Can MAXAC and AC be turned on simultaneously?

How to Determine if the Steering Ball Joint Has Issues?

Problems with the steering ball joint can cause the following symptoms in a car: deviation while driving, unusual noises during operation, increased play in the steering wheel, steering wheel vibration, and difficulty in turning. Below is relevant information: 1. If the inner ball joint is damaged, there will be significant play when turning left or right, unstable steering direction while driving, unusual sounds when turning, or a sensation similar to the brakes being stuck. The steering gear, also known as the steering box, is the most critical component of a car's steering function. 2. Most newly released models are now equipped with electro-hydraulic or electric power steering systems, while mechanical steering gears are gradually being phased out. Generally, vehicle steering wheels have an automatic return-to-center function. For cars equipped with hydraulic power steering, this function is somewhat weakened due to the hydraulic damping effect.

6

2

Share

Right Side Brake or Left Side?

In manual transmission vehicles, the right pedal is the accelerator; the middle pedal is the brake; and the left pedal is the clutch. Here is some relevant information: 1. For automatic transmission models, based on ergonomic design, most people are accustomed to using their right hand and right foot, making the right side more flexible and powerful. Since the accelerator needs to be pressed continuously and the brake requires quick and easy access, both the brake and accelerator are designed on the right side. The brake and accelerator pedals are placed on the front side of the right foot, with a certain gap between them, and the brake pedal is slightly higher than the accelerator pedal. This design facilitates quick reactions from the driver. The correct operating method is to pivot the right heel and use the sole of the foot to press the pedals. 2. For manual transmission models, the driver's two legs need to control three pedals, and it is impossible to press the brake and accelerator simultaneously. If an accidental operation causes both pedals to be pressed, the vehicle's electronic system will intervene, and the ECU will prioritize braking. Therefore, the left foot controls the clutch, while the right foot controls the brake and accelerator, which is the most scientific design.

19

3

Share

How to tell if the fuel filter is dirty?

If you notice increased fuel consumption and unstable idle speed, it's likely that the fuel filter is dirty and needs replacement. Here are some precautions for filter replacement: 1. Before removing the fuel filter, always follow the manufacturer's specified steps to release residual pressure in the fuel system. Otherwise, gasoline may spill, which could pose serious personal safety risks. 2. During the fuel filter replacement process, absolutely avoid smoking or using open flames nearby, as this presents significant safety hazards. 3. Additionally, when replacing the fuel filter, it's advisable to also replace the engine oil, oil filter, and air filter. Filters have inlet/outlet arrow markings - be careful not to install them backwards during replacement.

16

2

Share

Where is the cabin air filter located in the Ford Explorer?

Ford Explorer's cabin air filter is located behind the glove box on the passenger side. After removing the glove box, you can see the cover of the cabin air filter, and opening the cover allows you to replace the filter. The main function of the cabin air filter is to filter impurities from the air, providing clean air for the engine's operation. The Ford Explorer is a large SUV introduced by Ford, with dimensions of 5064 mm in length, 2005 mm in width, 1798 mm in height, and a wheelbase of 3025 mm. The Ford Explorer comes standard with a 12.8-inch central control screen, featuring the SYNC+ 2.0 intelligent infotainment system. The instrument panel adopts a full LCD mode, allowing theme changes corresponding to sport, economy, and snow modes. The steering wheel supports four-way electric adjustment, and the multifunction buttons include multimedia control, adaptive cruise control, and voice recognition functions.

7

0

Share

Do you need to press the clutch when starting a manual transmission car?

Starting a manual transmission car requires pressing the clutch, although it is possible to start without doing so. However, long-term practice of this can cause significant damage to the car. During the starting process, the starter motor experiences a high instantaneous current, effectively operating under overload conditions. By pressing the clutch, the power connection is cut off, making the starting process feel quicker and smoother. The clutch's function is to ensure that the engine's crankshaft can either transmit or interrupt power to the transmission system as needed for driving conditions. It facilitates smooth starts, easier gear shifts, and prevents overload in the drivetrain.

13

3

Share

How are sedans classified into A, B, and C levels?

Sedans are classified into A, B, and C levels as follows: A-class cars refer to compact sedans, B-class cars refer to mid-range sedans, C-class cars refer to premium sedans, and D-class cars refer to luxury sedans. The classification is primarily based on parameters such as wheelbase, engine displacement, and weight. The further the letter in the alphabet, the longer the wheelbase, the larger the displacement and weight, and the higher the level of luxury in the sedan. A00-class cars are entry-level models, while D-class cars are high-end models. For example, a B-class car is one level higher than an A-class car. Within the same brand, B-class cars outperform A-class cars in terms of craftsmanship, materials, and configuration.

2

4

Share

Can MAXAC and AC be turned on simultaneously?

How to Determine if the Steering Ball Joint Has Issues?

Right Side Brake or Left Side?

How to tell if the fuel filter is dirty?

Where is the cabin air filter located in the Ford Explorer?

Do you need to press the clutch when starting a manual transmission car?

How are sedans classified into A, B, and C levels?

Why doesn't the car move after shifting into gear in an automatic transmission?

When did China 6 start to be implemented?

What is the recommended speed during the car break-in period?

Is a Renewal Insurance Deposit Required for Car Loans?