Can New Car Tires Be Replaced?

1 Answers
MacAlaina
07/29/25 11:11pm
Old tires can be replaced with new ones. It is recommended to replace tires on the same axle together. Below are specific details about tire replacement: 1. Lifespan: The service life is set at 3 years. If the vehicle is driven 20,000 kilometers a year, replacement can be considered after 2~3 years. 2. Spare Tire: Even if it's a brand-new tire, it should be considered for replacement after 3 years. Therefore, the spare tire in the car trunk also requires regular maintenance, and unused spare tires that have been stored for too long should be renewed. Damaged tires should be promptly repaired, and the spare tire should be switched back. Additionally, when replacing the spare tire, pay attention to adjusting the tire pressure, as there is a certain numerical difference between the spare tire pressure and the tires in use. Before replacement, use a tire pressure gauge to adjust it to the normal value for proper use.
Was this review help?
1
2
Share
More Forum Discussions

What is an Agricultural Tractor License?

An agricultural tractor license is a G license. Below is relevant information about the G license: 1. Introduction: The G driver's license is a nationally recognized tractor driver's license issued by the Agricultural Machinery Bureau. The application process involves attending classes (mechanical knowledge), written exams, vehicle practice (reverse parking, shifting), on-road training, and road tests. The specific process may vary depending on the policies of the county-level Agricultural Machinery Bureau in different regions. 2. G License Abroad: In Canada, the G driver's license requires first obtaining a G1 (learner's permit), equivalent to China's written test. With this license, one can practice driving on the road accompanied by an adult holding a full driver's license. The accompanying instructor must have over 4 years of driving experience. In most cities, there are generally no training grounds like those in China, nor are there "pole drills" or similar training. Instead, the first driving experience is on actual roads, merging into traffic.
20
0
Share

What are the reasons for the Buick Excelle having power but no response when starting?

Buick Excelle having power but no response when starting may be due to loose connections between the battery and the terminals, or it could be a damaged starter. Below is an introduction to the issue of no response when starting: 1. The starter on a car generally does not experience many faults because the starter only works for a few seconds each time it is used, and the total working time of this component in a year is only a few hours. 2. The battery is a component that is more prone to faults. The battery is responsible for starting the engine. When starting the engine, the starter needs to work, the ignition system needs to work, and the fuel pump needs to work, all of which rely on electricity. There are two terminals on the battery, and there is a component on the wire that connects to the terminals, allowing the battery to supply power to the car. This component may become loose, preventing the battery from supplying power to the entire vehicle.
19
0
Share

Differences Between Built-in and External Tire Pressure Monitoring Systems

Built-in tire pressure sensors and external ones differ in several aspects: price (built-in being more expensive), installation time (built-in being more complicated), accuracy (built-in sensors being more precise), and anti-theft features (built-in being more secure). Price: Built-in tire pressure monitoring systems are relatively more expensive than external ones. Installation time: Installing built-in tire pressure monitoring systems takes more time and requires professional assistance to remove the tires, as it is generally not something you can do yourself. External tire pressure monitoring systems, on the other hand, are simpler to install, and car owners can do it themselves. Accuracy: Due to environmental and external factors affecting external sensors, their accuracy is slightly lower than that of built-in sensors. Anti-theft features: Built-in systems are more secure because they are installed inside the tires, making them less likely to be stolen. External systems have poorer anti-theft performance because sensors from the same brand often use the same removal tools, making them easier to detach. Tire pressure monitoring involves real-time automatic monitoring of tire pressure while driving, alerting the driver to leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct tire pressure monitoring: Direct systems use pressure sensors installed in each tire to measure pressure directly. The data is transmitted wirelessly from inside the tire to a central receiver module, which displays the pressure for each tire. The system alerts the driver when pressure is too low or there is a leak. Indirect tire pressure monitoring: When a tire's pressure decreases, the vehicle's weight causes the rolling radius of that tire to shrink, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect systems rely on calculating the rolling radius to monitor pressure. Tire Pressure Monitoring System (TPMS) overview: This system combines the advantages of both direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and a four-wheel indirect system. Compared to a fully direct system, this hybrid approach reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.
8
0
Share

What brand is the big G with a B logo?

The big G car with a B logo is from the brand Brabus. More information about Brabus is as follows: 1. Brabus is the world's largest modified car brand, specializing in modifying Mercedes-Benz vehicles. Therefore, after modifying a Mercedes-Benz G-Class, the emblem is directly replaced with a B logo. 2. Brabus was founded in 1977 and is a German automotive brand primarily producing modified cars. Brabus exclusively customizes all models from Mercedes-Benz. 3. Compared to the original factory models, the modified Mercedes-Benz G-Class has significantly increased width and height, with a ground clearance of up to 438mm. The chassis height is exactly twice that of the standard version, yet the car's exterior still retains the classic boxy design.
9
4
Share

Where is the handbrake of Lexus ES200?

The handbrake of Lexus ES200 is a button type, located directly below the center console, marked with 'P' which is the electronic handbrake. The following is an introduction to the electronic handbrake: 1. The electronic handbrake is a technology that achieves vehicle parking braking through electronic control. Its working principle is similar to that of a mechanical handbrake, both achieving the purpose of vehicle parking braking by creating friction between the brake disc and brake pads, except that the previous mechanical handbrake lever has been replaced by an electronic button. 2. The electronic handbrake, also known as the electronic parking brake system, combines the functions of temporary braking during driving and long-term braking after parking, achieving vehicle parking braking through electronic control. At the same time, it extends the automatic parking function of the vehicle, allowing the driver to avoid prolonged braking when parking, effectively preventing the vehicle from sliding.
10
0
Share

How to Adjust Car Audio for the Best Sound Quality?

Nowadays, audio systems are typically equipped with a ten-band equalizer, allowing you to adjust the sound to achieve your desired audio style. Here are the effects of adjusting different frequency ranges: 1. 20Hz-60Hz (Sub-bass): The sound in this range should not be significantly boosted, as it can make the sound dull. The ideal adjustment should result in a soft and elastic sound. 2. 60Hz-250Hz (Bass): A moderate boost can enhance the power and loudness of the sound. Over-boosting may make the bass harsh. The ideal adjustment should produce a rich and clear sound. 3. 250Hz-2KHz (Midrange): Excessive boosting can create a telephone-like sound. The ideal adjustment should result in a deep and powerful sound. 4. 2KHz-4kHz (Upper Midrange): Over-boosting can reduce sound clarity and make it feel noisy. The ideal adjustment should produce a clear and bright sound. 5. 4kHz-5KHz (Treble): A significant boost can cause distortion and make the sound harsh. The ideal adjustment should create a sense of presence. 6. 6kHz-16kHz (Super Treble): Over-boosting can make the sound unnatural and raspy. The ideal adjustment should avoid excessive sharpness.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.