Can Motorcycle Secondary Combustion Be Blocked?

Is the Cruze a Domestic or Joint Venture Brand?

The Cruze is a domestic brand. The Cruze MONZA is equipped with SAIC-GM's new-generation Ecotec dual-injection turbocharged engine. The 320T model delivers a maximum power of 92 kW and a peak torque of 170 N·m, paired with a 6-speed DCG intelligent dual-clutch transmission or a 6-speed enhanced manual transmission. It maintains over 90% of maximum torque output within a broad platform range of 1600 to 5200 rpm. The Cruze comes standard with LED lighting technology, utilizing class-leading light guides and thick-wall LIGHTINGBLADE double-layer light guide technology.

18

3

Share

Can a Nail Puncture in the Tire Sidewall Be Repaired?

Tire sidewall punctures cannot be repaired. The sidewall is the weakest part of a tire, consisting of two layers of rubber and two layers of fabric cords. To enhance shock absorption, passenger car tire sidewalls do not incorporate steel belts, and the sidewall undergoes continuous deformation and recovery during rotation. Therefore, if a nail punctures the tire sidewall, the tire should be replaced. Situations requiring tire replacement include: 1. A puncture hole in the tread with a diameter exceeding 6 millimeters; 2. Deformation of the bead or tread, rubber corrosion, or tire damage due to underinflation; 3. The tire has been patched more than four times. Besides nails, stones lodged in the tread grooves can also damage tires. Some sharp stones can quickly cause tire damage through repeated rolling.

3

5

Share

When Does the Driving License Point System Reset?

Driving license point reset time: Calculated from the date of initial issuance of the motor vehicle driving license. For example, if your license was issued on January 1st, then every year on this day, the points on your driving license will be reset, and this cycle continues accordingly. The scoring cycle for a driving license is 12 months, with a maximum of 12 points. If the accumulated penalty points during a scoring cycle do not reach 12, the point system will automatically reset the accumulated points from the previous cycle at the start of the next cycle. However, if you accumulate 12 points, you must attend a study session and pass an exam at the vehicle management office where the license was issued or where the violation occurred to have your points reset. Otherwise, your driving license cannot be used normally.

5

0

Share

How to close the hood of the Nissan Sylphy?

Steps to close the hood of the Nissan Sylphy: 1. Lower the hood support; 2. Hold the hood with the other hand and slowly move it downward; 3. When the hood is about 50mm to 60mm from closing; 4. Release it to let it fall freely; 5. You will hear a 'clunk' sound when it is closed. Steps to open the hood of the Nissan Sylphy: 1. Locate the hood release switch inside the car; 2. It is under the left side of the dashboard; 3. Gently pull the hood release switch; 4. The hood will open slightly; 5. Go to the front of the engine compartment and reach into the gap; 6. There is a latch inside that needs to be pulled upward; 7. Open the hood.

17

3

Share

What is the correct procedure for starting a manual transmission car?

The correct steps for starting a manual transmission car are as follows: 1. Before starting, ensure the gear is in neutral and the handbrake is engaged; 2. Depress both the brake and clutch pedals; 3. Insert the key into the ignition switch and turn it clockwise through two positions - the first position is the ON position, which powers the car's electrical systems but does not start the engine, and the second is the START position. Hold the key in the START position for two seconds until the engine starts; 4. To prevent rolling, keep both feet on the clutch and brake pedals after starting. In the semi-engaged clutch state, monitor the engine speed. When the tachometer shows the speed is around 1000 RPM, you can release the brake with your right foot, gently press the accelerator to increase speed, and gradually release the clutch completely during acceleration.

2

3

Share

What are the techniques for turning while driving on the road?

Techniques for turning while driving on the road: 1. Control the speed properly; 2. When turning right, try to make a small turn; 3. When turning left, try to make a wider turn; 4. Check the rearview mirror carefully; 5. Control the steering wheel properly. Before starting the turn, enter the curve from the outer side, then drive close to the inner side of the curve in the middle, and stay close to the inner side of the curve at the apex. After passing the apex, steer back to the outer side and exit the curve along the outer side. Techniques for right-angle turns: 1. Start the car in a low gear; 2. Drive close to the right side before entering the right-angle turn, keeping the right wheels about 0.1m away from the right edge of the road; 3. When the car aligns with the inner right-angle point, quickly turn the steering wheel to the limit position; 4. When the left rear wheel passes the inner right-angle point, gradually steer back to the right to exit the curve; 5. Straighten the car and exit the curve.

7

2

Share

Can Motorcycle Secondary Combustion Be Blocked?

Is the Cruze a Domestic or Joint Venture Brand?

Can a Nail Puncture in the Tire Sidewall Be Repaired?

When Does the Driving License Point System Reset?

How to close the hood of the Nissan Sylphy?

What is the correct procedure for starting a manual transmission car?

What are the techniques for turning while driving on the road?

Can Car Tires Be Inflated with a Bicycle Pump?

How to Correctly Measure Engine Oil Level?

What to Do When the ESC System Fails and the Car Won't Start?

How often do 7-seater vehicles need inspection?