···
Log in / Register

Can New and Old Tires Be Used Together?

3 Answers
AnastasiaMarie
07/30/25 1:47am
New and old tires cannot be used together. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Additional Information: Tire Validity Period: Since tires are rubber products and are subject to aging issues, consumers should pay special attention to the production date of the tires. Do Not Use Tires Without the CCC Mark: Automotive tires must be certified and marked with the certification mark before they can be manufactured, sold, imported, or used in other business activities. Tires without the molded CCC mark cannot guarantee safety.
Was this review help?
3
3
Share
LeSimon
08/15/25 7:38am
I've been driving for over 20 years and have seen many car owners mix old and new tires to save money, but this is truly unsafe. Uneven tire wear leads to inconsistent grip, making it easy to skid or lose control when braking in the rain. I recommend replacing all tires at the same time, or at least replacing them in pairs on the same axle, such as both front or rear tires. Otherwise, new tires will wear out quickly, which is actually a waste of money. Regularly checking tire pressure and tread depth to ensure they are within safe limits can reduce the risk of accidents. Make it a habit to check once a month and take a quick look before driving—if any issues are found, address them early.
Was this review help?
18
3
Share
Expand All
IsabelleAnn
10/21/25 2:29am
From a cost-saving perspective, I understand that mixing old and new tires can save some cash in the short term, but it's not cost-effective in the long run. The difference in friction between old and new tires leads to faster wear, meaning you'll need to replace tires more frequently, resulting in higher expenses. It's better to just replace two tires at a time, maintaining consistency on the same axle. For example, replace only the front or rear tires and pair them with the older ones. This ensures more stable braking on wet roads, avoiding unexpected repair costs. Tire pressure should be adjusted regularly to ensure balance, and rotating their positions every six months can extend their lifespan.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What is the Difference Between Manual Mode in Tiptronic and a Manual Transmission?

Tiptronic belongs to the category of automatic transmissions, featuring both manual and automatic shifting modes. The specific details are as follows: 1. There are many types of automatic transmissions, with the most common being Tiptronic and dual-clutch transmissions. As the name suggests, Tiptronic allows free switching between manual and automatic modes. In most cases, Tiptronic transmissions operate in automatic mode, meaning the default setting is automatic shifting. Therefore, the presence of the manual mode in Tiptronic is primarily to compensate for the shortcomings of automatic mode in certain situations. 2. For example, when climbing a steep slope or overtaking, the acceleration in automatic mode is relatively slow, and the car's torque may not meet the requirements. In such cases, switching to manual mode enables quick overtaking or low-speed climbing.
10
1
Share

What are the symptoms of a faulty front shock absorber?

When the front shock absorber is faulty, the following symptoms may occur: 1. Abnormal noises: If the shock absorber makes unusual noises when the vehicle is driving on bumpy roads, it is highly likely that the shock absorber is damaged. 2. Oil leakage: By using a flashlight to inspect the shock absorber through the wheel arch, if oil leakage is observed on the exterior of the shock absorber, it indicates that the shock absorber is already damaged. 3. Loose chassis: When driving on bumpy roads, if the vehicle exhibits excessive bouncing or unstable body movement, it is usually a sign that the shock absorber has a problem. Extension: Most vehicles currently use hydraulic shock absorbers, which operate on a relatively simple principle. The upper mount of the shock absorber is integrated with the piston and piston rod, connecting to the vehicle body; the lower mount is integrated with the pressure tube, connecting to the lower control arm of the vehicle frame. When the vehicle experiences relative movement due to vibrations, the piston inside the shock absorber moves up and down, forcing the hydraulic oil in the oil chamber to flow repeatedly from one chamber to another through the piston flow valve. The friction between the flow valve orifice wall and the oil, as well as the internal friction between oil molecules, creates a damping force that converts the vibration energy into heat and dissipates it into the atmosphere.
3
0
Share

Why does the new car have difficulty accelerating and jerking?

New car having difficulty accelerating and jerking may be caused by the following reasons: 1. Clutch slipping. When you step hard on the accelerator, the engine speed rises quickly, but the vehicle speed does not increase accordingly, and you can clearly feel a state of weak acceleration. 2. Poor quality fuel used can affect the gasoline filter and fuel lines, leading to poor fuel supply and resulting in weak acceleration. 3. Carbon deposits accumulated on the throttle valve can affect the air intake, leading to insufficient engine power and weak acceleration when stepping on the gas. 4. Issues with the filter. Regularly clean the fuel filter to prevent excessive impurities in the fuel from clogging the fuel injectors. 5. The car has a small displacement and is carrying too much weight. If this is the case, it is a normal phenomenon.
19
4
Share

Why is there no hot air when the air conditioner is turned on?

There are several situations when the air conditioner does not produce hot air: 1. The heating function of the air conditioner takes about 5-10 minutes longer than cooling to start blowing air because the preheating time has not yet been reached. 2. The four-way valve is not open, or the four-way valve itself is stuck, or the electronic control does not output voltage to the four-way valve. 3. There may be a lack of refrigerant, as heating requires slightly more refrigerant than cooling. 4. The indoor pipe temperature sensor may be damaged. After starting operation, the compressor and fan motor of the outdoor unit need to run for a while before the indoor unit's fan motor begins to blow air. This is to ensure that no cold air is blown out from the indoor unit, making people feel uncomfortable, which is the so-called "anti-cold air" function.
9
0
Share

How to open the trunk of Changan CS55?

There are several ways to open the trunk of the Changan CS55: 1. Press the trunk button on the driver's door panel. 2. Use the trunk button on the key fob, press and hold for 2-3 seconds. 3. If the smart key is not nearby and remote opening is not possible, press and hold the trunk button on the key fob for 2 seconds to open the trunk. Below are several common methods to open a car trunk: 1. Mechanical key opening: Insert the key into the tailgate lock and turn to open or close the tailgate. 2. Remote key direct opening: Use the remote key to directly open the car trunk. 3. Press the unlock button directly. 4. For models with smart sensing keys: When the remote key is within a certain range (usually about 1 meter), press the switch on the tailgate to directly open the trunk.
12
0
Share

Where to Position the Toyota Jack on a Car?

Toyota jacks should be positioned on the metal raised groove areas located beneath the door sills on both sides of the vehicle's chassis. By crouching down, you can see these metal protrusions marked with groove indicators. Once the correct position is identified, the jack can be directly placed on the grooved metal area. When using a jack, always ensure the ground is flat and solid. Additionally, turn off the engine and engage the parking brake to prevent the jack from slipping due to engine vibrations or vehicle movement. How to use a car jack: Secure the vehicle: Before raising the jack, ensure the vehicle is completely stabilized to avoid instability or accidental drops that could cause injury. Stabilize the jack base: Pay close attention to ground conditions when using a jack. Always choose a hard, level surface for setup. If the ground is soft (e.g., mud or sand), place a wooden board or stone slab under the jack for added stability. Align with chassis support points: Always position the jack on the designated support points of the vehicle's chassis. The jack must engage with these points to prevent slippage. Misalignment may lead to jack instability, potential damage to the jack, or severe harm to the chassis. Place a spare tire under the car for safety: After lifting the vehicle, do not immediately remove the wheel bolts. Instead, place the spare tire beneath the car as a safety measure in case the jack fails or the vehicle drops. Operate the jack slowly and steadily—avoid sudden or excessive force to protect both the jack and personal safety.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.