Can National II Emission Vehicles Still Be Driven on the Road?

Under What Conditions Can You Take the Subject 4 Test?

Generally, you can schedule the Subject 4 test three days after passing the Subject 3 test. The processing time for Subject 4 is relatively fast, and it usually takes two to three working days to secure an appointment. Below is an introduction to the passing scores for the driving test: Subject 1: Road traffic safety laws, regulations, and related knowledge test. It is a written test conducted on a computer, with a full score of 100, and a passing score of 90 or above (including 90). Subject 2: Field driving skills test. It is conducted in a real vehicle within a designated area, with results categorized as pass or fail only. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The full score is 100, with a passing score of 80 or above (including 80). Subject 3: Road driving skills test. It is conducted on a real vehicle on a road or simulated field, with a full score of 100. The passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. Subject 4: Safe and civilized driving-related knowledge test. It is a written test with a full score of 100, and a passing score of 90 or above (including 90).

116

Share

What Causes Difficulty in Starting a Car but It Still Starts?

Difficulty in starting a car but it still starts is usually caused by aging spark plugs, throttle body, or car battery. For gasoline vehicles, after removing the air filter to check and confirm there is no blockage, inspect the spark plugs, high-voltage wires, ignition coils, and fuel injectors. Poor ignition or inadequate fuel injection can lead to difficulty in accelerating. The reasons for difficulty in starting a car are as follows: Carbon deposits: Difficulty in starting caused by carbon deposits in the car, accompanied by slight shaking at idle speed, can be resolved by cleaning the throttle body, intake manifold carbon deposits, and fuel injectors. Weak battery: A weak battery is a more common issue, and the first thought when a car won't start is usually that the battery is dead. The solution is simple: just jump-start the car using another vehicle or battery.

113

Share

Can a car still run without coolant?

A car cannot continue to drive without coolant. The absence of coolant prevents proper circulation, causing the engine to overheat as it cannot dissipate heat effectively. In severe cases, this can lead to engine damage. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipelines, with a focus on the five-way hose. Coolant flows through the five-way hose and is distributed to different parts of the car to function. If there are signs of coolant leakage in this section, replace the hose or resecure the connection as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir so that it flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir may appear slightly pink. Continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, pour another container of coolant into the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.

116

Share

What happens if you miss the scheduled driving test for Subject 2?

If you fail to attend the scheduled Subject 2 driving test, it will be marked as a failure. Here are the details: Regulations: According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," applicants who cannot attend the test at the scheduled time must apply to cancel the appointment at least one day in advance. If an applicant does not attend the test at the scheduled time, the test will be marked as a failure. Test attempts: Each subject can be taken once, and those who fail can retake it once. If you do not attend the retest or fail the retest, the current test session will be terminated, and the applicant must reschedule the test. However, Subject 2 and Subject 3 tests must be rescheduled at least ten days later.

113

Share

What does the iDrive system mean?

iDrive system is the abbreviation of BMW's unique intelligent driving control system "intelligent-Drive-system". It represents a new, simple, safe, and convenient future driving concept, falling under the category of automated and informational driving systems. Some high-end cars and concept vehicles are equipped with this latest technological innovation. Below is a related introduction: Functions: iDrive is very easy to use. The eight main menus include in-car climate, communication (such as car phone), entertainment (CD/TV, etc.), navigation, information, BMW service support, function settings, and help menu. Equipment: The external display device of this system is a rotary controller located in the traditional gear shift position and an LCD display in the middle of the dashboard. The function of this knob is similar to a computer mouse. Through actions such as pushing, pulling, rotating, and pressing, it can control multi-level menus on the display screen and select hundreds of functions under the eight main menus.

106

Share

What Causes the Clicking Sound in the Scooter's Transmission Box?

Scooter gearbox noise could be due to damaged transmission gears, bearings, or problematic gear oil. Sometimes, poor brake shoe blocks might also cause abnormal sounds. Additionally, check for issues with the pulley, as faults here can transmit noise to the gearbox, making it sound like the gearbox is the source. Here's some extended information: Principle: Scooters use continuously variable transmission (CVT), where the principle involves the overrunning clutch driving the transmission box, ultimately transferring power to the rear wheel drive. Inside the transmission box, a small driving gear rotates a larger driven gear via a belt. Hazards: If gear incremental clearance or meshing clearance is too large, or the belt is too loose, it can cause gear displacement or poor engagement clearance during acceleration, leading to abnormal sounds. Similarly, when the throttle is released, the engine speed drops, altering the transmission ratio, and the belt and gear engagement changes, which can also result in abnormal sounds.

104

Share

Can National II Emission Vehicles Still Be Driven on the Road?

Under What Conditions Can You Take the Subject 4 Test?

What Causes Difficulty in Starting a Car but It Still Starts?

Can a car still run without coolant?

What happens if you miss the scheduled driving test for Subject 2?

What does the iDrive system mean?

What Causes the Clicking Sound in the Scooter's Transmission Box?

Does sand blowing into the intake pipe when replacing the air filter have any impact?

What Does Automotive Sheet Metal Technology Mean?

Do 8-year-old vehicles exempt from inspection still need to apply for the annual inspection sticker?

Which Gear Should Be Used for Climbing Hills?