not wear seatbelts as required, they will be fined. The importance of seatbelts: They protect the driver and passengers. When a car encounters an emergency situation and brakes suddenly, the seatbelt can restrain the driver and passengers in their seats to prevent them from being thrown forward, thereby protecting them from injuries caused by secondary impacts. They prevent secondary collisions. When a vehicle collides or emergency braking is applied, the pre-tensioning device instantly tightens the loose seatbelt, firmly securing the occupants in their seats to prevent secondary collisions. Once the tightening force of the seatbelt exceeds a certain limit, the force-limiting device will appropriately loosen the seatbelt to maintain stable chest pressure.
1
1
Share

What are the dimensions of the XPeng P5 in terms of length, width, and height?

XPeng P5's dimensions in length, width, and height are 4808mm, 1840mm, and 1530mm respectively. XPeng P5: It is a pure electric sedan under the XPeng brand. The new vehicle offers multiple configurations, with the version equipped with ternary lithium batteries achieving a maximum range of 600 kilometers. The design of the new car continues the family styling of the brand's models. At the front, the car features a closed grille and LED headlights on both sides. The sides of the car boast smooth lines and include charging ports on the front fenders. Additionally, the car comes with hidden door handles. The P5 is also equipped with the Qualcomm Snapdragon SA8155P automotive-grade chip, supporting in-car mobile internet and communication capabilities. In terms of power, the motor in the new car delivers a maximum output of 155kW and a peak torque of 310N.m. Pure Electric Vehicle: A pure electric vehicle refers to a vehicle powered by an on-board power source, driven by an electric motor to move the wheels, and complies with all road traffic and safety regulations.
5
5
Share

What Causes the BMW Horn to Sometimes Not Work?

Horn intermittently not working or sounding hoarse is mainly caused by insufficient battery charge, damaged horn relay and button, or horn damage. The solutions are as follows: Check the power system: Turn on the headlight switch. If the headlights do not light up or appear dim, start the engine and slightly increase the throttle. If the headlights return to normal brightness and the horn works, it indicates insufficient battery charge. In this case, check the battery and its connecting cables as described earlier. If the battery charge is insufficient, the car can still operate normally. When the horn is needed, simply increase the throttle appropriately. Check the relay: If the headlights are functioning normally, press the horn button and check if the relay makes a clicking sound. If it does, the issue may be a damaged horn or poor grounding. Replace the horn assembly or address the grounding issue accordingly. The horn relay is typically located below the left side of the steering wheel. For different vehicle models, refer to the owner's manual and the fuse and relay identification plate in the car. The horn is usually located behind the radiator (coolant tank). If the horn has poor grounding, remove and reinstall it. If the horn is damaged, replace it with a new one.
8
0
Share

Is it normal for the Mercedes-Benz 260L to have a jerking sensation when downshifting?

It is not normal for the Mercedes-Benz 260L to have a jerking sensation when downshifting. The reasons for the jerking sensation in a car are as follows: Transmission causing the jerking sensation: The main function of the transmission is to change the speed ratio between the engine and the wheels and to expand the range of speed changes, thereby adapting to speed variations in different environments. Therefore, the transmission can reduce this jerking sensation to some extent, making the power output smoother. Generally, the better the match between the transmission and the engine, the less noticeable this jerking sensation will be. Internal engine faults: For example, if components inside the engine such as spark plugs or ignition coils fail, it can cause the car to lack acceleration during driving or even experience severe shaking and jerking sensations. Additionally, if the fuel pump becomes clogged or malfunctions, the fuel pressure will drop, preventing the fuel from properly atomizing and burning. On one hand, this may lead to carbon buildup in the car's engine, affecting its lifespan, and on the other hand, it can cause the car to drive weakly, resulting in noticeable jerking sensations during gear shifts.
8
1
Share

Causes of Brake Master Cylinder Failure?

Introduction to the causes of brake master cylinder failure is as follows: 1. Symptoms may include soft brakes, brake pulling, brake vibration, brake noise, brake failure, and brakes not releasing. 2. The braking system is a crucial component of a vehicle, directly related to driving safety and stability. 3. Upon opening the engine hood, a black disc can be seen, known as the vacuum booster. 4. The brake master cylinder is connected to the vacuum booster. When the driver presses the brake pedal, the vacuum booster amplifies the force applied by the driver to the brake pedal.
13
5
Share

What does DVVT mean?

Dvvt is the variable valve timing technology for engine intake and exhaust valves. Detailed information is introduced as follows: 1. When the engine is working, it outputs power by mixing the air and fuel vapor entering the engine and burning them in the combustion chamber. 2. Air enters the combustion chamber through the intake valve and is discharged through the exhaust valve after combustion. In this way, during the entire working process of the engine, the intake and exhaust volumes are fixed. 3. The opening and closing of the intake valve are driven by the camshaft, that is, the valve timing depends on the angle of the camshaft.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.