Can motorcycles go on the highway in Jiaxing?

1 Answers
WalterFitz
07/28/25 3:12pm
Motorcycles are not allowed on the highway in Jiaxing. Drive in the rightmost lane: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," if there are two or more motor vehicle lanes in the same direction on the road, the left lane is the fast lane, and the right lane is the slow lane. Motor vehicles driving in the fast lane should maintain the speed specified for the fast lane. If they cannot reach the required speed, they should drive in the slow lane. Motorcycles must drive in the rightmost lane or in designated lanes. Motorcycles are prohibited on highways in some areas: Compared to other motor vehicles, motorcycles are lighter, thinner, and have lower safety ratings. When speeds reach around 80 kilometers per hour, it becomes difficult to control the motorcycle if it skids or encounters bumps, posing a threat to both the rider and other vehicles. Therefore, riders should be aware that motorcycles are not allowed on highways in certain regions. For example, in Sichuan Province, two-wheeled motorcycles are prohibited from entering highways, and violators will be penalized with 3 demerit points.
Was this review help?
10
5
Share
More Forum Discussions

Is the CHR equipped with an imported engine?

In the early production stages, the CHR's engine might have been imported, or it may have contained many imported components. For later production models, the engine may no longer be imported, or the number of imported parts may decrease. As production progresses, the localization rate of various components in the vehicle tends to increase. The CHR is positioned as a compact SUV, with dimensions of 4360 mm in length, 1795 mm in width, and 1555 mm in height, and a wheelbase of 2640 mm. For the interior, the overseas version of the CHR features an 8-inch multimedia touchscreen, an extremely minimalist center console button layout for optimal visual appeal, and also comes equipped with an upgraded Toyota HMI human-machine interface system as the vehicle's multimedia information system.
10
0
Share

What are the disadvantages of independent suspension?

The disadvantages of independent suspension are its complex structure, high cost, and inconvenient maintenance. Additionally, due to its complex structure, it may occupy some of the passenger space inside the vehicle. An independent suspension system is one where the wheels on each side are individually suspended under the frame or body via an elastic suspension system. Its advantages include: 1. Light weight; 2. Reduced impact on the body and improved wheel ground adhesion; 3. The use of softer springs with lower stiffness to enhance vehicle comfort; 4. Lowering the engine position and the vehicle's center of gravity, thereby improving driving stability; 5. Independent movement of left and right wheels, reducing body tilt and vibration.
19
0
Share

What is the shutdown sequence for the Volvo XC40?

Volvo XC40 shutdown sequence: 1. Press the brake to ensure the vehicle is stationary and shift the gear to N; 2. Pull up the handbrake; 3. Shift to P, then release the brake; 4. Turn off all unnecessary electrical equipment in the car; 5. Check that the gear is in P, all unnecessary electrical equipment is turned off, and the steering wheel is straightened; 6. Turn the key counterclockwise to the end, or press the one-button start switch to adjust the ignition switch position to OFF. The Volvo XC40 is the first model produced by Volvo Cars based on the advanced CMA basic modular architecture, and it is the first compact SUV in the Volvo lineup. The car has a length, width, and height of 4425 mm, 1863 mm, and 1652 mm respectively, with a wheelbase of 2702 mm.
10
1
Share

What are the disadvantages of a horizontally opposed engine?

The disadvantages of a horizontally opposed engine are: 1. The structure is relatively complex; 2. Due to gravity, the horizontally placed cylinders cause oil to flow to the bottom, resulting in insufficient lubrication for one side of the cylinders; 3. Higher maintenance costs are required, and the wider engine body is not conducive to layout; 4. Because the pistons are placed horizontally and affected by their own gravity, the friction between the top and bottom of the pistons and the cylinder liners during horizontal reciprocating motion is uneven. This leads to different wear on the upper and lower inner surfaces of the cylinder liners, with the bottom experiencing more wear; 5. The horizontal opposition can counteract lateral vibrations, but this is only an ideal situation. If the valves cannot close completely due to carbon buildup or other reasons, it can cause unequal cylinder pressure, resulting in unequal lateral forces. In such cases, lateral shaking can still occur.
6
2
Share

What grade of oil should be used for the Fit?

The Fit can use either 5W30 or 0W30 engine oil. The 'W' stands for winter, and the smaller the number in front, the lower the temperature the oil can adapt to, and the better its low-temperature fluidity. The number after 'W' refers to the kinematic viscosity at 100 degrees Celsius, with a higher number indicating higher viscosity and stronger high-temperature resistance. The Fit is a hatchback launched by GAC Honda, with dimensions of 4065 mm in length, 1695 mm in width, and 1525 mm in height, and a wheelbase of 2530 mm. In terms of appearance, the Fit adopts Honda's new family-style front face design concept 'solidwing,' where the front grille integrates with the headlights, highlighting a sharp and cool look.
5
2
Share

What are the differences between Sahara, Rubicon, and Wrangler?

The following are the differences between Sahara and Wrangler: Exterior: The Sahara model features wheel arches painted in the same color as the body. The Wrangler, on the other hand, adopts a two-tone body design, with all four wheel arches made of black textured plastic, not matching the body color. In other exterior aspects, there is no difference between the two vehicles. Chassis System: From the market positioning of the Wrangler series, the Wrangler model focuses more on extreme off-road performance, specifically in rock crawling, so its chassis has been reinforced. The Sahara model, however, emphasizes practicality and economy for everyday off-road use.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.