Can Motorcycle and Car Driving Licenses Be Taken Together?

1 Answers
HarrisonRose
07/29/25 7:45pm
Motorcycle and car driving licenses cannot be taken together. According to relevant regulations: 1. Additional License: If you already hold a motor vehicle driving license and wish to apply for an additional license category, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before the application. 2. Time Requirement: You must wait for one year after obtaining either a motorcycle license or a car license before applying for the other. Additional Information: For applying to add medium-sized buses, trailers, or large buses to your license categories, the following regulations must also be met: 1. Regulation 1: To apply for a medium-sized bus license category, you must have held a city bus, large truck, small car, small automatic transmission car, low-speed cargo truck, or three-wheeled car license for at least three years and must not have accumulated 12 penalty points in the three most recent consecutive scoring cycles before the application. 2. Regulation 2: To apply for a trailer license category, you must have held a medium-sized bus or large truck license for at least three years, or a large bus license for at least one year, and must not have accumulated 12 penalty points in the three most recent consecutive scoring cycles before the application. 3. Regulation 3: To apply for a large bus license category, you must have held a city bus, medium-sized bus, or large truck license for at least five years, or a trailer license for at least two years, and must not have accumulated 12 penalty points in the five most recent consecutive scoring cycles before the application.
Was this review help?
2
0
Share
More Forum Discussions

What Causes Hybrid System Failure?

It may be caused by an abnormality in a small component leading to a chain reaction in the entire system, or it could be due to mutual influence between multiple components or parts resulting in direct catastrophic failure of a specific part. It is advisable to promptly visit a 4S shop for inspection and repair. Below is an introduction to hybrid systems: 1. Introduction: Hybrid generally refers to oil-electric hybrid, which is a combination of fuel (gasoline, diesel, etc.) and electric energy. 2. Overview: Hybrid means the vehicle uses both gasoline and electric power as driving methods. 3. Advantages: The advantage lies in the fact that when the vehicle starts and stops, it is solely driven by the electric motor. The engine does not work until a certain speed is reached, thus keeping the engine always in the optimal working condition with good power performance and very low emissions. Moreover, the source of electric energy comes from the engine, so only refueling is needed.
12
4
Share

Is the Vellfire 4WD?

The Vellfire is a 4WD vehicle. The Toyota Vellfire is equipped with the THS-II hybrid system, which consists of a 2.5L naturally aspirated engine and an electric motor, and comes standard with E-Four electronic four-wheel drive. Advantages of 4WD: 4WD is the drivetrain configuration with the highest cornering limits on roads, allowing each wheel to receive the optimal driving force when the vehicle is cornering at high speeds. As a result, this technology is widely adopted by high-displacement sedans that prioritize handling performance, with the main purpose of installation being to enhance effective driving force and cornering limits. Disadvantages of 4WD: The structure of 4WD is relatively complex, with higher costs and larger space requirements, making it less suitable for installation in lower-positioned or smaller-sized models. Additionally, 4WD consumes power, and its transmission efficiency is lower than that of two-wheel drive. For models that emphasize fuel economy or have smaller engine power, full-time 4WD is also not very suitable for installation.
12
4
Share

Where Can You Usually Buy Car Stickers?

Car stickers are usually sold at auto beauty shops. Sports Stickers: Sports stickers mainly refer to motorsport stickers, with different designs for circuit racing and rally racing, depending on the car models and tracks used. Rally car stickers prominently feature the team's logo and the main sponsors' logos, with colors matching the team's overall VI design style to better achieve promotional effects. Circuit racing car stickers often feature dynamic patterns like flames, checkered flags, and waves, adding excitement to the motorsport. Custom Stickers: Custom stickers are those designed by various tuning manufacturers for exhibitions or new product promotions. These stickers are often tailored to specific car models or products, featuring vibrant and eye-catching designs. Many patterns include the tuning company's logo or the logos of tuning products, carefully designed and matched to complement the modified show cars. Personalized Stickers: Personalized stickers are custom-made according to the car owner's preferences and tastes. Whether sporty, artistic, or practical, as long as the design looks harmonious and aesthetically pleasing, owners can freely choose, mix, and design their own stickers to create a unique style.
16
5
Share

What is the method to reset the BMW onboard computer?

The method to reset the BMW onboard computer is to disconnect the positive and negative terminals of the battery, reconnect the battery, turn the key to the ON position and then to the OFF position, turn the key to the ON position again, and then start the engine. Introduction to the onboard computer: The car onboard computer is generally used in fuel injection vehicles. It is mainly used to control fuel injection quantity, air-fuel mixture ratio, etc. It consists of a microcomputer and peripheral circuits. The microcomputer integrates a microprocessor (CPU), memory, and input/output interfaces on a single chip. Components of the onboard computer: The main part is the microcomputer, with the CPU being the core component. The ECU converts input signals into digital form, processes them by comparing with stored reference data, calculates output values, and then amplifies the output signals to control several servo components. The onboard computer can display real-time fuel consumption, average fuel consumption, remaining fuel, driving range, engine speed, intake pressure, acceleration performance, coolant temperature, and other basic data. Most importantly, it can display vehicle fault information.
11
1
Share

What is the dashboard fault code?

Car dashboard fault code icons represent various components of the vehicle. Below is an introduction to warning lights: Introduction to warning lights: There are handbrake indicator light, brake system fault warning light, steering system fault warning light, tire pressure abnormal warning light, lighting system fault warning light, transmission fault warning light, wiper fault warning light, general fault indicator light, anti-lock braking system (ABS) indicator, traction control indicator, airbag (SRS) warning light, etc. When starting the ignition, all lights will illuminate for system self-check and automatically turn off after completion. If a light doesn't illuminate when turning on the ignition, remains lit continuously, or lights up during driving, it indicates a fault in the corresponding system. Solutions for illuminated warning lights: When a red warning light appears on the dashboard, the vehicle must stop immediately and the engine should be turned off - continued operation is prohibited. The vehicle can only be used after identifying and eliminating the fault; Yellow warning lights indicate caution - certain vehicle systems may have parameters exceeding set ranges. The vehicle can continue operating at this time, but avoid aggressive driving and overloading. Have the fault diagnosed at a repair shop as soon as possible.
10
5
Share

What does the GPS light on the dashboard indicate?

The indicator light of the car GPS tracker primarily displays the operational status of the hardware. Through the display pattern of this indicator, engineers can intuitively determine the working condition of the GPS tracking device. The GSM light on the car GPS tracker indicates the working status of the communication signal, typically represented by a red light. Under normal operation, a steady red light indicates that the device is functioning properly. If the light is flashing, it means the car GPS tracker is not receiving GSM signals or there is no SIM card inserted inside the tracker. If the GSM light is flashing, it is necessary to check whether the GSM antenna is connected incorrectly or verify if there is communication signal coverage in the local area. The GPS light on the car GPS tracker indicates the working status of the GPS, usually represented by a green light. Under normal operation, a steady green light indicates proper functioning. When the green light flashes slowly, it means the car GPS tracker has successfully located its position. A fast-flashing green light indicates that the car GPS tracker is searching for GPS signals. If the GPS light is flashing, check whether the GPS antenna is connected incorrectly or if there is any metal obstruction above the GPS antenna. Additionally, avoid checking the indicator lights indoors or in basements.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.