Can motorcycles be refueled directly with the fuel nozzle?

2 Answers
VonAustin
07/29/25 3:16am
Motorcycles cannot be refueled directly with the fuel nozzle. Because the fuel tank of a motorcycle is relatively small, and the pressure of the fuel dispenser is relatively high, it is easy for gasoline to overflow during refueling. The motorcycle's engine is located directly below the fuel tank, and when gasoline overflows, the recently turned-off engine can easily ignite the spilled gasoline, causing a fire. Additional information: 1. Helmet - Essential protective gear for motorcycle riders: Helmets are mandatory protective equipment for both driving and riding motorcycles. Most accidents involving motorcycles occur because the head hits the ground, leading to severe consequences. 2. Drive in the correct lane to ensure safety: Motorcycles must be driven in the designated lane as per regulations; otherwise, in the event of an accident, the rider will bear corresponding legal responsibility.
Was this review help?
15
1
Share
ONathan
08/12/25 7:08am
After riding motorcycles for ten years, I finally understood this rule at gas stations. Actually, 90% of gas stations prohibit motorcycles from directly pulling up to the pump island for refueling; instead, you must use a metal canister as an intermediary to prevent static electricity from igniting the gasoline. Last summer, I witnessed a guy insisting on pulling up to the pump island—the moment the nozzle touched the fuel tank opening, a 'bang' sound erupted with blue flames. Luckily, the staff reacted quickly. Now, I always carry a 20-liter metal fuel canister. Remember, it must be made of metal! Static sparks from plastic cans due to friction can still ignite the fuel, and the metal can must also be grounded during refueling. Once, at a highway gas station, I saw a foreigner riding a Harley who didn’t know this rule—three staff members held his fuel canister and educated him for half an hour.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What Causes the Abnormal Noise in Nissan Qashqai's Steering?

The causes of abnormal noise in Nissan Qashqai's steering are: 1. Aging of the steering tie rod ball joint, replace the steering tie rod ball joint and perform a four-wheel alignment; 2. Leaking of the steering gear dust cover, replace the dust cover or reapply grease; 3. Steering gear failure, excessive gear clearance in the steering gear, requiring replacement of the steering gear; 4. Improper tension or aging of the power steering belt, adjust the belt tension or replace the belt; 5. Insufficient lubrication in the steering column causing high friction, simply add lubricating oil; 6. Noise from the rebound clip of the turn signal auto-return mechanism, this situation requires confirmation by the owner; 7. Abnormal airbag clock spring in the steering wheel, replace the airbag clock spring. The Nissan Qashqai is a compact SUV under Dongfeng Nissan, with body dimensions of 4401mm in length, 1837mm in width, 1593mm in height, and a wheelbase of 2646mm.
15
5
Share

How to Open Car Windows When the Engine is Off?

The method to open car windows when the engine is off is: simply turn the key to the ON position. At this point, the car is only in the power-on state without ignition, and the windows can be opened as long as the car has power. Car windows are openings set in the four walls of the vehicle, designed to block wind, rain, and UV rays while maintaining visibility. Most car windows are made of glass materials, primarily laminated glass, tempered glass, and zoned tempered glass, which effectively enhance the performance of automotive glass. Today, most passenger car windshields are made as a single large curved piece with certain curvatures on all sides. Due to factors such as vehicle model, strength, insulation, and assembly, the processing and fitting precision of such curved glass are extremely demanding.
20
5
Share

Under what circumstances should the S gear of Lavida be used?

The usage scenarios of Lavida's S gear: 1. Used when the car needs rapid acceleration; 2. Can be engaged when the car is overtaking or climbing a slope; 3. When driving in extremely congested road sections, engine carbon deposits will increase. Proper use of the S gear helps clean the car's carbon deposits and prolong the engine's lifespan; 4. The S gear can also be selected when using air conditioning in summer. The S gear is the car's sport mode, which improves the engine's working efficiency by altering the engine's speed and fuel injection volume, allowing the engine to maintain high-speed operation for a longer duration. The Lavida is an independently developed A-class car under Shanghai Volkswagen, with body dimensions of 4605mm in length, 1765mm in width, 1460mm in height, and a wheelbase of 2610mm.
3
5
Share

How to Remove the Wrench Symbol on the Dashboard?

Methods to remove the wrench symbol on the dashboard: 1. DIY removal: Adjust the dashboard display to show the remaining mileage, then turn off the dashboard. When turning it back on, press and hold the right control bar for 5 seconds within the first 3 seconds of the dashboard lights illuminating to remove the symbol. 2. Professional removal: After maintenance, have a professional technician at a car 4S store or repair shop reset and remove it. The appearance of the wrench symbol light on the dashboard serves as a reminder for the owner that the car requires maintenance. Typically, this light illuminates when the vehicle reaches a preset mileage, indicating it's time for a service. The specific timing varies by car model, so refer to the vehicle's user manual for accurate information.
15
2
Share

How to Use the One-Touch Window Control Function with the Santa Fe Key?

Santa Fe keys do not have the one-touch window control function. The one-touch window control buttons for the Santa Fe are located on the driver's door armrest. Press the switch to the first position and hold it until the window moves to the desired position. Press it to the second position, and the window will automatically lower. One-touch window control refers to a system where the car window glass can be controlled to move up or down to the desired position with a single press of a button. Cars equipped with one-touch window control typically have two-position window control switches. Taking the 2019 Santa Fe as an example, it is a 5-door, 6-seat SUV with body dimensions of 4930mm in length, 1910mm in width, and 1720mm in height, and a wheelbase of 2865mm.
2
0
Share

How to Fold the Rearview Mirror on a Civic?

The method to fold the rearview mirror on a Civic is: firmly push the mirror backward, being careful not to use excessive force, lift it upward, and adjust it to the desired position. This vehicle is not currently equipped with the power folding function for rearview mirrors. If needed, electric folding can be achieved through aftermarket modifications. Rearview mirrors with folding capability can be retracted when navigating narrow passages, improving the vehicle's maneuverability. When the driver leaves the car, the mirrors can also be folded, not only protecting the mirror surface but also reducing parking space to avoid scratches on the mirrors. The Civic is a sporty A-class sedan under Honda, equipped with two types of engines: a 1.0L turbocharged engine and a 1.5L turbocharged engine. The vehicle dimensions are 4658mm in length, 1800mm in width, 1416mm in height, with a wheelbase of 2700mm.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.