Can Motorcycles Enter the Underground Parking Lots of Shopping Malls?

1 Answers
MicahDella
07/30/25 8:13am
Most shopping malls have designated parking spots for motorcycles, depending on specific mall regulations. Here are the detailed introductions to relevant contents: Parking Tips: Motorcycles should be parked on solid and flat ground with the ignition switch turned off and the key removed. Two-wheeled motorcycles should be supported by the main stand or side stand when parked; three-wheeled motorcycles should be put into first gear to prevent slipping; after parking, the parking brake should be applied for tricycles, with the right hand gripping the hand control brake lever to keep the vehicle in the braking position. Precautions: After the vehicle is parked, the engine idles. At this time, do not rev the throttle to avoid causing the engine to run at high speed without load. If you do not continue driving immediately after parking, turn off the ignition switch to stop the engine to save fuel and prevent the engine from overheating. Lock the steering lock to ensure safety and prevent theft. Turn the fuel tank switch to the off position to prevent fuel leakage. If parking for a long time, remove the battery or the battery ground wire to prevent power leakage.
Was this review help?
12
3
Share
More Forum Discussions

What is the reason for the screw spinning in place and not coming out?

It may be due to the screw post inside being broken, making it impossible to unscrew. Below are the precautions for installing license plates: 1. Do not reduce the number of installation screws: License plates should be installed properly, otherwise it will be considered as not installing the motor vehicle license plate in accordance with regulations and will be penalized. For example, current cars have 4 installation holes each for the front and rear license plates, so when installing the screws, you must install all 8 screws; missing even 1 is not allowed. 2. Do not install license plate frames randomly: License plate frames should not be installed randomly. For example, the license plate frames that 4S shops give for free, which have vehicle sales advertisements on the top and bottom, cannot be used according to the new regulations. 3. Incorrect hanging: The position where the license plate is hung should not affect the safe driving of the motor vehicle or the recognition of the license plate. For example, hanging it diagonally may result in the checkpoint camera not being able to fully capture the license plate.
6
5
Share

What Causes the Car's Rearview Mirror to Fail to Retract Automatically?

Car rearview mirrors may fail to retract automatically due to the owner manually folding them, which can disable the automatic retraction function, or it could be caused by a disconnected or dead battery. Below is relevant information about car rearview mirrors: 1. Working Principle: Rearview mirrors have a field of view issue, referring to the range that the mirror surface can reflect. The industry mentions three elements of the field of view: the distance between the driver's eyes and the rearview mirror; the size of the rearview mirror; and the radius of curvature of the rearview mirror. 2. Design Points: The aspects include the obtainable field of view (indirect vision), image distortion, image clarity, image size, and the position of the image in the rearview mirror, making it easy to adjust according to changes in the driver's viewpoint. 3. Classification: They can be divided into three main series: flat mirrors, spherical mirrors, and double-curvature mirrors. There is also another type called the prism mirror, which has a flat surface but a prism-shaped cross-section, commonly used as an anti-glare interior rearview mirror.
12
4
Share

How to Reset the Maintenance Light on Honda URV?

Honda URV maintenance light reset method is as follows: 1. First, set the URV's power mode to ON mode and ensure the vehicle is in a complete stop state. 2. On the multi-information center display, press the HOME button. 3. Select Vehicle Settings, then find and reset the vehicle maintenance information to complete the process. Relevant information about the Honda URV is as follows: 1. In terms of safety features, the Honda URV is equipped with a Collision Mitigation Braking System, LKAS Lane Keeping Assist System, RDM Lane Departure Mitigation System, MVCS 360° Panoramic View Monitor, and CTM Cross Traffic Monitor. 2. In terms of exterior design, the URV adopts Honda's family-style appearance, featuring a smooth and rounded front grille and bumper design. The chrome-plated grille decoration adds depth to the front fascia. The blade-style headlights are paired with a diamond-cut lamp cluster, with the turn signals, fog lights, and daytime running lights all utilizing LED light sources. 3. In terms of powertrain, the new vehicle offers a choice between 1.5T and 2.0T turbocharged engines.
10
3
Share

What are the differences between Lingtuo and Ruimai?

The differences between Lingtuo and Ruimai are mainly reflected in the following aspects: 1. Price: Lingtuo is slightly more expensive than Ruimai. 2. Power: Lingtuo has only one powertrain option, equipped with a 2.5T inline 4-cylinder turbocharged diesel engine (model JE4D25Q5A) across the entire lineup, paired with either a 6-speed manual or 6-speed automatic transmission, delivering a maximum power of 95kW and peak torque of 320Nm. Ruimai offers two powertrain options, one of which shares the same diesel engine as Lingtuo. 3. Different logos: Lingtuo features the ISUZU badge, while Ruimai carries the JIM badge. 4. Exterior and interior: Both vehicles are pickup trucks. The Lingtuo's front fascia with its classic grille gives it a more imposing look, and its headlight assembly with lenses significantly improves visual effects compared to halogen bulbs. Ruimai's exterior design is very attractive, with smooth overall lines. In terms of configuration, both are similar. Lingtuo is positioned between Ruimai and D-MAX, often referred to as the small-displacement version of D-MAX.
20
3
Share

How to Start a Hyundai Elantra When the Key Fob Battery Dies?

If the remote key fob of a Hyundai Elantra runs out of battery, you can place the key fob near the start button inside the vehicle and then press the start button to initiate the engine. Below is additional information about the Hyundai Elantra: 1. The Elantra is equipped with two engine options: a 1.6L naturally aspirated engine and a 1.8L naturally aspirated engine. 2. The 1.6L engine delivers 128 horsepower and 156 N·m of maximum torque, with peak power achieved at 6,300 rpm and maximum torque at 4,850 rpm. This engine features multi-point fuel injection technology and an aluminum alloy cylinder head/block. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission (6AT). 3. The 1.8L engine produces 146 horsepower and 175 N·m of maximum torque, reaching peak power at 6,500 rpm and maximum torque at 4,700 rpm. Similarly, it utilizes multi-point fuel injection and an aluminum alloy cylinder head/block, mated to either a 6-speed manual or 6AT transmission.
9
5
Share

How to Remove the Interior Rearview Mirror of a Focus?

The method for removing the interior rearview mirror of a Focus: 1. Remove the mirror glass, which is relatively simple. Adjust the mirror to its maximum angle and pull it off by hand, being careful not to force it from one side. After removing the mirror glass, disconnect the two plugs. Adjust the positions of the internal clips to the left state, then carefully open the back cover with a pry tool. After removing the cover, unscrew the four screws at the back and disconnect all visible plugs. Note that many have clips and should not be forced. 2. Separate the pivot and mounting post. The main method is to insert the pry tool according to the position, then hold the ground light position of the mirror with both hands, lift it upward, and slowly rotate the mirror toward the front of the car. When the mirror passes a locking position, it can be separated. This requires some trial and error to find the correct locking position. After removal, you will find a screw, which should be removed. Then, remove the ground light and its plug. Finally, pull all the wires out through the hole in the center of the pivot, starting with the thinner plugs. After removing the lower shell, the mirror can be taken off.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.