Can National V Vehicles Be Licensed in Shenzhen?

3 Answers
StephenRose
07/29/25 5:09pm
After the implementation of National VI, National V vehicles cannot be licensed in Shenzhen. Here is the relevant introduction to National V: 1. Meaning: The National Fifth Stage Motor Vehicle Pollutant Emission Standard, referred to as the 'National V Standard,' has an emission control level equivalent to the European Union's fifth stage emission standard currently in effect. From National I to National IV, each upgrade in the standard reduces vehicle pollution by 30% to 50%. 2. Difference: Compared to the National IV standard, the new standard reduces nitrogen oxide emissions from light-duty vehicles by 25% and from heavy-duty vehicles by 43%.
Was this review help?
2
1
Share
CarterLynn
08/14/25 7:32am
A few days ago, I was chatting with some car owners about this issue and recalled my own experience when I spotted a new National V emission standard car in Shenzhen. However, when I went to the vehicle management office to inquire, the staff directly said it couldn’t be registered. Shenzhen requires new cars to meet the National VI emission standard, which has been strictly enforced since 2019. National V cars exceed pollutant emission limits, putting pressure on urban environmental protection, so the government regulates them strictly. I remember a friend who wanted to buy a used National V car and transfer it to Shenzhen also hit a roadblock—unless it was through special channels or for older vehicles, which might have exceptions, but ordinary people shouldn’t take the risk. Nowadays, when buying a car, you must choose National VI models, and even in the used car market, you need to check the emission labels carefully. Anyway, policy trends are getting stricter, with cities like Beijing, Shanghai, Guangzhou, and Shenzhen all pushing for this. It’s better to upgrade to a new car sooner or consider new energy vehicles. A car without a license plate can’t be driven on the road—it’s both troublesome and a waste of money, so it’s best to be cautious.
Was this review help?
7
5
Share
Expand All
VeraMarie
10/13/25 5:18am
I often research automotive policies. To improve air quality, Shenzhen has implemented the stringent China VI emission standards. It's nearly impossible to register a China V vehicle in Shenzhen, as new vehicle registrations now mandate China VI compliance. According to my research, this is because China V vehicles emit higher levels of nitrogen oxides and particulate matter, failing to meet local environmental regulations. Unless specific exemptions apply for used vehicles relocated from other regions, the vehicle management office will reject all such applications. I recommend verifying your vehicle's environmental rating before taking action. Additionally, China VI standards are being rolled out nationwide, with Shenzhen adopting them more decisively as a pilot city. Consult official sources or professional dealerships before purchasing a car—don't rely solely on past experience. Making informed choices about vehicle sources can save you time and money while contributing to environmental protection. By the way, similar policies are common across the Pearl River Delta region, so adapting to these changes is essential.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Where is the output speed sensor of the 09g transmission located?

The output speed sensor of the 09g transmission is located at the upper front of the transmission. The automotive transmission is a set of gear-shifting devices used to coordinate the engine speed with the actual driving speed of the wheels, aiming to achieve optimal engine performance. The transmission can produce different gear ratios between the engine and wheels during vehicle operation. Below is an introduction to dual-clutch transmissions: 1. Dual-clutch transmissions come in two types: dry and wet. 2. A wet dual-clutch refers to a multi-plate clutch system where two sets of coaxial clutches (one large and one small) are installed together in a sealed oil chamber filled with hydraulic fluid. Thus, the wet clutch structure offers better adjustment capability and superior thermal performance, enabling it to transmit higher torque. 3. The dry dual-clutch was developed based on the technology of the 6-speed DQ250 wet dual-clutch, with simplified hydraulic systems. 4. The structure of a dual-clutch transmission is very similar to that of a manual transmission, featuring two sets of clutches responsible for shifting even and odd gears respectively, significantly improving shift speed.
14
0
Share

Is a Driving License Required for Car Paint Touch-Up?

Car paint touch-up requires leaving the driving license, and here are the specific reasons: 1. National requirements for vehicle repairs: Qualified shops performing sheet metal painting or repair projects are required by public security authorities to record vehicle information into the public security management system before proceeding with repairs. Failure to record the information in the system will result in corresponding liabilities, primarily to facilitate the tracing of hit-and-run vehicles or illegal activities such as smuggling and theft. Recording the information requires the vehicle's driving license, but the shop should return it promptly after recording. 2. Uploading vehicle information for post-accident repairs: If the paint job is covered by insurance and an immediate damage assessment cannot be made, and the owner is not present to wait, the owner may need to leave the driving license to facilitate the later upload of vehicle information. Many shops handling a high volume of accident vehicles will request the owner to leave the driving license and retrieve it together with the car after repairs. There are also cases where some repair shops retain the owner's driving license to manipulate insurance claims, but such practices are now rare.
5
2
Share

What are the design specifications for non-motorized vehicle ramps?

The ramp width should not be less than 0.30m, the slope should not exceed 1:5, and the ramp length should not exceed 6m. Below is an introduction to ramps: 1. Introduction: Refers to a uniformly inclined walkway or driveway. It serves as an inclined traffic passage connecting areas with elevation differences or floors, as well as vertical traffic and evacuation measures at entrances. 2. Content: When steps cannot be constructed due to usage or other reasons, ramps can be used to address height variations. Public green spaces and public buildings typically require barrier-free access, making ramps an essential element. Ramps are an important method for pedestrians to navigate elevation changes on the ground. 3. Application: Used in various public places such as residential thresholds, hotel corridors, convention centers, shopping malls, supermarket entrances, residential community gates, nursing homes, hospitals, train stations, airports, and more.
8
5
Share

What is the typical capacity of a food delivery box placed on the pedal?

The typical capacity of a food delivery box placed on the pedal is generally 30-40 liters. Below is an introduction about car pedals: 1. Introduction: The welcome pedal is an automotive accessory used to decorate the threshold area of a car, serving the purpose of protecting and beautifying the car body. It is one of the automotive modification products. Welcome pedals are mainly installed on the mudguards near the car doors, with all four doors having them. The design of car welcome pedals varies according to different car models. 2. Features: Made of stainless steel material, the welcome pedal has a smooth and shiny appearance, is easy to install, and provides certain anti-collision and anti-scratch functions. It also serves as a decorative element, being simple yet elegant. 3. Advantages: The most obvious advantage of installing welcome pedals is their decorative effect on the car. Many welcome pedals are equipped with circuits that light up when the car door is opened, creating a welcoming atmosphere for passengers.
3
1
Share

Does Desay SV 280b Support CarPlay?

Desay SV 280b does not support CarPlay. CarPlay is an in-car system. Automotive modules contain different in-car systems. Below is a detailed introduction about automotive modules: 1. Automotive Engine Control Module: The automotive engine control module is the core component of engine control. Based on input information from various sensors, it controls the fuel injection and ignition timing of the engine and provides optimal control commands for other output devices. 2. Automotive Ignition Module: The automotive ignition module, also known as the ignition controller, can achieve automatic ignition, flame indication, flameout alarm, and signal transmission by selecting the appropriate combination of metal probes or UV-sensitive tubes according to different environmental requirements.
16
0
Share

Which car has an airbag in front of the passenger seat?

airbag is the symbol for a safety airbag. Additional information is as follows: 1. Introduction: The airbag system is a passive safety protection system (see vehicle safety performance). When used in conjunction with seat belts, it can provide effective collision protection for occupants. 2. Components: It mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is usually installed on the dashboard. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are installed together with the electronic control device. The airbag module mainly consists of the airbag, gas generator, and igniter.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.