···
Log in / Register

Can lane changes be made to either side?

3 Answers
DeEmmett
07/29/25 1:04pm
When selecting a lane to drive in, you can change lanes to either the left or right side, depending on your actual travel direction. 1. Judgment based on actual conditions: When overtaking requires a lane change, you can only change to the left lane to overtake; changing to the rear lane for overtaking is not allowed. Therefore, whether lane changes can be made to either side depends on your actual travel needs. 2. Driving regulations: In domestic vehicles, the driver's compartment is on the left side, so drivers tend to pay more attention to the road conditions on the left side. Safety is the priority when overtaking. If overtaking is done from the right side, the vehicle originally in front may not notice the overtaking vehicle, which can easily lead to accidents.
Was this review help?
7
0
Share
ElliotMarie
08/14/25 2:27am
After driving for so many years, I believe you can change lanes to either the left or right, but you need to pay attention to different situations. When overtaking, you usually change lanes to the left because the left lane moves faster; changing lanes to the right is mainly for turning or pulling over. Before changing lanes, you must use your turn signal at least three seconds in advance to alert the cars behind you, while also checking the rearview mirror and blind spots. Be extra cautious when visibility is poor, such as during rain or at night, and leave a longer safety distance when changing lanes in either direction. I’ve seen too many drivers change lanes without signaling, leading to accidents—it’s really dangerous. Developing the habit of checking blind spots is more important than choosing which side to change lanes; safety should always come first.
Was this review help?
11
4
Share
Expand All
LaJuliet
10/09/25 7:34am
As someone who frequently commutes by car, changing lanes during rush hour is a daily routine. You can change to either the left or right lane, but there are practical differences. When changing to the left lane, pay attention to the speed of traffic in the middle lane, while changing to the right lane requires extra caution for sudden electric bikes darting out from the non-motorized lane. Before every lane change, I always double-check the rearview mirror and blind spots, especially when changing to the right lane where there are more blind spots—requiring additional head turns for better visibility. Remember to make only slight adjustments to the steering wheel; sudden turns can easily lead to loss of control. Road markings are also crucial: never change lanes over solid lines, and after changing lanes over dashed lines, immediately straighten the wheel to avoid causing a rear-end collision.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What does QFABQ script mean?

Q: Refers to a guiding, controlling question: Sometimes it can be phrased as a statement, with the purpose of making potential customers associate with a negative car usage scenario. When creating this scenario, be careful not to place the potential customer, the sales consultant themselves, the Audi brand, or the potential customer's car usage into it. This should be a general, non-specific negative scenario. F. Explain the equipment: That is, the selling points and features of the vehicle, which should be explained from the following three aspects: 1. What is this: For example, this Audi A4 is equipped with ABS, and ABS is an anti-lock braking system. 2. What is the purpose of this equipment: For example, "ABS can prevent the wheels from locking up during emergency braking, allowing the wheels to continue rotating during the braking process, thus maintaining some grip on the road at the moment of braking." 3. How does this function work, what is its principle: For example, because each wheel has a sensor that constantly monitors the rotation speed of the wheel. If a certain wheel rotates slower than the others, the ABS system will apply braking pressure in pulses (pumping the brakes) to help that wheel regain traction with the road. A.: Refers to Advantage: It is the sales consultant's statement, used to describe how this equipment improves wheel performance. For example: "Because the wheels can keep rotating in any braking situation, the vehicle can still steer under these conditions, so even during emergency braking, the vehicle can still be controlled. B.: Refers to Benefit: It is the sales consultant's statement, used to describe what this advantage can do for the vehicle's user. For example: If the vehicle can be controlled during emergency braking, it may avoid certain obstacles, and the passengers and driver will be safe. Q.: Refers to Confirming Question: This question is designed to obtain positive feedback from potential customers, meaning: they see the benefits that the sales consultant has just demonstrated to them. Such confirming questions must be clear and should elicit an affirmative response, making the customer say 'yes'."
7
3
Share

Solutions for High Water Temperature in Cruze

Solutions for high water temperature in Cruze are as follows: 1. When the engine temperature is too high, you can touch the upper and lower water pipes to judge their temperature. If there is a significant temperature difference between the two pipes, it can be determined that the thermostat is not working. Solution: If you cannot purchase the spare part immediately, you can remove the thermostat as an emergency measure and replace it as soon as you get home. 2. If there is air in the cooling system, it will form an air lock, causing poor circulation of the coolant and leading to high engine temperature. Solution: Run the engine at high speed and slightly loosen the radiator cap until gas starts to escape. Some coolant will flow out with the gas. Repeat this process several times until you feel that all the gas has been released. After troubleshooting, replenish the coolant in time. 3. If the vehicle is driven on dirt roads or muddy sections for a long time, some dirt may adhere to the radiator, which will affect the heat dissipation effect over time and cause the water temperature to be too high. Solution: Use compressed air to blow the radiator grid.
14
4
Share

Which cars have twin-turbocharging?

Cars with twin-turbocharging include the Macan, Panamera, Audi RS4, BMW M4, and others. Here are the relevant introductions for these models: 1. The Macan is currently Porsche's most affordable SUV. Despite being "affordable," it remains a highly regarded midsize luxury SUV. Its distinctive frog-like front fascia ensures strong road presence, while the overall design is stylish and handsome. As a pure import, the Porsche Macan maintains the brand's premium positioning, outperforming competitors from BBA. The Macan's engine tuning and in-house developed transmission deliver exceptional driving dynamics and handling, true to Porsche's heritage. 2. The Panamera is Porsche's only four-door GT sports car, officially positioned as a daily-drivable sports car. Its body features smooth, rounded lines without sharp angles, creating a unique silhouette. Renowned for ultimate driving dynamics, Porsche naturally excels with the Panamera's outstanding balance of handling and comfort. Available with three powertrain options (including a hybrid variant), the top model accelerates 0-100km/h in 3.8 seconds, while base models achieve 5.8 seconds. 3. The Audi RS4 is a wolf in sheep's clothing. Its wagon body style easily disguises its performance potential, appearing as a harmless grocery-getter - until the 2.9T twin-turbo engine roars to life, delivering exhilarating thrust. While the interior adopts a family-friendly design, extensive carbon fiber trim constantly reminds occupants of its high-performance nature. The generous rear cargo area enhances practicality without compromising dynamic capabilities, making this a brutally fast "grocery car." 4. The new-generation M4's controversial design features significantly enlarged kidney grilles, challenging fans accustomed to the previous generation's styling - an evolution requiring acclimatization. Performance sees meaningful upgrades over its predecessor, with 450hp and 550Nm delivering thrilling driving dynamics. The revised suspension system further enhances the M4's handling prowess.
1
4
Share

Causes of Abnormal Noises While Driving a Golf 7

Causes of abnormal noises while driving a Golf 7 are as follows: 1. Cold start, abnormal noise from the engine compartment. This may be due to the belt slipping on the generator, where intense friction and vibration between the belt and pulley produce a sound at a certain frequency. The main reason for belt slipping is belt looseness or aging. Factors that may cause belt looseness include incorrect adjustment of the belt tensioner or insufficient elasticity of the tensioner. The tension of the belt tensioner must first be adjusted. If there is no effect, replace the tensioner. 2. Abnormal noise from the steering wheel. If an abnormal sound occurs after turning the steering wheel, first check whether the steering gear oil is normal or if the power steering fluid is too low, causing the power steering pump to fail to work properly (except for electric power steering), resulting in abnormal sounds when adjusting the direction.
17
2
Share

Where is the engine number stamped on the ix35?

The engine number of the Beijing Hyundai ix35 is located on the plastic protective cover of the engine. It is generally a combination of 7 to 8 digits and English letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, and each engine can only use one engine number, with each engine's number being unique.
4
4
Share

How many types of markings allow temporary parking on the roadside?

There are 3 types of markings that allow temporary parking on the roadside. Meaning of the markings: Solid blue lines indicate free parking spaces: dashed blue lines indicate time-limited free parking; solid white lines indicate paid parking spaces: dashed white lines allow temporary parking; solid yellow lines indicate dedicated parking spaces: dashed yellow lines allow temporary parking. Precautions for roadside parking: Parking spaces with signs, markings, or indicators specifying temporary parking or time periods are temporary parking spaces; no-parking signs with a blue background, red circle, and red diagonal line indicate no long-term parking but allow temporary parking; the outermost yellow dashed line allows temporary parking, but the duration should not be too long.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.