Can Michelin Tires with Cracks Continue to Be Used?

What Causes No Sound When Connecting Bluetooth in Volkswagen Cars?

The call volume on the phone may not be turned on. Alternatively, the volume on the car's navigation system or integrated unit might be off, both of which can result in no sound when Bluetooth is connected. Avoid Using in High Temperatures: Car Bluetooth MP3 devices should not be used in high temperatures. Especially during summer when the car interior temperature is excessively high (typically above 45 degrees Celsius), remember to unplug the car charger. Additionally, avoid knocking, dropping, or vibrating the Bluetooth MP3 during normal use, as this can easily damage the internal circuit board. Prevent Bluetooth from Getting Wet: Car Bluetooth MP3 devices should also be kept away from water or prolonged exposure to humid environments, as internal components may oxidize or corrode.

10

0

Share

What Brand is H?

There are two car brands with the H logo: one is a circle with a straight H, which is Honda. The other is a circle with a slanted H, which is Hyundai. Honda: Honda, officially known as 'Honda Motor Co., Ltd.', is a multinational automobile manufacturer listed on both the Tokyo Stock Exchange (TYO) and the New York Stock Exchange (NYSE). Hyundai: Hyundai (English: Hyundai) is a car brand under Hyundai Motor Company, a Fortune 500 company. Its main models include the Sonata, Elantra, Santa Fe, and Tucson. Founded in 1947, Hyundai is a South Korean car brand primarily producing SUVs and family sedans with engine displacements ranging from 1.6L to 2.7L.

11

4

Share

What items are included in the first maintenance and inspection?

The first maintenance at a 4S shop includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the fluid levels of various oils to ensure they are normal, inspecting the generator belt and wiper blades for any damage; checking the tire pressure for normal levels and examining the tires for uneven wear, bulges, or damage; inspecting the chassis, including the brake pads, brake discs, connecting rods, ball joints, CV joints, and checking for any scratches, etc.; examining all the switches in the vehicle; ensuring the lights are functioning properly. Estimated time: Completing all the work takes approximately 2 hours. Items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; vehicle purchase invoice. Take these to the designated first maintenance facility for the vehicle's first maintenance. Note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific time varies by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither early nor delayed. The completion of the first maintenance marks the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The first maintenance time is calculated based on the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever comes first will be the standard. The following inspections and replacements must be completed during the first maintenance of a new car: changing the engine oil, cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is normal; inspecting the vehicle's brake system and the level of the clutch fluid; checking the power steering fluid level for normal conditions and examining all fluid pipe connections for leaks; inspecting the generator, air conditioning, water pump, and the condition of the belts for aging and tension; checking the tire pressure and wear condition, inflating the tires as needed, or performing tire rotation if wear is observed. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car with water: Many people clean their cars themselves during holidays, washing the body with water and scrubbing with a cloth. It is important to note that the interior of the car should not be washed directly with water. If the floor mats are dirty, use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry naturally but will flow through the drainage holes to areas like the transmission, causing corrosion. The best practice is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the existing antifreeze and refill it with the same brand from the beginning. Different brands of antifreeze have significantly different chemical properties. The corrosion inhibitors in one brand may corrode those in another. Therefore, do not mix different brands of antifreeze to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When the bolts on a car become rusty during driving, some people apply oil to make them work smoothly again. However, lubricating the bolts and nuts on the wheels can pose safety risks. At high speeds, the bolts and nuts may loosen or even fall off, leading to driving failures. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) car: The starter of an EFI car is different from that of a conventional car. Its fuel injection control system can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

2

3

Share

How to Adjust the Headlight Height of Changan CS55?

Changan CS55 headlight height adjustment method is as follows: The adjustment switch uses a roller adjustment, located on the left side of the cockpit. The roller is marked with numerical gears, where the height of the number indicates the height of the headlight—the higher the number, the higher the headlight position. Below is an introduction to the selection of light gears: 1. Position 0 is the initial position, usually when there is only the driver or the driver plus one front passenger in the car. 2. Position 1 is when all seats are occupied, and there is no cargo in the trunk. 3. Position 2 is when all seats are occupied, and the cargo weight in the trunk is evenly distributed. 4. Position 3 is when there is only the driver, and the cargo weight in the trunk is evenly distributed.

7

2

Share

Why Does the Car Make Strange Noises and Fail to Start When Igniting?

Car ignition with strange noises and failure to start is due to car battery damage, fuel quality issues, adding water or using low-quality coolant, and excessive carbon buildup. Reasons for excessive carbon buildup: Gasoline contains impurities. When the car is turned off, the spark plug cuts off power, resulting in incomplete combustion of some combustible mixtures. The oil vapor in the crankcase forced ventilation system forms carbon deposits. Reasons for battery damage: Repeatedly starting or igniting the vehicle in a short period causes the battery to discharge large currents repeatedly. Due to driving skills, some car owners frequently stall while driving, leading to frequent starts. Otherwise, the battery frequently supplying strong current to the starter will cause its own wear. Additionally, not turning off the air conditioning when the engine is off.

2

Share

What Are the Reasons for Steering Wheel Vibration at High Speeds?

Steering wheel vibration at high speeds may be caused by issues with the chassis suspension components, drivetrain system, or tire dynamic balance. Precautions for driving on highways: Avoid sudden stops on highways, pay attention to warning signs, and do not throw objects on the highway. When driving on highways, if overtaking is necessary, try to overtake from the left side. If the vehicle breaks down and requires stopping for repairs, turn on the right turn signal in advance to exit the driving lane, park in the emergency stop lane, turn on the hazard lights, and place a warning sign 150 meters behind the vehicle. The function of the steering wheel: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required from the driver when turning. The steering intermediate shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel in the vehicle more reasonable.

17

5

Share

Can Michelin Tires with Cracks Continue to Be Used?

What Causes No Sound When Connecting Bluetooth in Volkswagen Cars?

What Brand is H?

What items are included in the first maintenance and inspection?

How to Adjust the Headlight Height of Changan CS55?

Why Does the Car Make Strange Noises and Fail to Start When Igniting?

What Are the Reasons for Steering Wheel Vibration at High Speeds?

What to Do When Brake Calipers Rust?

What is the penalty for going straight in a left-turn lane at a three-way intersection?

How to Start Driving Quickly and Smoothly?

Why does the motorcycle jerk and surge when accelerating at low speeds?