Can LED headlights pass the annual inspection?

How to Determine if the Car Body is Straight?

Methods to determine if the car body is straight: 1. Check if the front windshield washer nozzles align with your line of sight or use a reference object to compare with the car body; 2. Use the rearview mirrors to observe whether the car body is parallel to parking lines; 3. See if the left front door handle is parallel to nearby lines; 4. After parking straight, get out and check, then get back in to observe the parked position, repeat several times to establish a reference; 5. If there are parked cars nearby, check if the lower window edges align parallel with adjacent vehicles. Methods to correct car body alignment: 1. Adjust using the steering wheel; 2. Observe through rearview mirrors.

5

Share

How to Remove the Wiper Blades on a Peugeot 206?

To remove the wiper blades on a Peugeot 206: 1. Lift the wiper arm away from the windshield and stand it upright; 2. Press the tab and remove the old wiper blade to separate it from the metal arm. Precautions for using the wiper blades on a Peugeot 206 include: 1. When using the wipers to remove dust from the glass on sunny days, always spray windshield washer fluid and avoid dry wiping; 2. Manually clean any stubborn or hard debris on the windshield; 3. When lifting the wiper blades during car washing or routine cleaning, hold them by the spine. The Peugeot 206 is a compact car with exterior dimensions of 3873 mm in length, 1673 mm in width, and 1435 mm in height, with a wheelbase of 2443 mm.

7

5

Share

What is the Scrap Life of Private Cars?

For domestic 5-seat sedans and 7-seat SUVs, as well as non-operational small and mini vehicles, there is no usage lifespan limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above-mentioned vehicles, small and mini non-operational passenger vehicles, large non-operational sedans, and wheeled special machinery vehicles also have no usage lifespan limit. Operational vehicles have scrap life limits, as follows: Small and mini taxi passenger vehicles have a scrap life of 8 years, medium-sized taxi passenger vehicles have a scrap life of 10 years, and large taxi passenger vehicles have a scrap life of 12 years. Bus passenger vehicles have a scrap life of 13 years, other small and mini operational passenger vehicles have a scrap life of 10 years, and large and medium operational passenger vehicles have a scrap life of 15 years. Mini operational trucks have a scrap life of 8 years, light and large operational trucks have a scrap life of 10 years. The vehicle scrapping process is as follows: The car owner applying for scrapping and renewal should fill out a copy of the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrap life. For vehicles that have not reached the scrap life, if they are confirmed by the motor vehicle inspection office to meet the vehicle scrapping standards, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner should submit the "Change Form", "XX Province Updated Vehicle Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and vehicle dismantling photos to the motor vehicle inspection office for verification and signature. The license plates will be recycled, and the application will be submitted for approval according to regulations to complete the scrapping registration. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if the vehicle is damaged and cannot be driven back to the place of registration, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If an operational vehicle is converted to a non-operational vehicle, it must be scrapped according to the original operational vehicle's scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation registration of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application to use the original license plate number must meet the following conditions: (1) The application must be submitted within six months after the transfer or cancellation registration; (2) The owner must have owned the original vehicle for more than three years.

2

Share

What to Do When the Car's Interior Rearview Mirror Becomes Loose?

If the looseness occurs at the fixing point with the windshield, applying some glue can solve the problem. Below are the solutions for a loose interior rearview mirror: 1. If the interior rearview mirror is loose, it is usually caused by hanging a dashcam or some heavy decorations on the mirror. The solution is simple: if the looseness is at the fixing point with the windshield, apply some glue; if the ball joint of the mirror is loose, tighten the screw. 2. Most car rearview mirrors have an adjustable tension screw at the ball joint, allowing you to adjust the tightness of the mirror. If the mirror becomes loose, locate this screw and tighten it. Additionally, avoid hanging dashcams or heavy decorations on the rearview mirror, as this can lead to looseness over time.

5

4

Share

What Causes the Front Parking Sensors to Keep Beeping When There Are No Obstacles?

The reasons why front parking sensors keep beeping when there are no obstacles: 1. The sensor mounting hole is too small or too tight, or installed on an iron or hard bumper; 2. Paint sprayed on the sensor surface, or attachments like snow or ice blocks; 3. Poor sensor characteristics, with the working environment temperature being too low; 4. Sensor malfunction. The full name of the parking sensor is reverse parking collision avoidance radar, also known as a parking assist device. It is a safety assist device for car parking or reversing, consisting of ultrasonic sensors, a controller, and a display. It can inform the driver of surrounding obstacles through sound or more intuitive displays, helping to eliminate blind spots and unclear vision, thereby improving driving safety.

5

4

Share

What is the 580 car?

580 is a mid-size SUV under Dongfeng Xiaokang. Taking the Fengguang 580 2020 1.5T Manual Luxury model as an example, its dimensions are 4700mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2780mm. The body adopts a 5-door, 7-seat layout, featuring a fuel tank capacity of 58 liters, a curb weight of 1550kg, and a trunk capacity ranging from 375 to 2215 liters. In terms of power, the Fengguang 580 2020 1.5T Manual Luxury model is equipped with a 1.5L inline 4-cylinder turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 220Nm, paired with a 6-speed manual transmission, and adopts a front-engine, front-wheel-drive layout.

20

0

Share

Can LED headlights pass the annual inspection?

How to Determine if the Car Body is Straight?

How to Remove the Wiper Blades on a Peugeot 206?

What is the Scrap Life of Private Cars?

What to Do When the Car's Interior Rearview Mirror Becomes Loose?

What Causes the Front Parking Sensors to Keep Beeping When There Are No Obstacles?

What is the 580 car?

How many seats does the Audi Q8 have?

Where is the USB port of the Baojun 530 located?

What is the method for turning a car?

What colors does the Gienia come in?