Can logging trucks use highways?

1 Answers
RyderFitz
07/25/25 12:38am
Logging trucks can use highways, but they need to apply for oversized transport permits, otherwise they are not allowed. Check tire pressure before entering the highway: When tire pressure is low and vehicle speed is high, abnormal internal heat buildup in the tires can cause separation between rubber layers or disintegration of the outer tread, leading to blowouts and potential accidents. Always check tire pressure before entering highways and repair any abnormalities immediately. Check brakes before entering the highway: Braking effectiveness is especially important for highway driving. Before departure, perform low-speed tests to check braking performance. Any abnormalities must be repaired immediately, as they could otherwise lead to serious accidents.
Was this review help?
5
1
Share
More Forum Discussions

Where is the emergency release cord for the Sagitar fuel tank cap?

The emergency release cord for the fuel tank cap is generally located inside the right-side trim cover of the trunk, appearing as a red plastic rope. Typically, there are three methods to open a car's fuel tank cap: press-to-open, switch button, and mechanical key. Here are the specific details: 1. Press-to-open: This is the simplest method. When the vehicle is unlocked, you can directly press the fuel tank cap with your hand to open it. Note that the fuel tank can only be opened when the car is unlocked; it remains inaccessible when the car is locked. This method is commonly found in German and American cars. 2. Switch button: This type of fuel tank cap is controlled by a switch button inside the car. The location of this switch varies among different car models. Generally, in economy cars, the switch is located on the floor to the left of the driver's seat. In more upscale vehicles, the switch is designed as an electronic button, placed either on the left front door panel or the center console, marked with a fuel pump icon, making it easy to identify with a little attention. This design is typically used in Japanese and Korean car models. 3. Mechanical key: This method is becoming increasingly unpopular due to the inconvenience of using a key to open the fuel tank cap. It involves directly using the key to unlock the cap. This design was more common in older American and French cars and is now rare, with only a few off-road vehicles still using it.
1
5
Share

What are the categories of vehicles?

Automobiles are divided into several types, including cargo trucks, off-road vehicles, dump trucks, tractors, special-purpose vehicles, buses, passenger cars, and semi-trailers. Classification of road vehicles in China: According to the 2005 automotive statistical classification standard, vehicles are categorized into passenger vehicles and commercial vehicles. Passenger vehicles refer to those with fewer than nine seats, primarily designed for passenger transport. Passenger vehicles are further classified into basic passenger cars (sedans), MPVs, SUVs, and other types such as pickup trucks. Commercial vehicles refer to those with nine or more seats or those designed primarily for cargo transport. They are specifically divided into buses, trucks, semi-trailers, incomplete buses, and incomplete trucks. International standard vehicle classification: The International Organization for Standardization (ISO) is responsible for the formulation and management of road vehicle standards. In international standards, there is only a terminology standard for vehicles, not a classification standard. "Road vehicles — Types — Terms and definitions" serves as the common standard for vehicle nomenclature in all international standards. The standard is highly normative in terms of terminology usage, with virtually no instances of the same concept being referred to by different terms or different concepts by the same term across different standards. The hierarchy of terms in the standard is clearly delineated.
15
5
Share

Where is the Position Light Button Located?

Position light button is located on the left side of the steering wheel. Turn the headlight switch to the right once to activate the position lights. Introduction to Position Lights: Position lights are width-indicating lights installed on vehicles, serving as common lights to display the vehicle's width and alert other drivers. They are used during dusk driving to enhance visibility for other vehicles. Position lights are mounted along the top edges of vehicles, indicating both height and width. Safety regulations mandate that vehicles over three meters in height must be equipped with position lights. Uses of Position Lights: When temporarily parked by the roadside at night, position lights should be illuminated; On well-lit roads, they can serve as driving lights without needing headlights; During rain, snow, fog, or other conditions with poor visibility, position lights should be turned on to alert passing vehicles.
4
5
Share

Why Are Cruiser Motorcycles Called Cruiser Motorcycles?

Because cruiser motorcycles have a mature design and a limited target audience, hence the name "cruiser motorcycles". Mature design: Cruiser motorcycles typically feature a high handlebar and low seat design, which gives them a relatively more mature appearance and riding posture. While riding such a bike may look very imposing for young people, compared to street bikes or sports bikes, it can seem a bit outdated. This is similar to the difference between a Maybach and a Ferrari—Maybach is excellent, but young people tend to prefer Ferrari. Limited target audience: Cruiser motorcycles give off a more mature vibe, so riders of these bikes are often older. In overseas markets, middle-aged people may ride motorcycles more frequently, but in China, consumers of that age tend to focus more on family responsibilities. Very few maintain the passion for riding motorcycles, so there aren't many middle-aged buyers for cruiser motorcycles, and younger people generally don't favor them either.
8
0
Share

How many kilowatt-hours does the 2021 Ant EV take to fully charge?

Electric vehicle Ant EV requires 0.6 kWh for charging. Electricity consumption calculation: In reality, EV batteries are not allowed to be completely discharged, so charging won't be at full capacity either. Typically, an EV battery has 10Ah capacity. Calculating with 48V voltage (some have 36V), and considering the charging voltage needs to be slightly higher at 60V, this results in 600Wh. This means a full charge consumes 0.6 kWh. EV charging precautions: For a new EV's first charge, it's best to charge for up to 12 hours to fully activate the battery's performance. For regular charging, avoid overcharging - generally 6-8 hours is sufficient. Prolonged charging, such as exceeding 9 hours or overnight, can easily damage the battery. To prevent overcharging, consider purchasing a timer to set a 6-8 hour countdown.
16
0
Share

Is a Crawler Crane Considered Special Equipment?

Crawler cranes are classified as special equipment. Crawler Crane: It is a self-propelled crane used in high-rise building construction. This type of crane utilizes crawler tracks for mobility and features a rotating boom. With large ground contact area, it offers excellent passability and adaptability, capable of traveling with loads, making it suitable for lifting operations at construction sites. It can perform various tasks including excavation, soil compaction, and pile driving. However, due to its slow travel speed, long-distance site transfers require transportation by other vehicles. Advantages of Crawler Cranes: Crawler cranes provide flexible operation and user-friendly handling, with substantial lifting capacity. They can travel with loads on flat and solid surfaces, and by changing attachments, can be converted into excavators or pile drivers, making them versatile machinery. However, their slow travel speed and high road surface damage potential necessitate transportation via flatbed trailers or railroad flatcars for long-distance relocations.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.