Can lane changing be performed on triple dashed lines?

1 Answers
ThomasLynn
07/29/25 1:44pm
Dashed lines allow lane changing. Here is the relevant information: 1. Specific requirements: It is not allowed to cross solid white lines to change lanes into the main lane. At white dashed lines ahead, lane changing across the line is permitted only when safety is ensured. Violations incur a fine of 200 yuan and 3 penalty points. At some highway exits where solid white lines are present, crossing them to change lanes into the auxiliary lane to exit the highway is prohibited. Lane changes to exit the highway must be made in advance at white dashed lines. 2. White dashed lines: When painted on road sections, they are used to separate traffic flows in the same direction or serve as safe driving distance markers; when painted at intersections, they guide vehicle movement.
Was this review help?
10
4
Share
More Forum Discussions

Can I buy a car with bad credit on Dandan Dingche?

You cannot buy a car with bad credit on Dandan Dingche. Here is some related information about the steering wheel: Introduction to the steering wheel: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Function of the steering wheel: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel reduces the hand force required by the driver when turning. The steering intermediate shaft serves as a connecting component between the steering gear and the steering shaft, facilitating the standardization of steering gears, compensating for manufacturing and installation errors, and enabling more rational installation of the steering gear and steering wheel in the vehicle.
11
4
Share

What Are the Causes of Belt Noise During Cold Start?

The causes of belt noise during cold start are: 1. The belt tightens due to low temperature before ignition, resulting in noise; 2. Severe belt aging with its service life nearing the limit; 3. The belt is either too loose or too tight. The functions of the belt are: 1. Ensuring accurate intake and exhaust timing; 2. Synchronizing engine ignition with cylinder movement; 3. Ensuring smooth power output from the engine. The method for replacing the vehicle belt is: 1. Lift the vehicle and remove the right front wheel fender liner; 2. Remove the generator belt and the generator belt tensioner; 3. Loosen the crankshaft pulley screw; 4. Open the engine hood and remove the water tank; 5. Remove the engine mounting bracket and the protective cover on the belt; 6. Unscrew the generator fixing screw and remove the generator; 7. Remove the cylinder block mounting bracket and take off the crankshaft pulley; 8. Rotate the crankshaft to the top dead center position of the cylinder and mark it; 9. Remove the belt and the tensioner.
3
4
Share

Is the driver's license invalid if it is not obtained within three years?

If the driver's license is not obtained within three years, it will be invalid. Here is some relevant information about the driver's license test: Definition of simulation fee: The simulation fee and venue fee refer to the costs required for taking a simulated test at the exam venue. During the driver's license application process, apart from the registration fee, simulation fee, and venue fee, there are no other charges. However, the decision to take the simulated test or not is up to the individual—you can choose to simulate or not. Driver's license test: Applicants for a motor vehicle driver's license must pass the following four subjects: Subject 1—Road Traffic Safety Laws, Regulations, and Related Knowledge Test; Subject 2—Venue Driving Skills Test; Subject 3—Road Driving Skills Test; and Subject 4—Safe and Civilized Driving Knowledge Test. The test sequence follows Subject 1, Subject 2, Subject 3, and Subject 4 in order. Only after passing the previous subject can one proceed to the next subject's test.
13
2
Share

Can I Charge in the Car?

You can charge in the car. Here is the relevant introduction about electric vehicle charging: Precautions: If the charger gets wet, it can easily burn out the circuit board and control components. Additionally, if a person touches it, it may cause irreparable harm. Moreover, water entering the charger can lead to electronic component failures. If the charger remains in operation, it can overcharge the battery, causing damage. Charging Instructions: Charge according to the battery capacity, which generally takes 8-10 hours to fully charge. Disconnect the power promptly after full charge. If the power remains on for a long time, the electronic components inside the charger may overheat, potentially causing a short circuit and sparks, leading to a fire. Fires are most likely to occur at night or early morning, so it is best to charge during the day under supervision. Once the indicator light on the charger turns green, unplug it as soon as possible. The charging environment should be well-ventilated, with an optimal ambient temperature of 25 degrees Celsius. Avoid exposing the vehicle to direct sunlight or rain during storage.
11
5
Share

What is the speed limit with 200 meters visibility on the highway?

The maximum speed is 60 kilometers per hour when visibility is within 200 meters, and a distance of more than 100 meters should be maintained from the vehicle ahead in the same lane. The driver should also turn on the fog lights, low beams, clearance lights, and front and rear position lights to alert other vehicles for safety. Safe driving distances and maximum speed limits under various visibility conditions: Less than 500 meters but more than 200 meters: Low beams, clearance lights, and rear fog lights must be turned on, the speed should not exceed 80km/h, and a driving distance of more than 150 meters should be maintained. Less than 200 meters but more than 100 meters: Low beams, clearance lights, and front and rear fog lights must be turned on, the speed should not exceed 60km/h, and a driving distance of more than 100 meters should be maintained. Less than 100 meters but more than 50 meters: Low beams, clearance lights, and front and rear fog lights must be turned on, the speed should not exceed 40km/h, and a driving distance of more than 50 meters should be maintained. Less than 50 meters: Vehicles are prohibited from entering the highway. Vehicles already on the highway must turn on the relevant lights as required, exit the fog area, and the speed should not exceed 20 kilometers per hour. Introduction to highways: Highways refer to high-speed roads, compared to medium-speed and low-speed roads. In an environment where low speed is mainstream, low speed is the normal or standard speed, and where medium speed is mainstream, medium speed is the normal or standard speed. Precautions before entering the highway: Check the weather and road conditions, perform a safety check on the vehicle, study the driving route in advance, carry a vehicle breakdown warning sign and a fire extinguisher, and plan the driving and rest schedule in advance. Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that when a motor vehicle is driving and receives a signal from a vehicle behind to overtake, it must give way to the right and turn on the right turn signal if conditions permit, and must not deliberately refuse to yield or accelerate. When reversing, the driver must observe the situation behind the vehicle and confirm safety before reversing. Reversing is not allowed at railway crossings, intersections, one-way roads, curves, narrow roads, bridges, steep slopes, tunnels, or busy traffic sections.
19
1
Share

What does violation code 17123 mean?

Violation code 17123 means: Driving under the influence of alcohol with a blood alcohol content between 60 and 80 mg/100ml. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China," the penalty includes: Demerit points (deduction): 12 points; Fine amount: 2000 yuan; Additional penalties: Suspension of driver's license for 6 months. Traffic violation codes consist of four to five digits, classified according to the general principles of traffic laws. The sequence from left to right is as follows: the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category under the Road Traffic Law; Second digit: Demerit point classification code, indicating the category of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior classification. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates a deduction of 3 points, and "035" indicates the fifth item under the third category of 3-point deductions. Behavior classification code violation descriptions: Codes starting with "1" indicate motor vehicle violations, e.g., 1003. Codes starting with "2" indicate non-motor vehicle violations, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger violations, e.g., 3030. Codes starting with "4" indicate highway violations, e.g., 4002. Codes starting with "5" indicate other regulations, e.g., 5005. Codes starting with "7" indicate provincial, autonomous region, or municipal implementation rules, e.g., 7008. Codes starting with "8" indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common methods for motor vehicle violation inquiries: Visit the office halls of traffic police departments in various districts and counties to query through touch-screen terminals; Log in to the public service websites of the local public security traffic management bureaus, locate the vehicle violation query section, enter the license plate number and engine number, and click to query; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app client (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of driving under the influence with a blood alcohol content between 60 and 80 mg/100ml, it can be processed through this traffic management app. After logging in, enter the violation processing workflow, complete the process, and make the payment.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.